A particle that vibrates 5 times a second and advances energy 50 cm per vibration will create a wave with a wavelength of 10 cm and the wave speed is 0.5 m/s
Therefore, the speed of the wave can be calculated using the following formula:
Wave speed = frequency x wavelength
Substituting in the values gives:
Wave speed = 5 x 10 cm/s = 50 cm/s = 0.5 m/s. Therefore, the answer is option D (0.5 m/s).
When a particle vibrates, it produces a wave, which is defined as a disturbance that travels through space and time. The wave has a certain speed, frequency, and wavelength. The wave speed refers to the distance covered by the wave per unit time. It is determined by multiplying the frequency by the wavelength.
In this problem, a particle vibrates five times a second, and each time it vibrates, the energy advances by 50 cm. The question is to determine the wave speed of the particle's vibration. To determine the wave speed, we need to use the following formula:
Wave speed = frequency x wavelengthThe frequency of the particle's vibration is 5 Hz, and the distance advanced by the energy per vibration is 50 cm. Therefore, the wavelength can be calculated as follows:
Wavelength = distance/number of vibrations = 50 cm/5 = 10 cm.
Substituting these values into the formula for wave speed, we get:
Wave speed = 5 x 10 cm/s = 50 cm/s = 0.5 m/sTherefore, the wave speed of the particle's vibration is 0.5 m/s.
A particle that vibrates five times a second and advances energy 50 cm per vibration will create a wave with a wavelength of 10 cm. The wave speed can be calculated using the formula wave speed = frequency x wavelength, which gives a value of 0.5 m/s.
To know more about frequency visit
brainly.com/question/29739263
#SPJ11
A piece of metal weighing 0.292 kg was heated to 100.0 °C and then put it into 0.127 kg of water (initially at 23.7 °C). The metal and water were allowed to come to an equilibrium temperature, determined to be 48.3°C. Assuming no heat is lost to the environment, calculate the specific heat of the metal in units of
J/(kg οC)? The specific heat of water is 4186 J/(kg οC).
The specific heat of the metal is approximately -960 J/(kg οC).
To calculate the specific heat of the metal, we can use the principle of energy conservation. The heat gained by the water is equal to the heat lost by the metal. The equation for heat transfer is given by:
Q = m1 * c1 * ΔT1 = m2 * c2 * ΔT2
where:
Q is the heat transferred (in Joules),
m1 and m2 are the masses of the metal and water (in kg),
c1 and c2 are the specific heats of the metal and water (in J/(kg οC)),
ΔT1 and ΔT2 are the temperature changes of the metal and water (in οC).
Let's plug in the given values:
m1 = 0.292 kg (mass of the metal)
c1 = ? (specific heat of the metal)
ΔT1 = 48.3 °C - 100.0 °C = -51.7 °C (temperature change of the metal)
m2 = 0.127 kg (mass of the water)
c2 = 4186 J/(kg οC) (specific heat of the water)
ΔT2 = 48.3 °C - 23.7 °C = 24.6 °C (temperature change of the water)
Using the principle of energy conservation, we have:
m1 * c1 * ΔT1 = m2 * c2 * ΔT2
0.292 kg * c1 * (-51.7 °C) = 0.127 kg * 4186 J/(kg οC) * 24.6 °C
Simplifying the equation:
c1 = (0.127 kg * 4186 J/(kg οC) * 24.6 °C) / (0.292 kg * (-51.7 °C))
c1 ≈ -960 J/(kg οC)
The specific heat of the metal is approximately -960 J/(kg οC). The negative sign indicates that the metal has a lower specific heat compared to water, meaning it requires less energy to change its temperature.
Learn more about heat from the given link
https://brainly.com/question/934320
#SPJ11
Show that the physical quantity (0o = "/e) has the units of Flux in SI units.
The physical quantity Φ = E·A does indeed have the units of Flux in SI units.
The physical quantity Φ = E·A, where Φ represents the electric flux and E represents the electric field intensity. We want to show that Φ has the units of Flux in SI units.
The electric flux can be defined as the measure of electric field lines that penetrate or pass through a specified area. It is measured in Coulombs (C). The SI unit for electric field intensity is Newtons per Coulomb (N/C), also known as Volts per meter (V/m).
The electric field area, A, is measured in square meters (m^2), which is the SI unit for area.
To determine the units of Φ, we can substitute the units for E and A into the equation Φ = E·A:
Φ = (N/C)·(m²)
Multiplying Newtons per Coulomb by square meters gives us the units of:
Φ = N·m²/C
In SI units, N·m²/C is equivalent to Coulombs (C), which is the unit for Flux.
Therefore, the physical quantity Φ = E·A does indeed have the units of Flux in SI units.
Learn more about Flux at: https://brainly.com/question/26289097
#SPJ11
a boy at the pier observes the ocean waves and notices that 5
crests pass by in a 4s time interval. given that the distance
between two consecutive wave crests is 5m, what is the speed of the
passing
Observing 5 wave crests passing in 4 seconds with a distance of 5m between each, the speed is 6.25 m/s.
To find the speed of the passing waves, we need to determine the distance traveled by a wave crest in a given time interval.
Given:
Number of wave crests = 5
Time interval = 4 seconds
Distance between two consecutive wave crests = 5 meters
To find the distance traveled by a wave crest in 4 seconds, we can multiply the number of wave crests by the distance between them:
Distance traveled = Number of wave crests * Distance between crests
Distance traveled = 5 crests * 5 meters = 25 meters
Now, we can calculate the speed using the formula:
Speed = Distance / Time
Speed = 25 meters / 4 seconds
Speed = 6.25 meters per second
Therefore, the speed of the passing waves is 6.25 meters per second.
To know more about Speed, click here:
brainly.com/question/30462853
#SPJ11
Question 2 (1 point) An object's mass is a multiple of m and the distance to a particular point in space is a multiple of d. Which of the following points have the strongest gravitational field? a
The point closest to the object has the strongest gravitational field due to the inverse square relationship between distance and gravitational force.(d)
In terms of gravitational attraction, the strength of the field depends on the distance between the object and the point in question. According to Newton's law of universal gravitation, the gravitational force is inversely proportional to the square of the distance between two objects.
Therefore, the closer the point is to the object, the stronger the gravitational field will be. Since the object's distance to a particular point is a multiple of d, the point closest to the object (where the distance is the smallest multiple of d) will have the strongest gravitational field.
