The expression for finding the charge on the capacitors when they are connected in series with a battery is Q = CV, where Q is the charge, C is the capacitance, and V is the voltage applied.
Let's find out the equivalent capacitance of the circuit first. The total capacitance of the circuit is found by the formula C_eq
= (C1 * C2)/(C1 + C2)
On substituting the given values, we get:
C_eq = (5*8)/(5+8)
= 40/13 uF
≈ 3.08 uF
The voltage across each capacitor is the same, which is equal to the battery voltage, i.e., V = 2VThe charge on each capacitor can be calculated by using the Q = CV equation.
Let's calculate the charge on C1,Q1
= C1V = 5*10^-12 * 2
= 10 * 10^-12 C = 10 pC
≈ 10.3 uc
Therefore, the correct answer is option d. 12.3 uc
To know more about capacitors visit:
https://brainly.com/question/31627158
#SPJ11
In the circuit of Figure, the equivalent capacitance is C₂ = 1.00 μF- O 5.0 μF O 1.20 μF O 0.8 μF O 2.67 µF C₁ = 2.00 μF C₁ = 2.00 uF
The equivalent capacitance in the circuit of Figure is 2.67 μF.
In the given circuit, we have two capacitors, C₁ and C₂, connected in parallel. When capacitors are connected in parallel, the total capacitance is the sum of the individual capacitances.
Given:
C₁ = 2.00 μF
C₂ = 1.00 μF
Since the two capacitors are in parallel, we can simply add their capacitances to find the equivalent capacitance:
C_eq = C₁ + C₂
= 2.00 μF + 1.00 μF
= 3.00 μF
Therefore, the equivalent capacitance in the circuit is 3.00 μF.
However, the options provided in the question do not include 3.00 μF as one of the choices. The closest value to 3.00 μF among the given options is 2.67 μF. So, the equivalent capacitance in the circuit is approximately 2.67 μF based on the given choices.
To learn more about equivalent capacitance, here
https://brainly.com/question/30556846
#SPJ4
In the circuit given in the figure, the equivalent capacitance is C₂ = 1.00 µF.
The given circuit can be solved by following Kirchhoff's rules, that is, junction rule and loop rule.Using Kirchhoff's junction rule, we haveI1 = I2 + I3 ----(1)As there is only one loop in the circuit, we can use Kirchhoff's loop rule to obtain the equivalent capacitance of the circuit.Kirchhoff's loop rule states that the algebraic sum of potential differences in a closed loop is zero.Therefore, the loop equation becomes V1 - V2 - V3 = 0or (1/C1)q + (1/C2)q - (1/C3)q = 0or q(1/C1 + 1/C2 - 1/C3) = 0or (1/C1 + 1/C2 - 1/C3) = 0or C3 = (C1 × C2)/(C1 + C2) = 2 × 1/3 = 2/3 µFTherefore, the equivalent capacitance of the circuit is 1 + 2/3 = 5/3 µF.A capacitor is a device used to store electric charge. The capacitance of a capacitor is the amount of charge that it can store per unit of voltage. The unit of capacitance is the farad. The capacitance of a capacitor depends on the geometry of the plates, the separation between them, and the material used.
Learn more about capacitance
https://brainly.com/question/31871398
#SPJ11
2. A car with mass 1,200 kg takes a turn on a road with radius radius 28 m a. If the car takes the turn at a speed of 9 m/s. What was the value of static friction on the car? b. If = 0.72 what is the maximum speed which it can take the turn without slipping?
The maximum speed which it can take the turn without slipping is given by: vmax = √μrgwhere μ is the coefficient of static friction, r is the radius of the turn, and g is the acceleration due to gravity.vmax = √μrg= √(0.72)(9.81 m/s²)(28 m)= √1799.76= 42.44 m/s The maximum speed which it can take the turn without slipping is 42.44 m/s.
Given that the mass of the car, m
= 1200 kg, the radius of the turn, r
= 28 m, and the speed of the car, v
= 9 m/s. The force acting on the car towards the center of the turn is the force of friction, Ff. The formula for the force of friction acting on a car is given by: Ff
= μFn where μ is the coefficient of static friction and Fn is the normal force acting on the car. At the maximum speed of 9 m/s, the force of friction acting on the car is just enough to provide the centripetal force required to keep the car moving in a circular path. Hence, the centripetal force, Fc can be equated to the force of friction, Ff. The formula for centripetal force is given by: Fc
= mv²/r Where m is the mass of the car, v is the speed of the car, and r is the radius of the turn.Fc
= mv²/r
= (1200 kg)(9 m/s)²/28 m
= 3315.79 N
The force of friction, Ff
= Fc
= 3315.79 N.
The value of static friction on the car is 3315.79 N.b) We know that the maximum speed, vmax can be calculated by equating the centripetal force required to the force of friction available. That is, Fc
= Ff
= μFn.
The maximum speed which it can take the turn without slipping is given by: vmax
= √μrg
where μ is the coefficient of static friction, r is the radius of the turn, and g is the acceleration due to gravity.vmax
= √μrg
= √(0.72)(9.81 m/s²)(28 m)
= √1799.76
= 42.44 m/s
The maximum speed which it can take the turn without slipping is 42.44 m/s.
To know more about gravity visit:
https://brainly.com/question/31321801
#SPJ11
A long staight wire carried by a current of 5.9 A is placed in a magnetic field and the magnitude of magnetic force is 0.031 N. The magnetic field and the length of the wire are remained unchanged. The magnetic force acting on the wire is changed to 0.019 N while the current is changed to a different value. What is the value of this changed current? (Give your answer in amps but don't include the units.) A 15-turn circular loop of wire is placed into a magnetic field with initial magnitude 4.1 T. The magnetic field is perpendicular to the surface of the loop. Over a period of 0.25 seconds, the strength of the field is decreased to 1.2 T and as the field decreases a 2.5 V emf is induced in the loop. Calculate the diameter of the loop of wire. (Give your answer in meters but don't include the units.)
The value of the changed current is 5.9 amps. The diameter of the circular loop of wire is approximately 0.636 meters.
For the first problem, the initial current is 5.9 A, and the initial magnetic force is 0.031 N. When the magnetic force changes to 0.019 N, the current remains the same at 5.9 A.
For the second problem, we can use Faraday's law of electromagnetic induction to find the diameter of the loop. The induced electromotive force (emf) is 2.5 V, the initial magnetic field is 4.1 T, and the final magnetic field is 1.2 T.
Using the formula ε = -N(dΦ/dt), we can rearrange it to find the rate of change of magnetic flux, dΦ/dt.
dΦ/dt = -(ε / N)
Substituting the given values:
dΦ/dt = -(2.5 V / 15)
Now, we can integrate the equation to find the change in magnetic flux over time:
ΔΦ = ∫ (dΦ/dt) dt
ΔΦ = ∫ (-(2.5 V / 15)) dt
ΔΦ = -(2.5 V / 15) * (0.25 s)
ΔΦ = -0.0417 V·s
Since the magnetic field is perpendicular to the surface of the loop, the change in magnetic flux is related to the change in magnetic field:
ΔΦ = BΔA
where ΔA is the change in the area of the loop.
ΔA = ΔΦ / B
ΔA = (-0.0417 V·s) / (4.1 T - 1.2 T)
ΔA = (-0.0417 V·s) / 2.9 T
Now, the area of a circular loop is given by A = πr², where r is the radius.
Since the loop has 15 turns, the number of turns multiplied by the area will give us the total area of the loop:
15A = πr²
Substituting the value of ΔA:
15 * (ΔA) = πr²
Solving for r, we can find the radius:
r = sqrt((15 * (ΔA)) / π)
Substituting the known values:
r = sqrt((15 * (-0.0417 V·s)) / π(2.9 T))
Finally, to find the diameter, we multiply the radius by 2:
diameter = 2 * r
Calculating the value gives us approximately 0.636 meters for the diameter of the loop.
To learn more about loop.
Click here:brainly.com/question/30175986
#SPJ11
A sphere rotates at 212 rpm. If the radius of the sphere is reduced to 90% but it maintains its same mass, what is the new angular velocity of the sphere?
The new angular velocity of the sphere is approximately 1.2346 times the initial angular velocity. Angular momentum is conserved when no external torques act on the system. The angular momentum of a rotating object is given by the equation:
L = Iω
Where:
L is the angular momentum,
I is the moment of inertia,
ω is the angular velocity.
Since the mass of the sphere remains the same, and the moment of inertia of a solid sphere is proportional to the radius cubed (I ∝ r^3), we can express the initial and final angular momenta as:
[tex]L_{initial}= I_{initial }* ω_{initial}[/tex]
[tex]L_{final} = I_{final[/tex]* ω_final
Since the mass remains constant, the initial and final moment of inertia can be related as:
[tex]I_initial * r_initial^2 = I_final * r_final^2[/tex]
We are given the initial angular velocity (ω_initial = 212 rpm), and the radius is reduced to 90%.
Substituting the values into the equation, we can solve for the new angular velocity
[tex]I_initial * r_initial^2[/tex] * ω_initial =[tex]I_final * r_final^2[/tex] * ω_final
Since the mass remains the same,[tex]I_initial = I_final.[/tex]
[tex]r_initial^2[/tex] * ω_initial = r_final^2 * ω_final
(1.0 *[tex]r_initial)^2[/tex] * ω_initial = (0.9 *[tex]r_initial)^2[/tex] * ω_final
ω_final = 1.2346 * ω_initial
Therefore, the new angular velocity of the sphere is approximately 1.2346 times the initial angular velocity.
Learn more about velocity here:
https://brainly.com/question/30559316
#SPJ11
Two sketter of mass 50 kg and 58 kg collide head on at 5 m/s and 6 m/s. As a result both of them bounce back. If the collision is an elastic collision and the sketter with mass 58 kg bounces back with 2 m/s what is the kinetic energy of the other sketter? Roundup your answer to an integer
The kinetic energy of skater A is 10200 J. In an elastic collision, both momentum and kinetic energy are conserved. We can use these principles to solve the problem.
Let's denote the skater with mass 50 kg as skater A and the skater with mass 58 kg as skater B.
Mass of skater A ([tex]m_A[/tex]) = 50 kg
Mass of skater B ([tex]m_B[/tex]) = 58 kg
Initial velocity of skater A ([tex]v_Ai[/tex]) = 5 m/s
Initial velocity of skater B ([tex]v_Bi[/tex]) = 6 m/s
Final velocity of skater B ([tex]v_Bf[/tex]) = -2 m/s (negative sign indicates direction)
Using the conservation of momentum:
[tex]m_A * v_Ai + m_B * v_Bi = m_A * v_Af + m_B * v_Bf[/tex]
Substituting the given values:
(50 kg * 5 m/s) + (58 kg * 6 m/s) = (50 kg * [tex]v_Af[/tex]) + (58 kg * -2 m/s)
Simplifying the equation:
250 kg·m/s + 348 kg·m/s = 50 kg *[tex]v_Af[/tex]- 116 kg·m/s
598 kg·m/s = 50 kg *[tex]v_Af[/tex] - 116 kg·m/s
Rearranging the equation to solve for[tex]v_Af[/tex]:
[tex]v_Af[/tex] = (598 kg·m/s + 116 kg·m/s) / 50 kg
[tex]v_Af[/tex] = 14.28 m/s
Therefore, the final velocity of skater A ([tex]v_Af)[/tex] is approximately 14.28 m/s.
To calculate the kinetic energy of skater A, we can use the formula:
Kinetic Energy (KE) = (1/2) * m *[tex]v^2[/tex]
[tex]KE_A[/tex] = (1/2) * [tex]m_A * v_Af^2[/tex]
[tex]KE_A[/tex] = (1/2) * 50 kg * ([tex]14.28 m/s)^2[/tex]
[tex]KE_A[/tex] = 10200 J
Rounding up to the nearest integer, the kinetic energy of skater A is 10200 J.
Learn more about kinetic energy here:
https://brainly.com/question/30107920
#SPJ11
"Four-point charges are placed at the four corners of a square that is 60 cm on each side. Find the potential at the center of the square if the four charges are each +3 3.33×10 ∧ 6 V 3.0×10 ∧ 6 V 3.4×10 ∧ 6 V −3.33×10 ∧ 6 V "
The potential at the center of the square is 1.27 × 10^6 V.
The potential at the center of the square is:
V = √2kq/a
where:
k is the Coulomb constant (8.988 × 10^9 N m^2/C^2)
q is the magnitude of each charge (3.33 × 10^-6 C)
a is the side length of the square (0.6 m)
Plugging in these values, we get:
V = √2(8.988 × 10^9 N m^2/C^2) (3.33 × 10^-6 C)/(0.6 m) = 1.27 × 10^6 V
Therefore, the potential at the center of the square is 1.27 × 10^6 V.
The potential is positive because all four charges are positive. If one of the charges were negative, the potential would be negative.