To learn more about gravitational field click here:
brainly.com/question/31829401
#SPJ11
" compete question"
An object's mass is a multiple of m and the distance to a particular point in space is a multiple of d. Which of the following points have the strongest gravitational field?
Point A: Mass = m, Distance = d
Point B: Mass = 2m, Distance = d
Point C: Mass = m, Distance = 2d
Point D: Mass = 2m, Distance = 2d
3- An incandescent lightbulb is controlled by a dimmer. What happens to the green color of the light given off by the bulb as the potential difference applied to the bulb decreases? A. The color becom
As the potential difference applied to the incandescent light-bulb decreases, the color of the light emitted shifts towards the red end of the spectrum.
The color of light emitted by an incandescent light-bulb is determined by the temperature of the filament inside the bulb. When the potential difference (voltage) applied to the bulb decreases, the filament temperature also decreases.
At higher temperatures, the filament emits light that appears more white or bluish-white. This corresponds to shorter wavelengths of light, including blue and green.
However, as the temperature of the filament decreases, the light emitted shifts towards longer wavelengths, such as yellow, orange, and eventually red. The green color, being closer to the blue end of the spectrum, becomes less prominent and eventually diminishes as the filament temperature decreases.
Therefore, as the potential difference applied to the bulb decreases, the green color of the light emitted by the bulb becomes less pronounced and eventually disappears, shifting towards the red end of the spectrum.
Read more about incandescent light-bulb here: https://brainly.com/question/935458
#SPJ11
A particle moving along the x axis has acceleration in the x direction as function of the time given by a(t)=3t2−t.
For t = 0 the initial velocity is 4.0 m/s. Determine the velocity when t = 1.0 s. Write here your answer. Include the units.
The velocity of a particle when t=1.0 is 4.5 m/s.
The velocity of a particle moving along the x axis with acceleration as The velocity of a particle a function of time given by a(t)=3t2−t and an initial velocity of 4.0 m/s at t=0, can be found by integrating the acceleration function with respect to time. The resulting velocity function is v(t)=t3−0.5t2+4.0t. Substituting t=1.0 s into the velocity function gives a velocity of 4.5 m/s.
To solve for the particle's velocity at t=1.0 s, we need to integrate the acceleration function with respect to time to obtain the velocity function. Integrating 3t2−t with respect to t gives the velocity function as v(t)=t3−0.5t2+C, where C is the constant of integration. Since the initial velocity is given as 4.0 m/s at t=0, we can solve for C by substituting t=0 and v(0)=4.0. This gives C=4.0.
We can now substitute t=1.0 s into the velocity function to find the particle's velocity at that time. v(1.0)=(1.0)3−0.5(1.0)2+4.0(1.0)=4.5 m/s.
Therefore, the velocity of the particle when t=1.0 s is 4.5 m/s.
To learn more about velocity click brainly.com/question/80295
#SPJ11
An ice crystal has ordinary- and extraordinary-ray refractive indices of no = 1.309 and ne = 1.313 respectively. i. Calculate the birefringence of the medium. ii. Calculate the thickness of sheet ice required for a quarter-wave plate, assuming it is illuminated by light of wavelength = 600 nm at normal incidence.
Birefringence is defined as the difference between the refractive indices of the extraordinary and ordinary rays in a birefringent material. Birefringence (Δn) = ne - no. The thickness of the sheet ice required for a quarter-wave plate, assuming it is illuminated by light with a wavelength of 600 nm at normal incidence, is approximately 393.3 nm.
Δn = 1.313 - 1.309
Δn = 0.004
Therefore, the birefringence of the ice crystal is 0.004.
ii. To calculate the thickness of the sheet ice required for a quarter-wave plate, we can use the formula:
Thickness = (λ / 4) * (no + ne)
where λ is the wavelength of light and no and ne are the refractive indices of the ordinary and extraordinary rays, respectively.
Plugging in the values:
Thickness = (600 nm / 4) * (1.309 + 1.313)
Thickness = 150 nm * 2.622
Thickness = 393.3 nm
Therefore, the thickness of the sheet ice required for a quarter-wave plate, assuming it is illuminated by light with a wavelength of 600 nm at normal incidence, is approximately 393.3 nm.
To learn more about, Birefringence, click here, https://brainly.com/question/31961152
#SPJ11
A block of ice (m = 20.0 kg) with an attached rope is at rest on a frictionless surface. You pull the block with a horizontal force of 93.0 N for 1:55 s. (a) Determine the magnitude of each force
the magnitude of the force is 93.0 N and the magnitude of the acceleration is 4.65 m/s².
The magnitude of the force and acceleration that results from pulling a block of ice with a rope can be calculated by using Newton's second law of motion.
mass of block, m = 20.0 kg
horizontal force, F = 93.0 N
time, t = 1.55 s
The acceleration of the block can be calculated by using the following formula:
a = F / ma = 93.0 / 20.0a = 4.65 m/s²
The magnitude of the force, F, can be calculated by using the following formula:
F = maF = 20.0 × 4.65F
= 93.0 N
Thus, the magnitude of the force is 93.0 N and the magnitude of the acceleration is 4.65 m/s².
learn more about force here
https://brainly.com/question/12785175
#SPJ11
A 24 cm -diameter circular loop of wire has a resistance of 120 12. It is initially in a 0.49 T magnetic field, with its plane perpendicular to B, but is removed from the field in 150 ms. Part A Calculate the electric energy dissipated in this process. Express your answer using two significant figures. IVO AEO ? E = J
The electric energy dissipated in the process is 131 J.
Given:
Diameter of the circular loop, d = 24 cm
Radius of the circular loop, r = 12 cm
Resistance of the circular loop, R = 120 ohm
Magnetic field, B = 0.49 T
Time, t = 150 ms = 0.15 sec
Part A: Calculate the electric energy dissipated in this process.
We know that the magnetic field creates an induced emf in the circular loop of wire. This induced emf causes a current to flow in the wire.The rate of change of magnetic flux, dφ/dt, induced emf, ε is given by Faraday's law of electromagnetic induction,
ε = -dφ/dt
The magnetic flux, φ, through the circular loop of wire is given by
φ = BAcosθ
where A is the area of the circular loop and θ is the angle between the magnetic field vector and the normal to the circular loop.
In this case, θ = 90° because the plane of the circular loop is perpendicular to the magnetic field vector.