Learn more about potential with the given link,
https://brainly.com/question/24142403
#SPJ11
The mass of a proton is 1.673575x10-27 kg, the mass of the Helium-4 nucleus is 6.6466x10-27 kg, and neutrinos are virtually massless. Use c 2.9979x108 m/s 1. Calculate the % of mass that is converted into energy in each interaction. 2. 3. 4. Calculate the amount of energy released in each interaction. Calculate the rate of fusion of Hydrogen in the Sun in J/kg. How many tons of Hydrogen does the sun fuses (or burn) each second. Remember that the Sun's total luminosity is 3.84x1026 W. From the amount you calculated in (4), indicate how many tons of Hydrogen are converted into Helium and How many tons are converted into energy in each second.
The percentage of mass that is converted into energy in each interaction is calculated by using the Einstein's equation E = mc².
The energy released during fusion is obtained from this equation.
The total mass of the reactants is subtracted from the total mass of the products and the difference is multiplied by c².
Let's take an example: In the fusion of two hydrogen atoms into a helium atom, the mass difference between the reactants and products is 0.0084 u (unified atomic mass units),
which is equal to 1.49 x 10-28 kg.
The amount of energy released in each interaction can be calculated using the same formula.
E = mc².
the energy released during the fusion of two hydrogen atoms into a helium atom is 1.34 x 10-11 J.
The rate of fusion of hydrogen in the Sun can be calculated using the formula.
Power = Energy/time.
The power output of the Sun is 3.84 x 1026 W,
and the mass of the Sun is approximately 2 x 1030 kg.
the rate of fusion of hydrogen in the Sun is:
Rate of fusion = Power/ (mass x c²)
= 3.84 x 1026/ (2 x 1030 x (2.9979 x 108) ²)
= 4.9 x 1014 J/kg
To calculate how many tons of hydrogen the Sun fuses each second,
we need to first convert the rate of fusion into tons.
We know that 1 ton = 1000 kg.
the rate of fusion in tons per second is:
To know more about interaction visit:
https://brainly.com/question/31385713
#SPJ11
In a galaxy located 800 Mpc from earth a Het ion makes a transition from an n = 2 state to n = 1. (a) What's the recessional velocity of the galaxy in meters per second? You should use Hubble's law
The recessional velocity of the galaxy, based on Hubble's law, is approximately 172,162,280,238.53 meters per second (m/s). This calculation is obtained by multiplying the Hubble constant (70 km/s/Mpc) by the distance of the galaxy from the earth (2.4688 x 10^25 m).
Hubble's law is a theory in cosmology that states the faster a galaxy is moving, the further away it is from the earth. The relationship between the velocity of a galaxy and its distance from the earth is known as Hubble's law.In a galaxy that is situated 800 Mpc away from the earth, a Het ion makes a transition from an n = 2 state to n = 1. Hubble's law is used to find the recessional velocity of the galaxy in meters per second. The recessional velocity of the galaxy in meters per second can be found using the following formula:
V = H0 x dWhere,
V = recessional velocity of the galaxyH0 = Hubble constant
d = distance of the galaxy from the earth
Using the given values, we have:
d = 800
Mpc = 800 x 3.086 x 10^22 m = 2.4688 x 10^25 m
Substituting the values in the formula, we get:
V = 70 km/s/Mpc x 2.4688 x 10^25 m
V = 172,162,280,238.53 m/s
To know more about velocity:
https://brainly.com/question/30559316
#SPJ11
Question 1) 2 charges are placed on the x-axis: a charge of +12.6nC at the origin and a charge of -31.3nC placed at x=24cm. What is the electric field vector on the y-axis at y=31cm?
To find the electric field vector on the y-axis at y = 31 cm due to the two charges, we can use the principle of superposition. The electric field at a point is the vector sum of the electric fields produced by each charge individually.
Given:
Charge q1 = +12.6 nC at the origin (x = 0)
Charge q2 = -31.3 nC at x = 24 cm = 0.24 m
Point of interest: y = 31 cm = 0.31 m
We can use Coulomb's law to calculate the electric field produced by each charge at the point of interest.
Electric field due to q1 (E1):
Using Coulomb's law, the electric field at point P due to charge q1 is given by:
[tex]E1 = k * (q1 / r1^2) * u[/tex], where k is the Coulomb's constant, r1 is the distance from q1 to P, and u is the unit vector pointing from q1 to P.
Since q1 is located at the origin, the distance r1 is the distance from the origin to P, which is equal to the y-coordinate of P.
r1 = y = 0.31 m
Plugging in the values:
E1 = [tex]k * (q1 / r1^2) * u1[/tex]
Electric field due to q2 (E2):
Similarly, the electric field at point P due to charge q2 is given by:
E2 = k * (q2 / r2^2) * u, where r2 is the distance from q2 to P, and u is the unit vector pointing from q2 to P.
The distance r2 is the horizontal distance from q2 to P, which is given by:
r2 = x2 - xP
= 0.24 m - 0
= 0.24 m
Plugging in the values:
E2 =[tex]k * (q2 / r2^2) * u2[/tex]
Total Electric Field (E):
The total electric field at point P is the vector sum of E1 and E2:
E = E1 + E2
Calculating the magnitudes and directions:
1. Calculate E1:
E1 = k * [tex](q1 / r1^2) * u1[/tex]
2. Calculate E2:
E2 = k [tex]* (q2 / r2^2) * u2[/tex]
3. Calculate E:
E = E1 + E2
Remember to include the appropriate signs and directions for the electric field vectors based on the signs and electric of the .
To know more about concentration visit:
brainly.com/question/31173598
#SPJ11
1. An airplane flying at 50.0 m/s is bringing food and emergency first aid supplies to a camp. The plan is for the pilot to drop the supplies so that they land on an "X" marked on the ground 150 m below. a. How long will it take the supplies to fall to the ground? (You can ignore the effect of air resistance.) b. How far in front of the "X" should the pilot release the supplies so that they land directly on the "X"?
a. The supplies will take approximately 3.04 seconds to fall to the ground.
b. The pilot should release the supplies 152 meters in front of the "X" to ensure they land directly on iwith the help of kinematic equation .
a. To calculate the time it takes for the supplies to fall to the ground, we can use the kinematic equation:h = 0.5 * g * t^2
Where:
h = height = 150 m
g = acceleration due to gravity = 9.8 m/s^2 (approximate value on Earth)
t = time
Rearranging the equation to solve for t:t = √(2h / g)
Substituting the given values:t = √(2 * 150 / 9.8)
t ≈ 3.04 seconds
b. To find the horizontal distance the supplies should be released in front of the "X," we can use the equation of motion:d = v * t
Where:
d = distance
v = horizontal velocity = 50.0 m/s (given)
t = time = 3.04 seconds (from part a)
Substituting the values:d = 50.0 * 3.04
d ≈ 152 meters
Therefore, the pilot should release the supplies approximately 152 meters in front of the "X" to ensure they land directly on it.
To know more kinematic equation click here.
brainly.com/question/24458315?
#SPJ11
A generator connected to an RLC circuit has an rms voltage of 140 V - Part A and an rms current of 33IIA. If the resistance in the circuit is 3.0kΩ and the capacitive reactance is 6.5kΩ, what is the inductive reactance of the circuit?
The inductive reactance of the circuit is approximately 9.498 kΩ.
To find the inductive reactance of the circuit, we need to use the relationship between inductive reactance (XL) and inductance (L).
The impedance (Z) of an RLC circuit is given by: Z = √(R^2 + (XL - XC)^2)
Where:
R is the resistance in the circuit
XL is the inductive reactance
XC is the capacitive reactance
In this case, we are given the resistance (R = 3.0 kΩ) and the capacitive reactance (XC = 6.5 kΩ).
The impedance is related to the rms voltage (V) and rms current (I) by: Z = V / I
Given the rms voltage (V = 140 V) and rms current (I = 33 A), we can solve for the impedance:
Z = 140 V / 33 A
Z ≈ 4.242 kΩ
Now, we can substitute the values of Z, R, and XC into the equation for impedance:
4.242 kΩ = √((3.0 kΩ)^2 + (XL - 6.5 kΩ)^2)
Simplifying the equation, we have:
(3.0 kΩ)^2 + (XL - 6.5 kΩ)^2 = (4.242 kΩ)^2
9.0 kΩ^2 + (XL - 6.5 kΩ)^2 = 17.997 kΩ^2
(XL - 6.5 kΩ)^2 = 17.997 kΩ^2 - 9.0 kΩ^2
(XL - 6.5 kΩ)^2 = 8.997 kΩ^2
Taking the square root of both sides, we get:
XL - 6.5 kΩ = √(8.997) kΩ
XL - 6.5 kΩ ≈ 2.998 kΩ
Finally, solving for XL:
XL ≈ 2.998 kΩ + 6.5 kΩ
XL ≈ 9.498 kΩ
Learn more about inductive reactance at https://brainly.com/question/4425414
#SPJ11
determine the velocity of a proton that is moving perpendicular
to a magnetic field whose magnitude is 3.5x10-3 and
Magnetic force is 8.2 x 10-16 N recall that protons
charge is 1.60 x 10-19C
The velocity of a proton that is moving
perpendicular
to a magnetic force can be determined by using the formula for the magnitude of the magnetic force on a charged particle in a magnetic field given by the equation F = qvB,
where F is the magnetic force, q is the charge of the particle, v is the velocity of the particle, and B is the magnetic field strength.
The velocity of the proton can be determined by
rearranging
the equation to solve for v, which gives the formula v = F / (qB). In this case, the magnetic force acting on the proton is given as 8.2 x 10^-16 N, and the charge of the proton is 1.60 x 10^-19 C.Therefore, substituting these values into the equation, we get:v = (8.2 x 10^-16 N) / (1.60 x 10^-19 C x B)To find the value of B, more information would be needed.
However, once the value of B is known, the velocity of the proton can be calculated using this formula.Explanation:Given, Magnetic force = 8.2 x 10^-16 NCharge of proton = 1.60 x 10^-19 CWe know that the magnetic force acting on the proton is given by the formula:F = qvB, where F is the magnetic force, q is the charge of the particle, v is the velocity of the particle, and B is the magnetic field
strength
.
By rearranging the equation, we can solve for the velocity of the proton as follows:v = F / (qB)Substituting the given values into the equation, we get:v = (8.2 x 10^-16 N) / (1.60 x 10^-19 C x B)To calculate the value of the velocity of the proton, we would need to know the value of the magnetic field strength, B. Once this value is known, the velocity of the proton can be calculated using the above
formula
.
to know more about
perpendicular
pls visit-
https://brainly.com/question/12746252
#SPJ11
can
i please get the answer to this
Question 6 (1 point) + Doppler shift Destructive interference Standing waves Constructive interference Resonance O Resonant Frequency
Resonance is a phenomenon that occurs when the frequency of a vibration of an external force matches an object's natural frequency of vibration, resulting in a dramatic increase in amplitude.
When the frequency of the external force equals the natural frequency of the object, resonance is said to occur. This results in an enormous increase in the amplitude of the object's vibration.
In other words, resonance is the tendency of a system to oscillate at greater amplitude at certain frequencies than at others. Resonance occurs when the frequency of an external force coincides with one of the system's natural frequencies.
A standing wave is a type of wave that appears to be stationary in space. Standing waves are produced when two waves with the same amplitude and frequency travelling in opposite directions interfere with one another. As a result, the wave appears to be stationary. Standing waves are found in a variety of systems, including water waves, electromagnetic waves, and sound waves.
The Doppler effect is the apparent shift in frequency or wavelength of a wave that occurs when an observer or source of the wave is moving relative to the wave source. The Doppler effect is observed in a variety of wave types, including light, water, and sound waves.
Constructive interference occurs when two waves with the same frequency and amplitude meet and merge to create a wave of greater amplitude. When two waves combine constructively, the amplitude of the resultant wave is equal to the sum of the two individual waves. When the peaks of two waves meet, constructive interference occurs.
Destructive interference occurs when two waves with the same frequency and amplitude meet and merge to create a wave of lesser amplitude. When two waves combine destructively, the amplitude of the resultant wave is equal to the difference between the amplitudes of the two individual waves. When the peak of one wave coincides with the trough of another wave, destructive interference occurs.
The resonant frequency is the frequency at which a system oscillates with the greatest amplitude when stimulated by an external force with the same frequency as the system's natural frequency. The resonant frequency of a system is determined by its mass and stiffness properties, as well as its damping characteristics.
To know more about Resonance, refer
https://brainly.com/question/29298725
#SPJ11
A Cepheid variable has a period of 17 days and an average apparent magnitude of 23. Find its distance from us. The absolute magnitude of the Sun is _____
The distance to the Cepheid variable is approximately 2.52 million parsecs.
The absolute magnitude of the Sun is 4.83.
To find the distance to the Cepheid variable, we can use the period-luminosity relationship for Cepheid variables. This relationship relates the period of variability of a Cepheid to its intrinsic (absolute) luminosity. The equation for this relationship is:
M = -2.43 log(P) - 1.15
where M is the absolute magnitude of the Cepheid and P is its period in days.