Therefore, cosθ = 0.The flux is maximum when the loop is in the magnetic field and is given by
φ = BA
The emf induced in the circular loop of wire is given by
ε = -dφ/dtAs the circular loop is removed from the magnetic field, the magnetic flux through it decreases.
This means that the induced emf causes a current to flow in the wire in a direction such that the magnetic field produced by it opposes the decrease in the magnetic flux through it.
The magnitude of the induced emf is given by ε = dφ/dt
Therefore, the current, I flowing in the circular loop of wire is given by I = ε/R
where R is the resistance of the circular loop of wire.
The electric energy, E dissipated in the process is given by E = I²Rt
where t is the time taken to remove the circular loop of wire from the magnetic field.
Electric energy, E = I²Rt
= [(dφ/dt)/R]²Rt
= (dφ/dt)²Rt/R
= (dφ/dt)²R
= [(d/dt)(BA)]²R
= [(d/dt)(πr²B)]²R
= (πr²(dB/dt))²R
Substituting the given values,π = 3.14r = 12 cm, B = 0.49 T, Diameter of the circular loop, d = 24 cmR = 120 ohm. Time, t = 150 ms = 0.15 sec
We have to find the electric energy, E.Electric energy,
E = (πr²(dB/dt))²R
= (3.14 × 0.12² × [(0 - 0.49)/(0.15)])² × 120= 131 J
Therefore, the electric energy dissipated in the process is 131 J.
#SPJ11
Let us know more about electric energy : https://brainly.com/question/1580875.
A scuba diver is swimming 17. 0 m below the surface of a salt water sea, on a day when the atmospheric pressure is 29. 92 in HG. What is the gauge pressure, on the diver the situation? The salt water has a density of 1.03 g/cm³. Give your answer in atmospheres.
The gauge pressure on a scuba diver swimming at a depth of 17.0 m below the surface of a saltwater sea can be calculated using the given information.
To find the gauge pressure on the diver, we need to consider the pressure due to the depth of the water and subtract the atmospheric pressure.
Pressure due to depth: The pressure at a given depth in a fluid is given by the equation P = ρgh, where P is the pressure, ρ is the density of the fluid, g is the acceleration due to gravity, and h is the depth.
In this case, the depth is 17.0 m, and the density of saltwater is 1.03 g/cm³.
Conversion of units: Before substituting the values into the equation, we need to convert the density from g/cm³ to kg/m³ and the atmospheric pressure from in HG to atmospheres.
Density conversion: 1.03 g/cm³ = 1030 kg/m³Atmospheric pressure conversion: 1 in HG = 0.0334211 atmospheres (approx.)
Calculation: Now we can substitute the values into the equation to find the pressure due to depth.P = (1030 kg/m³) * (9.8 m/s²) * (17.0 m) = 177470.0 N/m²
Subtracting atmospheric pressure: To find the gauge pressure, we subtract the atmospheric pressure from the pressure due to depth.
Gauge pressure = Pressure due to depth - Atmospheric pressure
Gauge pressure = 177470.0 N/m² - (29.92 in HG * 0.0334211 atmospheres/in HG)
To learn more about gauge pressure click here.
brainly.com/question/30698101
#SPJ11
Physical Science
Based on the data given in the Periodic Table of Elements in your classroom, calculate the formula mass for H2SO4 (sulfuric acid).
Formula mass of sulfuric acid (H2SO4)The chemical formula for sulfuric acid is H2SO4. The formula mass is the sum of the masses of the atoms in the molecule.
To compute the formula mass of H2SO4, we must first determine the atomic mass of each atom in the compound and then add them together.
Atomic masses for H, S, and O are 1.008, 32.06, and 16.00, respectively.
Atomic mass of H2SO4 is equal to (2 x 1.008) + 32.06 + (4 x 16.00)
= 98.08 g/mol
Therefore, the formula mass of sulfuric acid (H2SO4) is 98.08 g/mol.
To know more about Formula mass visit:
https://brainly.com/question/28647347
#SPJ11
A pulsar is a rapidly rotating neutron star that emits radio pulses with precise synchronization, there being one such pulse for each rotation of the star. The period T of rotation is found by measuring the time between pulses. At present, the pulsar in the central region of the Crab nebula has a period of rotation of T = 0.13000000 s, and this is observed to be increasing at the rate of 0.00000741 s/y. What is the angular velocity of the star?
The angular velocity of the star is 48.5 rad/s.
A pulsar is a rapidly rotating neutron star that emits radio pulses with precise synchronization, there being one such pulse for each rotation of the star. The period T of rotation is found by measuring the time between pulses.
The observed period of rotation of the pulsar in the central region of the Crab nebula is T = 0.13000000 s, and this is increasing at a rate of 0.00000741 s/y.
The angular velocity of the star is given by:
ω=2πT−−√where ω is the angular velocity, and T is the period of rotation.
Substituting the values,ω=2π(0.13000000 s)−−√ω=4.887 radians per second.The angular velocity is increasing at a rate of:
dωdt=2πdtdT−−√
The derivative of T with respect to t is given by:
dTdt=0.00000741
s/y=0.00000023431 s/s
Substituting the values,dωdt=2π(0.00000023431 s/s)(0.13000000 s)−−√dωdt=0.000001205 rad/s2
The final angular velocity is:
ωfinal=ω+ΔωΔt
=4.887 rad/s+(0.000001205 rad/s2)(1 y)
ωfinal=4.888 rad/s≈48.5 rad/s.
Learn more about angular velocity from the given link
https://brainly.com/question/29342095
#SPJ11
The magnetic field around current carrying wire is blank proportional to the currant and blank proportional in the distance tot he wire
The magnetic field around a current-carrying wire is directly proportional to the current and inversely proportional to the distance from the wire.
The magnetic field strength generated by a current-carrying wire follows the right-hand rule. As the current increases, the magnetic field strength also increases. This relationship is described by Ampere's law.
Additionally, the magnetic field strength decreases as the distance from the wire increases, following an inverse square law. This means that doubling the current will double the magnetic field strength, while doubling the distance from the wire will reduce the field strength to one-fourth of its original value. Therefore, the magnetic field around a current-carrying wire is directly proportional to the current and inversely proportional to the distance from the wire.
To know more about magnetic field visit:
brainly.com/question/12691714
#SPJ
A bowling ball that has a radius of 11.0 cm and a mass of 7.50 kg rolls without slipping on a level lane at 4.00 rad/s. Calculate the ratio R of the translational kinetic energy to the rotational kinetic energy of the bowling ball.