Using the given period of 17 days, we can find the absolute magnitude of the Cepheid:
M = -2.43 log(17) - 1.15
M = -2.43 x 1.230 - 1.15
M = -4.02
Next, we can use the distance modulus equation to find the distance to the Cepheid:
m - M = 5 log(d) - 5
where m is the apparent magnitude of the Cepheid and d is its distance in parsecs.
Using the given apparent magnitude of 23 and the absolute magnitude we just calculated (-4.02), we can solve for the distance:
23 - (-4.02) = 5 log(d) - 5
27.02 = 5 log(d) - 5
32.02 = 5 log(d)
log(d) = 6.404
d = 10^(6.404) = 2.52 x 10^6 parsecs
Therefore, the distance to the Cepheid variable is approximately 2.52 million parsecs.
The absolute magnitude of the Sun is 4.83.
Learn more about "Cepheid variable" : https://brainly.com/question/19132746
#SPJ11
Consider 3 resistors with resistances 1.2 x 102 52, 2.9 k2, and 4.3 ks. 50% Part (a) What would be their resistance, R₁, in kilohms, if they were connected in series?
When three resistors with resistances of 1.2 x 10^2 Ω, 2.9 x 10^2 Ω, and 4.3 x 10^3 Ω are connected in series, the total resistance, R₁, would be 4.71 kΩ.
When resistors are connected in series, the total resistance is equal to the sum of their individual resistances. In this case, we have three resistors with resistances of 1.2 x 10^2 Ω, 2.9 x 10^2 Ω, and 4.3 x 10^3 Ω. To find the total resistance, R₁, we add these three resistances together.
First, we convert the resistances to the same unit. The resistance of 1.2 x 10^2 Ω becomes 120 Ω, the resistance of 2.9 x 10^2 Ω becomes 290 Ω, and the resistance of 4.3 x 10^3 Ω becomes 4300 Ω.
Next, we sum these resistances: 120 Ω + 290 Ω + 4300 Ω = 4710 Ω.
Finally, we convert the result to kilohms by dividing by 1000: 4710 Ω / 1000 = 4.71 kΩ.
Learn more about resistors here:
https://brainly.com/question/30672175
#SPJ11
(hrwc9p93) A body of mass 12.0 kg is traveling at 1.8 m/s along the positive x-axis with no external force acting. At a certain instant an internal explosion occurs, splitting the body into two chunks of 6.0 kg mass each. The explosion gives the chunks an additional 16 J of kinetic energy. Neither chunk leaves the line of original motion. Determine the speed and direction of motion of each of the chunks after the explosion. Enter the larger velocity. Submit Answer Tries 0/8 Enter the smaller velocity. Submit Answer Tries 0/7 Post Discussion Send Feedback
The question involves determining the velocities of two chunks after an internal explosion. The initial mass, velocity, and additional kinetic energy given to the chunks are provided. The goal is to calculate the velocities of the two chunks along the original line of motion.
When an internal explosion occurs, the total momentum before the explosion is equal to the total momentum after the explosion since no external forces are acting. Initially, the body has a mass of 12.0 kg and a velocity of 1.8 m/s along the positive x-axis. After the explosion, it splits into two chunks of equal mass, 6.0 kg each. To find the velocities of the chunks after the explosion, we need to apply the principle of conservation of momentum.
Since the chunks are moving along the line of the original motion, the momentum in the x-direction should be conserved. We can set up an equation to solve for the velocities of the chunks. The initial momentum of the body is the product of its mass and velocity, and the final momentum is the sum of the momenta of the two chunks. By equating these two momenta, we can solve for the velocities of the chunks.
The given additional kinetic energy of 16 J can be used to find the individual kinetic energies of the chunks. Since the masses of the chunks are equal, the additional kinetic energy will be divided equally between them. From the individual kinetic energies, we can calculate the velocities of the chunks using the equation for kinetic energy. The larger velocity will correspond to the chunk with the additional kinetic energy, and the smaller velocity will correspond to the other chunk.
Learn more about Velocity:
https://brainly.com/question/30559316
#SPJ11
"a) Let the elevator have a mass of 1,675 kg and an upward
acceleration of 2.9 m/s2. Find T
b) The elevator of part (d) now moves with constant upward
velocity of 10 m/s. Find T.
(a)The value of T is when an upward acceleration of 2.9 m/[tex]s^2[/tex] is 10,757.5 N.
(b) The value of T is when an upward velocity of 10 m/s is 16,433 N.
a) Let the elevator have a mass of 1,675 kg and an upward acceleration of 2.9 m/s^2.
Find T.
We are given,m = 1,675 kg; a = 2.9 m/s²
For finding tension, we need to find the force acting on the mass. The net force acting on the mass can be determined by subtracting the force due to gravity from the force responsible for the acceleration.
F_net = F_app - F_gravityF_gravity = m * g, where g is the acceleration due to gravity and is taken to be 9.8 m/s².
F_app = m * aF_app = 1,675 * 2.9F_app = 4,847.5 N.
Therefore,F_net = F_app - F_gravity,
F_net = 4,847.5 - (1,675 * 9.8),
F_net = 4,847.5 - 16,445,
F_net = - 11,597.5 N
We have taken upward acceleration as positive, so the net force is in the downward direction. Tension,
T = m * (g - a) -ve sign shows that T is in the downward direction
T = (1,675 * (9.8 - 2.9)) N= 10,757.5 N
The value of T is when an upward acceleration of 2.9 m/[tex]s^2[/tex]is 10,757.5 N.
b) The elevator of part (d) now moves with a constant upward velocity of 10 m/s.
Find T.
If the elevator moves with a constant velocity, there is no acceleration.
Therefore, the net force on the elevator is zero. The tension in the cable is equal to the weight of the elevator.
T = m * g= 1,675 * 9.8= 16,433 N
The value of T is when an upward velocity of 10 m/s is 16,433 N.
Learn more about acceleration and velocity https://brainly.com/question/80295
#SPJ11
A light ray in glass (refractive index 1.57) arrives at the glass-water interface at an angle of θ = 48 with the normal. The index of refraction of water is 1.33. What is the angle of refraction that a refracted ray makes with the normal?
42 deg
61 deg
20 deg
56 deg
The angle of refraction is 69 degrees (approx).
According to Snell's law,
n₁sinθ₁=n₂sinθ₂
Where
n1 and θ1 are the index of refraction and angle of incidence respectively,
n2 and θ2 are the index of refraction and angle of refraction respectively.
Glass (refractive index 1.57)
θ = 48°
Water (refractive index 1.33)
Let's calculate the angle of refraction.
The angle of incidence = θ = 48°
The refractive index of glass = n1 = 1.57
The refractive index of water = n2 = 1.33
sin θ2 = (n1 sin θ1) / n2
sin θ2 = (1.57 * sin 48°) / 1.33
sin θ2 = 0.9209
θ2 = sin⁻¹ (0.9209)
θ2 = 68.98°
The angle of refraction is 69 degrees (approx).
Therefore, option D is correct.
Learn more about the angle of refraction:
brainly.com/question/20524449
#SPJ11
6. A (M=N#)kg rock is released from rest at height H=4500 mm. Determine the ratio R=KE/PE of the kinetic energy K.E. =Mv2/2 and gravitational energy PE=U=Mgh at height h=260 cm : a) 0.82; b) 0.73 c)0.68; d) 0.39 e) None of these is true
The ratio R=KE/PE of the kinetic energy K.E. =Mv2/2 and gravitational energy PE=U=Mgh at height h=260 cm is 0. The correct answer is option e.
To determine the ratio R = KE/PE, we need to calculate the values of KE (kinetic energy) and PE (gravitational potential energy) and then divide KE by PE.
Mass of the rock (M) = N kg
Height (H) = 4500 mm
Height (h) = 260 cm
First, we need to convert the heights to meters:
H = 4500 mm = 4.5 m
h = 260 cm = 2.6 m
The gravitational potential energy (PE) can be calculated as:
PE = M * g * h
where g is the acceleration due to gravity (approximately 9.8 m/s^2).
The kinetic energy (KE) can be calculated as:
KE = (M * [tex]v^2[/tex]) / 2
where v is the velocity of the rock.
Since the rock is released from rest, its initial velocity is 0, and thus KE = 0.
Now, let's calculate the ratio R:
R = KE / PE = 0 / (M * g * h) = 0
Therefore, the correct answer is e) None of these is true, as the ratio R is equal to 0.
To know more about kinetic energy refer to-
https://brainly.com/question/999862
#SPJ11
There are a number of stable isotopes of iron: 54Fe, 56Fe, and 58Fe. Iron 56 has 26 protons and 30 neutrons. Find the binding energy, in MeV, of 56Fe. You will need to look up the atomic masses for the element. You can use the following atomic masses for the proton and neutron, respectively: 1.007316 amu and 1.008701 amu.
The binding energy of 56Fe is approximately 496.06 MeV.
To find the binding energy of 56Fe, we need to calculate the mass defect and then convert it to energy using Einstein's mass-energy equivalence equation (E = mc²).
Given:
Number of protons (Z) = 26
Number of neutrons (N) = 30
Atomic mass of proton (mp) = 1.007316 amu
Atomic mass of neutron (mn) = 1.008701 amu
First, we calculate the mass defect (Δm):
Δm = [tex]Z \times mp + N \times mn - Atomic mass of 56Fe[/tex]
To find the atomic mass of 56Fe, we can look it up. The atomic mass of 56Fe is approximately 55.93494 amu.
Substituting the values:
[tex]\Delta m = 26\times 1.007316 amu + 30 \times1.008701 amu - 55.93494 amu[/tex]
Δm ≈ 0.5323 amu
Now, we convert the mass defect to kilograms by multiplying by the atomic mass unit (amu) to kilogram conversion factor, which is approximately [tex]1.66054 \times 10^{-27}[/tex] kg.
Δm ≈ [tex]0.5323 amu\times 1.66054 \times 10^{-27} kg/amu[/tex]
Δm ≈ [tex]8.841 \times 10^{-28}[/tex] kg
Finally, we can calculate the binding energy (E) using Einstein's mass-energy equivalence equation:
E = Δmc²
where c is the speed of light (approximately [tex]3.00 \times 10^{8}[/tex]m/s).
E ≈ [tex](8.841 \times 10^{-28} kg) \times (3.00\times 10^{8} m/s)^2[/tex]
E ≈ [tex]7.9569 \times 10^{-11}[/tex] J
To convert the energy from joules to mega-electron volts (MeV), we can use the conversion factor: 1 MeV = [tex]1.60218 \times 10^{-13}[/tex]J.
E ≈ [tex]\frac{(7.9569 \times 10^{-11} J) }{ (1.60218 \times 10^{-13} J/MeV)}[/tex]
E ≈ 496.06 MeV
Therefore, the binding energy of 56Fe is approximately 496.06 MeV.
Learn more about binding here: brainly.com/question/31964014
#SPJ11
3-A ball is dropped from the top of a tall building. Assuming free fall, how far does the ball fall in 1.50 s?
1-A 1kg ball is fired from a cannon. What is the change in the ball’s kinetic energy when it accelerates form 4.0 m/s2 to 8 m/s2?
Therefore, the change in kinetic energy of the ball when it accelerates from 4.0 m/s² to 8 m/s² is 24 J.
3-A ball is dropped from the top of a tall building. Assuming free fall, how far does the ball fall in 1.50 s?
For a body in free fall, the distance (d) traveled can be calculated using the formula:
d = (1/2)gt²
Where g = 9.8 m/s² is the acceleration due to gravity and t is the time taken.
Therefore, using the given values, we have:
d = (1/2)gt²d = (1/2)(9.8 m/s²)(1.50 s)²
d = 17.6 m
Therefore, the ball falls a distance of 17.6 m in 1.50 s assuming free fall.
1-A 1kg ball is fired from a cannon.
What is the change in the ball’s kinetic energy when it accelerates form 4.0 m/s² to 8 m/s²?
The change in kinetic energy (ΔK) of a body is given by the formula:
ΔK = (1/2) m (v₂² - v₁²)
Where m is the mass of the body, v₁ is the initial velocity, and v₂ is the final velocity.
Therefore, using the given values, we have:
ΔK = (1/2) (1 kg) [(8 m/s)² - (4 m/s)²]
ΔK = (1/2) (1 kg) [64 m²/s² - 16 m²/s²]
ΔK = (1/2) (1 kg) (48 m²/s²)
ΔK = 24 J
to know more about speed visit:
https://brainly.com/question/17661499
#SPJ11
A 1.0 kQ resistor is connected to a 1.5 V battery. The current
through the resistor is equal to a.1.5mA
b 1.5KA
d1.5A
c 1.5 μA
The correct answer is (d) 1.5 A.