The ratio R of the translational kinetic energy to the rotational kinetic energy of the bowling ball is approximately 0.836.
To calculate the ratio R of the translational kinetic energy to the rotational kinetic energy of the bowling ball, we need to determine the respective energies and compare them.
The translational kinetic energy of an object is given by the equation:
K_trans = (1/2) * m * v²
where m is the mass of the object and v is its linear velocity.
The rotational kinetic energy of a rotating object is given by the equation:
K_rot = (1/2) * I * ω²
where I is the moment of inertia of the object and ω is its angular velocity.
For a solid sphere like a bowling ball, the moment of inertia is given by:
I = (2/5) * m * r²
where r is the radius of the sphere.
Given the following values:
Radius of the bowling ball, r = 11.0 cm = 0.11 m
Mass of the bowling ball, m = 7.50 kg
Angular velocity of the bowling ball, ω = 4.00 rad/s
Let's calculate the translational kinetic energy, K_trans:
K_trans = (1/2) * m * v²
Since the ball is rolling without slipping, the linear velocity v is related to the angular velocity ω and the radius r by the equation:
v = r * ω
Substituting the given values:
v = (0.11 m) * (4.00 rad/s) = 0.44 m/s
K_trans = (1/2) * (7.50 kg) * (0.44 m/s)²
K_trans ≈ 0.726 J (rounded to three decimal places)
Next, let's calculate the rotational kinetic energy, K_rot:
I = (2/5) * m * r²
I = (2/5) * (7.50 kg) * (0.11 m)²
I ≈ 0.10875 kg·m² (rounded to five decimal places)
K_rot = (1/2) * (0.10875 kg·m²) * (4.00 rad/s)²
K_rot ≈ 0.870 J (rounded to three decimal places)
Now, we can calculate the ratio R:
R = K_trans / K_rot
R = 0.726 J / 0.870 J
R ≈ 0.836
Therefore, the ratio R of the translational kinetic energy to the rotational kinetic energy of the bowling ball is approximately 0.836.
To learn more about kinetic energy click here:
brainly.com/question/31137781
#SPJ11
A violin string vibrates at 250 Hz when unfingered. At what freguency will it vibrate if it is fingered one third of the way down from the end? Tries 1/10 Rrevious Tries
The frequency at which the fingered violin string will vibrate is approximately 375 Hz.
When a violin string is fingered at a specific position, the length of the vibrating portion of the string changes, which in turn affects the frequency of vibration. In this case, the string is fingered one third of the way down from the end.
When a string is unfingered, it vibrates as a whole, producing a certain frequency. However, when the string is fingered, the effective length of the string decreases. The shorter length results in a higher frequency of vibration.
To determine the frequency of the fingered string, we can use the relationship between frequency and the length of a vibrating string. The frequency is inversely proportional to the length of the string.
If the string is fingered one third of the way down, the effective length of the string becomes two-thirds of the original length. Since the frequency is inversely proportional to the length, the frequency will be three-halves of the original frequency.
Mathematically, if the unfingered frequency is 250 Hz, the fingered frequency can be calculated as follows:
fingered frequency = (3/2) * unfingered frequency
= (3/2) * 250 Hz
= 375 Hz.
Learn more about frequency
brainly.com/question/29739263
#SPJ11
An unknown substance has an emission spectrum with lines corresponds to the following wavelengths 1.69 x 10-7 m, 1.87 x 10-7 m and (2.90x10^-7) m. The wavelength of light that will be released when an electron transitions from the second state to the first state is a.bc x 10d m.
You have mentioned that an unknown substance has an emission spectrum with lines corresponds to the following wavelengths 1.69 x 10-7 m, 1.87 x 10-7 m and (2.90x10^-7) m, we can use these values to calculate the value of a.bc x 10d m.
The wavelength of light that will be released when an electron transitions from the second state to the first state is given by the Rydberg formula: 1/λ = RZ^2(1/n1^2 - 1/n2^2), where λ is the wavelength of the emitted light, R is the Rydberg constant, Z is the atomic number of the element, n1 and n2 are the principal quantum numbers of the two energy levels involved in the transition.
learn more about substance
https://brainly.com/question/13320535
#SPJ11
2. Now you try one. Suppose that charge 1 has a magnitude of +6.00μC, charge 2 of +5.00μC, and charge 1 is located at 4.00cm i +3.00cm ĵ and charge 2 is located at 6.00cm î-8.00cm j. Find F12 and
Given information Magnitude of charge 1 = +6.00μCMagnitude of charge 2 = +5.00μCLocation of charge 1 = 4.00cm i +3.00cm j Location of charge 2 = 6.00cm i -8.00cm j Find the force between charge 1 and charge 2.
Force between the two charges is given byF12 = (kq1q2) / r^2Where k is the Coulomb’s constant and is given byk = 9 x 10^9 Nm^2/C^2q1 and q2 are the magnitudes of the charges and r is the distance between the two charges.F12 = (9 x 10^9 Nm^2/C^2) (6.00μC) (5.00μC) / r^2First, find the distance between the two charges.
We know that charge 1 is located at 4.00cm i + 3.00cm j and charge 2 is located at 6.00cm i - 8.00cm j. Distance between the two charges is given byr = √((x₂-x₁)² + (y₂-y₁)²)r = √((6.00 - 4.00)² + (-8.00 - 3.00)²)r = √(2.00² + 11.00²)r = √125r = 11.18cmPutting the value of r in the formula of F12, we haveF12 = (9 x 10^9 Nm^2/C^2) (6.00μC) (5.00μC) / (11.18cm)²F12 = 17.3 x 10^5 NThe force between the two charges is 17.3 x 10^5 N.Answer:F12 = 17.3 x 10^5 N.
To know more about Magnitude visit:
https://brainly.com/question/31022175
#SPJ11
A transverse sinusoidal wave on a wire is moving in the -x-direction. Its speed is 30.0 m/s, and its period is 16.0 ms. Att 0, a colored mark on the wire atxo has a vertical position of 2.00 cm and is moving down with a speed of 1.20 m/s. (a) What is the amplitude of the wave (in m)? m (b) What is the phase constant (in rad) rad (c) What is the maximum transverse speed of the wire (in m/s)? m/s (d) Write the wave function for the wave (Use the form A sin(kx+of+ p). Assume that y and are in m and is ins. Do not include units in your answer) y(x, t) - m
A transverse sinusoidal wave on a wire is moving in the -x-direction. Its speed is 30.0 m/s, and its period is 16.0 ms. At 0, a coloured mark on the wire at [tex]x_o[/tex] has a vertical position of 2.00 cm and is moving down with a speed of 1.20 m/s.
(a) The amplitude of the wave is 0.02 m.
(b) The phase constant is π radians.
(c) The maximum transverse speed of the wire is 30.0 m/s.
(d) The wave function for the wave is y(x, t) = 0.02 sin(13.09x + 392.7t + π).
(a) To determine the amplitude (A) of the wave, we need to find the maximum displacement of the coloured mark on the wire. The vertical position of the mark at t = 0 is given as 2.00 cm, which can be converted to meters:
2.00 cm = 0.02 m
Since the wave is sinusoidal, the maximum displacement is equal to the amplitude, so the amplitude of the wave is 0.02 m.
(b) The phase constant (Φ) represents the initial phase of the wave. We know that at t = 0, the mark at x = [tex]x_o[/tex] is moving down with a speed of 1.20 m/s. This indicates that the wave is in its downward motion at t = 0. Therefore, the phase constant is π radians (180 degrees) because the sinusoidal function starts at its maximum downward position.
(c) The maximum transverse speed of the wire corresponds to the maximum velocity of the wave. The velocity of a wave is given by the product of its frequency (f) and wavelength (λ):
v = f λ
We can find the frequency by taking the reciprocal of the period:
f = 1 / T = 1 / (16.0 × 10⁻³ s) = 62.5 Hz
The velocity (v) of the wave is given as 30.0 m/s. Rearranging the equation v = f λ, we can solve for the wavelength:
λ = v / f = (30.0 m/s) / (62.5 Hz) = 0.48 m
The maximum transverse speed of the wire is equal to the velocity of the wave, so it is 30.0 m/s.
(d) The wave function for the wave can be written as:
y(x, t) = A sin( kx + ωt + Φ)
where A is the amplitude, k is the wave number, ω is the angular frequency, and Φ is the phase constant.
We have already determined the amplitude (A) as 0.02 m and the phase constant (Φ) as π radians.
The wave number (k) can be calculated using the equation:
k = 2π / λ
Substituting the given wavelength (λ = 0.48 m), we find:
k = 2π / 0.48 = 13.09 rad/m
The angular frequency (ω) can be calculated using the equation:
ω = 2πf
Substituting the given frequency (f = 62.5 Hz), we find:
ω = 2π × 62.5 ≈ 392.7 rad/s
Therefore, the wave function for the wave is:
y(x, t) = 0.02 sin(13.09x + 392.7t + π)
To know more about wave function here
https://brainly.com/question/32239960
#SPJ4
A bus of mass M1 is going along a main road when suddenly at an intersection a car of mass m2 (M1>>>m2) crosses it perpendicularly, the bus brakes 5m before the impact, however it crashes and takes the 55m car. Determine:
- The speed of the bus before starting to brake (Leave it expressed in the terms that are necessary)
To determine the speed of the bus before it started braking, we can use the principle of conservation of momentum. By considering the momentum of the car after the collision and the distance over which the bus brakes, we can calculate the initial speed of the bus.
The principle of conservation of momentum states that the total momentum of a system remains constant if no external forces act on it. Before the collision, the car and the bus are separate systems, so we can apply this principle to them individually.
Let's denote the initial speed of the bus as V1 and the final speed of the car and bus together as V2. The momentum of the car after the collision is given by m2 * V2, and the momentum of the bus before braking is given by M1 * V1.
During the collision, the bus and car are in contact for a certain amount of time, during which a force acts on both of them, causing them to decelerate. Since the bus brakes for 5m and takes 55m to stop completely, the deceleration is the same for both the bus and the car.
Using the equations of motion, we can relate the initial speed, final speed, and distance traveled during deceleration. We know that the final speed of the car and bus together is 0, and the distance over which the bus decelerates is 55m. By applying these conditions, we can solve for V2.
Now, using the principle of conservation of momentum, we equate the momentum of the car after the collision to the momentum of the bus before braking: m2 * V2 = M1 * V1. Rearranging the equation, we find that V1 = (m2 * V2) / M1.
With the value of V2 determined from the distance traveled during deceleration, we can substitute it back into the equation to find the initial speed of the bus, V1.
Learn more about distance here ;
brainly.com/question/29769926
#SPJ11
1. (10 pts) Consider an isothermal semi-batch reactor with one feed stream and no product stream. Feed enters the reactor at a volumetric flow rate q(t) and molar concentration C (t) of reactant A. The reaction scheme is A à 2B, and the molar reaction rate of A per unit volume is r = KC12, where k is the rate constant. Assume the feed does not contain component B, and the density of the feed and reactor contents are the same. a. Develop a dynamic model of the process that could be used to calculate the volume (V) and the concentrations of A and B (C and C) in the reactor at any time. b. Perform a degrees of freedom analysis and identify the input and output variables clearly.
The dynamic model involves using mass balance and reaction kinetics principles to calculate the reactor volume (V) and the concentrations of reactant A (C) and product B (C) at any given time.
What is the dynamic model for the isothermal semi-batch reactor described in the paragraph?The given paragraph describes an isothermal semi-batch reactor system with one feed stream and no product stream. The reactor receives a feed with a volumetric flow rate, q(t), and a molar concentration of reactant A, C(t). The reaction occurring in the reactor is A → 2B, with a molar reaction rate, r, given by the expression r = KC12, where K represents the rate constant. It is assumed that the feed does not contain component B, and the density of the feed and reactor contents are equivalent.
a. To develop a dynamic model of the process, one can utilize the principles of mass balance and reaction kinetics. By applying the law of conservation of mass, a set of differential equations can be derived to calculate the volume (V) of the reactor and the concentrations of A (C) and B (C) at any given time.
b. Performing a degrees of freedom analysis involves identifying the number of variables and equations in the system to determine the degree of freedom or the number of independent variables that can be manipulated. In this case, the input variable is the feed volumetric flow rate, q(t), while the output variables are the reactor volume (V) and the concentrations of A (C) and B (C).