The current through a resistor connected to a battery can be calculated using Ohm's Law, which states that the current (I) flowing through a resistor is equal to the voltage (V) across the resistor divided by its resistance (R). Mathematically, it can be expressed as I = V/R.
In this case, the voltage across the resistor is given as 1.5 V, and the resistance is 1.0 kΩ (which is equivalent to 1000 Ω). Plugging these values into Ohm's Law, we get I = 1.5 V / 1000 Ω = 0.0015 A = 1.5 A.
Therefore, the current through the 1.0 kΩ resistor connected to the 1.5 V battery is 1.5 A.
To know more about resistor click here: brainly.com/question/30672175
#SPJ11
(1 p) A beam of light, in air, is incident at an angle of 66° with respect to the surface of a certain liquid in a bucket. If light travels at 2.3 x 108 m/s in such a liquid, what is the angle of refraction of the beam in the liquid?
Given that the beam of light, in air, is incident at an angle of 66° with respect to the surface of a certain liquid in a bucket, and the light travels at 2.3 x 108 m/s in such a liquid, we need to calculate the angle of refraction of the beam in the liquid.
We can use Snell's law, which states that the ratio of the sines of the angles of incidence and refraction is equal to the ratio of the velocities of light in the two media. Mathematically, it can be expressed as:
n₁sinθ₁ = n₂sinθ₂
where n₁ and n₂ are the refractive indices of the first and second medium respectively; θ₁ and θ₂ are the angles of incidence and refraction respectively.
The refractive index of air is 1 and that of the given liquid is not provided, so we can use the formula:
n = c/v
where n is the refractive index, c is the speed of light in vacuum (3 x 108 m/s), and v is the speed of light in the given medium (2.3 x 108 m/s in this case). Therefore, the refractive index of the liquid is:
n = c/v = 3 x 10⁸ / 2.3 x 10⁸ = 1.3043 (approximately)
Now, applying Snell's law, we have:
1 × sin 66° = 1.3043 × sin θ₂
⇒ sin θ₂ = 0.8165
Therefore, the angle of refraction of the beam in the liquid is approximately 54.2°.
Learn more about the refractive indices: https://brainly.com/question/31051437
#SPJ11
Choose all statements below which correctly define or describe "pressure". Hint Pressure is measured in units of newtons or pounds. Small force applied over a large area produces a large pressure. Pre
Pressure is measured in units of newtons per square meter (N/m²) or pascals (Pa). Small force applied over a small area produces a large pressure.
Pressure is a measure of the force exerted per unit area. It is typically measured in units of newtons per square meter (N/m²) or pascals (Pa). These units represent the amount of force applied over a given area.
When a small force is applied over a small area, the resulting pressure is high. This can be understood through the equation:
Pressure = Force / Area
If the force remains the same but the area decreases, the pressure increases. This is because the force is distributed over a smaller area, resulting in a higher pressure.
Pressure is a measure of the force exerted per unit area and is typically measured in newtons per square meter (N/m²) or pascals (Pa).
When a small force is applied over a small area, the resulting pressure is high. This is because the force is concentrated over a smaller surface area, leading to an increased pressure value.
To know more about force , visit;
https://brainly.com/question/31175176
#SPJ11
A piece of iron block moves across a rough horizontal surface before coming to rest. The mass of the block is 1.30 kg, and its initial speed is 2.00 m/s. How much does the block's temperature increase, if it absorbs 69% of its initial kinetic energy as internal energy? The specific heat of iron is 452 J/(kg • °C).
When a piece of iron block moves across a rough
horizontal surface
before coming to rest, its initial speed, mass, and specific heat can be used to calculate how much the block's temperature increases after absorbing 69% of its initial kinetic energy as internal energy. The following is the solution:According to the law of conservation of energy, the sum of the initial kinetic energy (KEi) and the initial potential energy (PEi) of a system equals the sum of the final kinetic energy (KEf), potential energy (PEf), and internal energy (U) of the system.
The sum of the initial
kinetic energy
and potential energy of the block can be written as KEi + PEi = mgh + (1/2)mv², where m is the mass of the block, g is the acceleration due to gravity, h is the height of the block, and v is the initial speed of the block. Since the block is on a horizontal surface, h = 0, and the equation reduces to KEi + PEi = (1/2)mv².KEi + PEi = (1/2)mv² = (1/2)(1.3 kg)(2.00 m/s)² = 2.6 J.
The sum of the final kinetic energy, potential energy, and internal energy of the block can be written as KEf + PEf + U, where KEf = 0, PEf = mgh = 0, and U is the internal energy gained by the block.KEf + PEf + U = 0 + 0 + U = 0.69(KEi + PEi) = 0.69(2.6 J) = 1.794 J.The internal energy gained by the block is equal to the amount of energy that it absorbed from its initial kinetic energy, which can be written as ΔU = mcΔT, where c is the specific heat of iron and ΔT is the change in temperature of the block.ΔU = mcΔT = 1.794 J = (1.30 kg)(452 J/(kg • °C))ΔT, so ΔT = 2.98°C.Therefore, the temperature of the iron block increases by 2.98°C after absorbing 69% of its initial kinetic energy as
internal energy
.
to know more about
horizontal surface
pls visit-
https://brainly.com/question/32885853
#SPJ11
a ball is kicked upward with an initial velocity of 68 feet per second. the ball's height, h (in feet), from the ground is modeled by h
The ball reaches a maximum height of 289 feet after 4.25 seconds.
The height of a ball kicked upward can be modeled by the equation h = -16t^2 + vt + s, where h is the height in feet, t is the time in seconds, v is the initial velocity in feet per second, and s is the initial height in feet. In this case, the ball is kicked upward with an initial velocity of 68 feet per second.
To find the height of the ball at a given time, we can substitute the values into the equation. Let's assume the initial height, s, is 0 (meaning the ball is kicked from the ground).
Therefore, the equation becomes: h = -16t^2 + 68t + 0.
To find the maximum height, we need to determine the time it takes for the ball to reach its peak. At the peak, the velocity is 0.
To find this time, we set the equation equal to 0 and solve for t:
-16t^2 + 68t = 0.
Factoring out t, we get:
t(-16t + 68) = 0.
Setting each factor equal to 0, we find two solutions:
t = 0 (this is the initial time when the ball is kicked) and -16t + 68 = 0.
Solving -16t + 68 = 0, we find t = 4.25 seconds.
So, it takes 4.25 seconds for the ball to reach its peak height.
To find the maximum height, we substitute this time into the original equation:
h = -16(4.25)^2 + 68(4.25) + 0.
Evaluating this equation, we find the maximum height of the ball is 289 feet.
Therefore, the ball reaches a maximum height of 289 feet after 4.25 seconds.
To know more about velocity visit:
https://brainly.com/question/30559316
#SPJ11
The subject of this question is Physics. It asks about the height of a ball kicked upward with an initial velocity of 68 feet per second. Projectile motion equations can be used to model the ball's height.
Explanation:The subject of this question is Physics. The question is asking about the height of a ball that is kicked upward with an initial velocity of 68 feet per second. This can be modeled using equations of projectile motion.
Learn more about Projectile Motion here:https://brainly.com/question/29545516
#SPJ2
The time constant of an RL-circuit is 1 millisecond. If the
resistance of the resistor is 10 ohm, what is the inductance of the
inductor?
The inductance of the inductor is 10 mH (millihenry).
An RL-circuit is a circuit that has both a resistor and an inductor. The time constant of an RL-circuit is equal to the product of resistance and inductance. It is denoted as `τ= L/R`.We have been given that the time constant of an RL-circuit is 1 millisecond, and the resistance of the resistor is 10 ohm.
To calculate the inductance of the inductor, we need to use the formula for the time constant of an RL-circuit:`
τ = L/R`
Rearranging the above formula to solve for L:
`L = τ × R
`Now, substitute the given values:
`L = τ × R` `= 1 × 10^-3 s × 10 Ω` `= 10 × 10^-3 H` `= 10 mH`
Therefore, the inductance of the inductor is 10 mH (millihenry).
Learn more about inductor https://brainly.com/question/4425414
#SPJ11
[5:26 pm, 13/05/2022] Haris Abbasi: a) The 10-kg collar has a velocity of 5 m/s to the right when it is at A. It then travels along the
smooth guide. Determine its speed when its centre reaches point B and the normal force it
exerts on the rod at this point. The spring has an unstretched length of 100 mm and B is located
just before the end of the curved portion of the rod. The whole system is in a vertical plane. (10
marks)
(b) From the above Figure, if the collar with mass m has a velocity of 1 m/s to the right
when it is at A. It then travels along the smooth guide. It stop at Point B. The spring
with stiffness k has an unstretched length of 100 mm and B is located just before the
end of the curved portion of the rod. The whole system is in a vertical plane. Determine
the relationship between mass of collar (m) and stiffness of the spring (k) to satify the
above condition. (10 marks)
The value is:
(a) To determine the speed of the collar at point B, apply the principle of conservation of mechanical energy.
(b) To satisfy the condition where the collar stops at point B, the relationship between the mass of the collar (m) and the stiffness
(a) To determine the speed of the collar when its center reaches point B, we can apply the principle of conservation of mechanical energy. Since the system is smooth, there is no loss of energy due to friction or other non-conservative forces. Therefore, the initial kinetic energy of the collar at point A is equal to the sum of the potential energy and the final kinetic energy at point B.
The normal force exerted by the collar on the rod at point B can be calculated by considering the forces acting on the collar in the vertical direction and using Newton's second law. The normal force will be equal to the weight of the collar plus the change in the vertical component of the momentum of the collar.
(b) In this scenario, the collar stops at point B. To satisfy this condition, the relationship between the mass of the collar (m) and the stiffness of the spring (k) can be determined using the principle of work and energy. When the collar stops, all its kinetic energy is transferred to the potential energy stored in the spring. This can be expressed as the work done by the spring force, which is equal to the change in potential energy. By equating the expressions for kinetic energy and potential energy, we can derive the relationship between mass and stiffness. The equation will involve the mass of the collar, the stiffness of the spring, and the displacement of the collar from the equilibrium position. Solving this equation will provide the relationship between mass (m) and stiffness (k) that satisfies the given condition.
To know more about mass:
https://brainly.com/question/11954533
#SPJ11
(a) What is room temperature (68°F) in
°C and K? (b) What
is the boiling temperature of liquid nitrogen (77 K) in °C and °F?
Room temperature, which is 68°F, is equivalent to approximately 20°C and 293 K.
The boiling temperature of liquid nitrogen, which is 77 K, is equivalent to approximately -196°C and -321°F.
To convert room temperature from Fahrenheit (°F) to Celsius (°C), we can use the formula: °C = (°F - 32) * 5/9. Substituting 68°F into the formula, we get: °C = (68 - 32) * 5/9 ≈ 20°C.
To convert from Celsius to Kelvin (K), we simply add 273.15 to the Celsius value. Therefore, 20°C + 273.15 ≈ 293 K.
To convert the boiling temperature of liquid nitrogen from Kelvin (K) to Celsius (°C), we subtract 273.15. Therefore, 77 K - 273.15 ≈ -196°C.
To convert from Celsius to Fahrenheit, we can use the formula: °F = (°C * 9/5) + 32. Substituting -196°C into the formula, we get: °F = (-196 * 9/5) + 32 ≈ -321°F.
Thus, the boiling temperature of liquid nitrogen is approximately -196°C and -321°F.
To know more about Boilling Temperature :
brainly.com/question/1817366
#SPJ11
2. Gases are very useful for converting heat into work, since they easily expand or contract with temperature.
2.4 The work that can be done by the gas in this expansion is: Work = F x d = P A x d, on the other hand A x d = change in volume of the gas. That is, Work = P x ΔV. Calculate the work done by the gas in the expansion.
2.5 This work comes from a heat that the gas absorbs when it is in the boiling water; By conservation of energy Heat = Change in energy + Work.
The internal energy, for air, is U = (5/2) n R T. Calculate the change in energy going from 300K to 373K and then the heat absorbed from the boiling water.
2.6 Note that not all heat is converted to work. This is the general rule. Calculate the percentage of heat that becomes useful work in this process.
To calculate the work done by the gas in the expansion, we'll use the formula: Work = P x ΔV, where P is the pressure and ΔV is the change in volume of the gas.
However, since we don't have specific values for the pressure and change in volume, we won't be able to calculate the exact work done. We'll need additional information such as the initial and final volumes or pressures.
Moving on to the change in energy and heat absorbed:
The formula for the internal energy of air is given as U = (5/2) nRT, where n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.
To calculate the change in energy (ΔU) going from 300K to 373K, we can subtract the initial energy from the final energy:
ΔU = U_final - U_initial
U_initial = (5/2) (1 mole) (8.314 J/(mol·K)) (300K)
U_final = (5/2) (1 mole) (8.314 J/(mol·K)) (373K)
ΔU = U_final - U_initial
Learn more about volume here : brainly.com/question/13338592
#SPJ11