Learn more about dynamic model
brainly.com/question/31580718
#SPJ11
In a fruit exporting company, a cold blow is given to The fruit by placing them on a flat tray on which air flows at -20°C And at a speed of 1 m/s. For a 10 m long tray, A) Calculate the time it takes for a cranberry to reach a temperature of 10°C, considering that the fruits are received at Tamb= 20°C. Consider a Diameter of 12 mm. B) Can the same calculation be made for a strawberry (30 mm in diameter)? And an apple (80 mm in diameter)? Prove your answer, and if you are Yes, calculate that time. C) Will there be differences in the cooling times of blueberries? In If so, calculate the maximum and minimum temperatures expected For the blueberries on the tray, considering the time of residence In point (a). Help: Consider fruit as spheres. When they are in the tray, they They only exchange heat with the air flow through the surface exposed to it. Airflow (i.e. by half of its surface). Due to the superficial roughness of the tray, turbulent conditions are reached quickly, so Recommends using the following correlations for the Nusselt number: Nuz=0,037 Re 4/5,1/3 Nu, = 0,0296 Re/Pr¹/3 Thermophysic properties of the fruit k (W/mK) p (kg/m³) 0,310 1,1 640 800 0,418 840 Arándano Frutilla Manzana at aruta. Cp (kJ/kgK) 3,83 4,00 3,81
A) The time it takes for a cranberry to reach a temperature of 10°C on the flat tray with an airflow of -20°C and 1 m/s is approximately X minutes.
B) The same calculation cannot be directly applied to a strawberry (30 mm in diameter) or an apple (80 mm in diameter) due to differences in their sizes and thermal properties.
C) There will be differences in the cooling times of blueberries due to their size and thermal properties.
The time it takes for a cranberry to reach a temperature of 10°C on the flat tray with an air flow at -20°C and 1 m/s speed can be calculated using heat transfer principles. By considering the diameter of the cranberry and the properties of the fruit, we can determine the cooling time. However, the same calculation cannot be directly applied to a strawberry and an apple due to their different diameters. To determine the cooling time for these fruits, additional calculations are necessary. Additionally, there may be differences in the cooling times of blueberries due to their varying sizes.
To provide a more detailed explanation, we need to consider the heat transfer process occurring between the fruit and the cold airflow on the tray. As the fruit is placed on the tray, heat is transferred from the fruit to the surrounding air due to the temperature difference. The rate of heat transfer depends on several factors, including the surface area of the fruit in contact with the air, the temperature difference, and the properties of the fruit.
In the case of the cranberry, we can approximate it as a sphere with a diameter of 12 mm. Using the provided properties of the fruit, we can calculate the Nusselt number using the given correlations. This, in turn, allows us to determine the convective heat transfer coefficient. By applying the principles of heat transfer, we can establish the rate of heat transfer from the cranberry to the airflow and subsequently calculate the time it takes for the cranberry to reach a temperature of 10°C.
However, this calculation cannot be directly applied to the strawberry and apple, as they have different diameters. To determine the cooling time for these fruits, we need to repeat the calculation process by considering their respective diameters.
Regarding the cooling times of blueberries, there may be differences due to their varying sizes. The time of residence on the tray, as calculated in the first step, can provide insights into the maximum and minimum temperatures expected for the blueberries. By considering the time of residence and the properties of the blueberries, we can determine the rate of heat transfer and calculate the expected temperature range.
Learn more about temperature
brainly.com/question/12035620
#SPJ11
Find work which is required to bring three charges of Q=6.5
microC each from infinity and place them into the corners of a
triangle of side d=3.5 cm. Give answer in J.
The work required to bring the three charges from infinity and place them into the corners of the triangle is approximately 3.45 x 10^-12 J.
To find the work required to bring three charges from infinity and place them into the corners of a triangle, we need to consider the electric potential energy.
The electric potential energy (U) of a system of charges is given by:
U = k * (q1 * q2) / r
where k is the Coulomb's constant (k ≈ 8.99 x 10^9 N m²/C²), q1 and q2 are the charges, and r is the distance between the charges.
In this case, we have three charges of Q = 6.5 μC each and a triangle with side d = 3.5 cm. Let's label the charges as Q1, Q2, and Q3.
The work required to bring the charges from infinity and place them into the corners of the triangle is equal to the change in electric potential energy:
Work = ΔU = U_final - U_initial
Initially, when the charges are at infinity, the potential energy is zero since there is no interaction between them.
U_initial = 0
To calculate the final potential energy, we need to find the distances between the charges. In an equilateral triangle, all sides are equal, so the distance between any two charges is d.
U_final = k * [(Q1 * Q2) / d + (Q1 * Q3) / d + (Q2 * Q3) / d]
U_final = k * (Q1 * Q2 + Q1 * Q3 + Q2 * Q3) / d
Substituting the given values:
U_final = (8.99 x 10^9 N m²/C²) * (6.5 μC * 6.5 μC + 6.5 μC * 6.5 μC + 6.5 μC * 6.5 μC) / (3.5 cm)
Convert the charge to coulombs:
U_final = (8.99 x 10^9 N m²/C²) * (6.5 x 10^-6 C * 6.5 x 10^-6 C + 6.5 x 10^-6 C * 6.5 x 10^-6 C + 6.5 x 10^-6 C * 6.5 x 10^-6 C) / (3.5 x 10^-2 m)
Calculating the final potential energy:
U_final ≈ 3.45 x 10^-12 J
The work required is the change in potential energy:
Work = ΔU = U_final - U_initial = 3.45 x 10^-12 J - 0 J = 3.45 x 10^-12 J
The work required to bring the three charges from infinity and place them into the corners of the triangle is approximately 3.45 x 10^-12 J.
To know more about three charges click this link -
brainly.com/question/30840654
#SPJ11
A mug with mass 200 g at temperature 25 °C is filled with coffee with 250g at temperature
80 °C. Given that the specific heat of coffee is 4.2 J g-1K-1, and mug is 1.0 ] g-1K-1.
Assume that no heat is loss to the environment. Calculate
(1) the equilibrium temperature of the coffee. (in) the heat absorbed by the mug when it reached the equilibrium
temperature.
(b) The molar specific heat can be temperature dependent at very low temperatures. A matter
X has it specific heat
A mug with a mass of 200 g and specific heat of 1.0 J g-1K-1 is filled with 250 g of coffee at a temperature of 80 °C with a specific heat of 4.2 J g-1K-1. We need to find the equilibrium temperature of coffee and heat absorbed by the mug when equilibrium temperature is reached.
(i)The equilibrium temperature of the coffee can be found by using the formula:
Heat lost by coffee = Heat gained by mug
So, (250 g) (4.2 J g-1K-1) (80°C - x) = (200 g) (1.0 J g-1K-1) (x - 25°C)
Solving this equation, we get x = 45.5°C. Therefore, the equilibrium temperature of the coffee is 45.5°C.
The heat absorbed by the mug when it reached the equilibrium temperature can be calculated using the formula:
q = mCΔT
where q is the heat absorbed, m is the mass of the mug, C is its specific heat, and ΔT is the change in temperature.
So, q = (200 g) (1.0 J g-1K-1) (45.5°C - 25°C)
q = 400 J
Hence, the heat absorbed by the mug when it reached the equilibrium temperature is 400 J.
(ii)The given problem involves the concept of thermal equilibrium- the state in which the temperature of the system remains constant, and heat flows between the systems until their temperatures are the same. In this problem, we have to find the equilibrium temperature of the coffee when it is mixed with the mug and the heat absorbed by the mug to reach the equilibrium temperature.
We first use the formula for heat loss and gain to find the equilibrium temperature of the coffee. Since there is no heat transfer to the environment, the heat lost by coffee should be equal to the heat gained by the mug.
We use the mass, specific heat, and temperature values of both coffee and mug to calculate the equilibrium temperature.
We then use the concept of specific heat to calculate the heat absorbed by the mug. The specific heat of a substance is a measure of its ability to absorb heat.
The mug's specific heat is lower than that of coffee, indicating that it absorbs less heat for a given change in temperature. We use the mass, specific heat, and temperature change values of the mug to calculate the heat absorbed by it.
Learn more about Equilibrium from the given link:
https://brainly.com/question/30694482
#SPJ11
Description of what physical processes needs to use
fractional calculation?
Answer:
Fractional calculus is a branch of mathematics that deals with the calculus of functions that are not differentiable at all points. This can be useful for modeling physical processes that involve memory or dissipation, such as viscoelasticity, diffusion, and wave propagation.
Explanation:
Some physical processes that need to use fractional calculation include:
Viscoelasticity: Viscoelasticity is a property of materials that exhibit both viscous and elastic behavior. This can be modeled using fractional calculus, as the fractional derivative of a viscoelastic material can be used to represent the viscous behavior, and the fractional integral can be used to represent the elastic behavior.
Diffusion: Diffusion is the movement of molecules from a region of high concentration to a region of low concentration. This can be modeled using fractional calculus, as the fractional derivative of a diffusing substance can be used to represent the rate of diffusion.
Wave propagation: Wave propagation is the movement of waves through a medium. This can be modeled using fractional calculus, as the fractional derivative of a wave can be used to represent the attenuation of the wave.
Fractional calculus is a powerful tool that can be used to model a wide variety of physical processes. It is a relatively new field of mathematics, but it has already found applications in many areas, including engineering, physics, and chemistry.
Learn more about Fractional calculus.
https://brainly.com/question/33261308
#SPJ11
An athlete runs at a velocity of 18ms due east. A
strong wind traveling at 8ms blows on bearing 230⁰.
Find the resultant velocity using triangle of vector.
The resultant velocity of the athlete is 19.7m/s at a bearing of 24.9⁰.
Step 1: Draw the vector diagram
The first step is to draw a vector diagram that depicts the athlete's velocity (18m/s due east) and the wind's velocity (8m/s at a bearing of 230⁰).
Step 2: Draw the resultant vector
Now, we draw the resultant vector from the tail of the first vector to the head of the second vector.
This gives us the resultant velocity of the athlete after being impacted by the wind.
Step 3: Calculate the magnitude and direction of the resultant vector
Using the triangle of vectors, we can calculate the magnitude and direction of the resultant vector.
The magnitude is the length of the vector, while the direction is the angle between the vector and the horizontal axis.
We can use trigonometry to calculate these values.
In this case, we have a right triangle, so we can use the Pythagorean theorem to calculate the magnitude of the resultant vector: [tex]R^{2} = (18m/s)^{2} + (8m/s)^{2} R^{2} = 324 + 64R^{2} = 388R = \sqrt{388R} = 19.7m/s[/tex]
To calculate the direction of the resultant vector, we can use the inverse tangent function: Tanθ = Opposite/AdjacentTanθ = 8/18Tanθ = 0.444θ = tan⁻¹(0.444)θ = 24.9⁰
Therefore, the resultant velocity of the athlete is 19.7m/s at a bearing of 24.9⁰.
For more questions on velocity
https://brainly.com/question/29396365
#SPJ8
4. a. An electron in a hydrogen atom falls from an initial energy level of n = 5 to a final level of n = 2. Find the energy, frequency, and wavelength of the photon that will be emitted for this sequence. [ For hydrogen: E--13.6 eV/n?] b. A photon of energy 3.10 eV is absorbed by a hydrogen atom, causing its electron to be released with a kinetic energy of 225 eV. In what energy level was the electron? c. Find the wavelength of the matter wave associated with an electron moving at a speed of 950 m/s
The energy of the emitted photon is 10.2 eV, its frequency is 3.88 × 10^15 Hz, and its wavelength is 77.2 nm. The electron was in the energy level of n = 3. The wavelength is approximately 0.167 nm.
a. To find the energy, frequency, and wavelength of the photon emitted when an electron falls from n = 5 to n = 2 in a hydrogen atom, we can use the formula for the energy levels of hydrogen: E = -13.6 eV/n^2.
The initial energy level is n = 5, so the initial energy is E1 = -13.6 eV/5^2 = -0.544 eV. The final energy level is n = 2, so the final energy is E2 = -13.6 eV/2^2 = -3.4 eV.
The energy of the emitted photon is the difference between the initial and final energies: ΔE = E2 - E1 = -3.4 eV - (-0.544 eV) = -2.856 eV.
To convert the energy to joules, we multiply by the conversion factor 1.602 × 10^-19 J/eV, giving ΔE = -2.856 eV × 1.602 × 10^-19 J/eV = -4.578 × 10^-19 J.
The frequency of the photon can be found using the equation E = hf, where h is Planck's constant (6.626 × 10^-34 J·s). Rearranging the equation, we have f = E/h, so the frequency is f = (-4.578 × 10^-19 J) / (6.626 × 10^-34 J·s) = -6.91 × 10^14 Hz.
To find the wavelength of the photon, we can use the equation c = λf, where c is the speed of light (3 × 10^8 m/s). Rearranging the equation, we have λ = c/f, so the wavelength is λ = (3 × 10^8 m/s) / (-6.91 × 10^14 Hz) = -4.34 × 10^-7 m = -434 nm. Since wavelength cannot be negative, we take the absolute value: λ = 434 nm.
b. If a photon of energy 3.10 eV is absorbed by a hydrogen atom and the released electron has a kinetic energy of 225 eV, we can find the initial energy level of the electron using the equation E = -13.6 eV/n^2.
The initial energy level can be found by subtracting the kinetic energy of the electron from the energy of the absorbed photon: E1 = 3.10 eV - 225 eV = -221.9 eV.
To find the value of n, we solve the equation -13.6 eV/n^2 = -221.9 eV. Rearranging the equation, we have n^2 = (-13.6 eV) / (-221.9 eV), n^2 = 0.06128, and taking the square root, we get n ≈ 0.247. Since n must be a positive integer, the energy level of the electron was approximately n = 1.
c. The de Broglie wavelength of an electron can be calculated using the equation λ = h / (mv), where h is Planck's constant (6.626 × 10^-34 J·s), m is the mass of the electron (9.10938356 × 10^-31 kg), and v is the velocity of the electron (950 m/s).
Substituting the values into the equation, we have λ = (6.626 × 10^-34 J·s) / ((9.10938356 × 10^-31 kg) × (950 m/s)) = 7.297 × 10^-10 m = 0.7297 nm.
To learn more about photon click here:
brainly.com/question/33017722
#SPJ11
A bat hits a baseball with an average force of 20 N for a contact time of 0.3 seconds, the impulse of this collision is
The given values in the problem are force (F) and time (t) of collision.
Impulse (J) can be calculated by using the formula:
J = F × t
Impulse is the product of force and time. The given force is 20 N and contact time is 0.3 seconds.
Impulse J = 20 N × 0.3 s= 6 N-s
Therefore, the impulse of the collision between the bat and baseball is 6 N-s.
In this problem, we are given that the bat hits a baseball with an average force of 20 N for a contact time of 0.3 seconds.
The impulse of this collision can be determined by using the formula
J = F × t, where
J is the impulse,
F is the force and
t is the time of collision.
Impulse is a vector quantity and is measured in Newton-second (N-s).
In this problem, the force is given as 20 N and the contact time is 0.3 seconds.
Using the formula J = F × t, we can calculate the impulse of this collision as:
J = 20 N × 0.3 s
J= 6 N-s
Therefore, the impulse of the collision between the bat and baseball is 6 N-s.
Learn more about impulse here
https://brainly.com/question/30395939
#SPJ11
A hollow cylinder with an inner radius of 4.0 mm and an outer radius of 24 mm conducts a 5.0-A current flowing parallel to the axis of the cylinder. If the current density is uniform throughout the wire, what is the magnitude of the magnetic field at a point 16 mm from its center ?
The magnitude of the magnetic field at a point 16 mm from the center of the hollow cylinder is 0.0625 T.
To calculate the magnitude of the magnetic field at a point 16 mm from the center of the hollow cylinder, we can use Ampere's law.
Ampere's law states that the magnetic field around a closed loop is directly proportional to the current passing through the loop.
The formula for the magnetic field produced by a current-carrying wire is:
B = (μ₀ * I) / (2π * r)
where B is the magnetic field, μ₀ is the permeability of free space (4π × 10^-7 T·m/A), I is the current, and r is the distance from the center of the wire.
In this case, the current I is 5.0 A, and the distance r is 16 mm, which is equivalent to 0.016 m.
Plugging the values into the formula, we have:
B = (4π × 10^-7 T·m/A * 5.0 A) / (2π * 0.016 m)
B = (2 × 10^-6 T·m) / (0.032 m)
B = 0.0625 T
To learn more about Ampere's law: https://brainly.com/question/32676356
#SPJ11
A certain simple pendulum has a period on an unknown planet of 4.0 s. The gravitational acceleration of the planet is 4.5 m/s². What would the period be on the surface of the Earth? (9Earth = 9.80 m/s2) 2.71 s 8.71 s 1.84 s You need to know the length of the pendulum to answer. 5.90 s
The period of the pendulum on the surface of the Earth would be approximately 2.71 seconds.
To determine the period of the pendulum on the surface of the Earth, we need to consider the relationship between the period (T), the length of the pendulum (L), and the gravitational acceleration (g).
The formula for the period of a simple pendulum is given by:
T = 2π * √(L/g)
Where T is the period, L is the length of the pendulum, and g is the gravitational acceleration.
In this scenario, we are given the period on the unknown planet (4.0 s) and the gravitational acceleration on that planet (4.5 m/s²).
We can rearrange the formula to solve for L:
L = (T^2 * g) / (4π^2)
Plugging in the given values, we have:
L = (4.0^2 * 4.5) / (4π^2) ≈ 8.038 meters
Now, using the length of the pendulum, we can calculate the period on the surface of the Earth. Given the gravitational acceleration on Earth (9.80 m/s²), we use the same formula:
T = 2π * √(L/g)
T = 2π * √(8.038/9.80) ≈ 2.71 seconds
Therefore, the period of the pendulum on the surface of the Earth would be approximately 2.71 seconds.
To learn more about pendulum refer here:
https://brainly.com/question/29268528
#SPJ11
A physics student notices that the current in a coil of conducting wire goes from in 0.200 A to 12 = 1.50 A in a time interval of At = 0.250 s. Assuming the coil's inductance is L = 3.00 mt, what is the magnitude of the average induced emf (in mV) in the coil for this time interval?
Explanation:
We can use Faraday's law of electromagnetic induction to find the average induced emf in the coil. According to this law, the induced emf (ε) in a coil is equal to the negative of the rate of change of magnetic flux through the coil:
ε = - dΦ/dt
where Φ is the magnetic flux through the coil.
The magnetic flux through a coil of inductance L is given by:
Φ = LI
where I is the current in the coil.
Differentiating both sides of this equation with respect to time, we get:
dΦ/dt = L(dI/dt)
Substituting the given values, we get:
dI/dt = (1.50 A - 0.200 A) / 0.250 s = 4.40 A/s
L = 3.00 mH = 0.00300 H
Therefore, the induced emf in the coil is:
ε = - L(dI/dt) = - (0.00300 H)(4.40 A/s) = -0.0132 V
Since the question asks for the magnitude of the induced emf, we take the absolute value of the answer and convert it from volts to millivolts:
|ε| = 0.0132 V = 13.2 mV
Therefore, the magnitude of the average induced emf in the coil for the given time interval is 13.2 mV.