a 28 x 10-6 C point charge is held at rest within a uniform Electric field of 50.7 N/C directed in the +x direction. If the charge is moved a distance of 0.68 m in the +x direction, what potential difference did it move through?

To find the charge stored on the capacitor a long time after the switch is closed, we can use the formula for the charge on a capacitor in a series RC circuit:

Q =[tex]C * ε[/tex]

where:

Q = charge stored on the capacitor

C = capacitance (in Farads)

ε = EMF (in volts)

Substituting the given values into the equation, we have:

Q = (20 μF) * (23 V)

To calculate this, we need to convert the capacitance from microfarads to farads. Since 1 μF = 1 × 10^(-6) F, we have:

Q =[tex](20 × 10^(-6) F) * (23 V)x[/tex]

Q =[tex]460 × 10^(-6) C[/tex]

Q = 0.460 C (in microC)

Therefore, the charge stored on the capacitor a long time after the switch is closed is 0.460 microC.

Learn about more :

https://brainly.com/question/33265984

#SPJ11

None of the provided options (11.0%, 12.0%, 100%, 110%) are correct. The correct answer is approximately 4.41%.

To calculate the rate of return of the risk-free portfolio, ready to utilize the concept of the capital allocation line (CAL).

The CAL speaks to a combination of a risky portfolio and a risk-free asset. In this case, we have two unsafe resources (securities X and Y) and need to decide the rate of return of the risk-free portfolio.

The formula for the CAL is:

CAL rate of return = risk-free rate + (portfolio standard deviation / risky asset standard deviation) * (risky asset rate of return - risk-free rate)

Let's plug in the given values:

Risk-free rate = 0% (since it's not specified)

Portfolio standard deviation = ?

Risky asset standard deviation (σX) = 85%

Risky asset rate of return (rX) = 9%

Correlation coefficient (ρ) = -1 (perfectly negatively correlated)

To calculate the portfolio standard deviation, we need the weights of the assets in the portfolio. Since it's not specified, we'll assume an equal weighting for simplicity.

Portfolio standard deviation = sqrt[tex]\sqrt{[(wX^2 * σX^2) + (wY^2 * σY^2) + 2 * wX * wY * ρ * σX * σY]}[/tex]

Assuming equal weights (wX = wY = 0.5):

Portfolio standard deviation = sqrt[tex]\sqrt{[(0.5^2 * 85%^2)}[/tex] +[tex]\sqrt{ (0.5^2 * 12%^2)}[/tex] + [tex]2 * 0.5 * 0.5[/tex]* [tex]-1 * 85% * 12%][/tex]

Simplifying:

Portfolio standard deviation = sqrt[tex]\sqrt{[(0.25 * 0.7225) + (0.25 * 0.0144) - 0.102 * 0.102]}[/tex]

Portfolio standard deviation = [tex]\sqrt{[0.180625 + 0.0036 - 0.010404]}[/tex]

=[tex]\sqrt{(0.173821) }[/tex]

= 0.416783

Now, we can calculate the rate of return of the risk-free portfolio using the CAL formula:

CAL rate of return = 0% + (0.416783 / 0.85) * (9% - 0%)

CAL rate of return = 0 + (0.490335 * 0.09) = 0.044129

Converting to a percentage:

CAL rate of return = 0.044129 * 100% ≈ 4.41%

Therefore, none of the provided options (11.0%, 12.0%, 100%, 110%) are correct. The correct answer is approximately 4.41%.

know more about capital allocation line

https://brainly.com/question/32578200

#SPJ4

The complete question is-

Security X has expected return of 9% and standard deviation of 85%. Security Y has expected return of 14% and standard deviation of 12% The two securities have a correlation coefficient of 10 (perfectly negatively

correlated) The risk-free portfolio that can be formed with the two securities will warn a rate of return of

Select one

Oa 11.0%

Ob 12.0%

O 100%

Od. 110%

None of the options are correct.

(a) The maximum energy stored in the magnetic field of the inductor can be calculated using the formula: E = (1/2) * L * I^2, where L is the inductance and I is the peak current. Plugging in the values, we have E = (1/2) * 76e-3 * (95/5500e-12)^2 = 4.35 J.

(b) The peak value of the current can be calculated using the formula: I = V / sqrt(L/C), where V is the voltage and C is the capacitance. Plugging in the values, we have I = 95 / sqrt(76e-3 / 5500e-12) = 1.37 A.

(c) The circuit's oscillation frequency can be calculated using the formula: f = 1 / (2 * pi * sqrt(L * C)). Plugging in the values, we have f = 1 / (2 * pi * sqrt(76e-3 * 5500e-12)) = 348 Hz.

 To  learn  more  about frequency click on:brainly.com/question/29739263

#SPJ11

The magnetic torque (or moment) of dc motor is given by;τ = NBIAsin(θ)Where N is the number of turns of the coil, B is the magnetic field strength, I is the current, A is the area of the coil and θ is the angle between the direction of the magnetic field and the normal to the plane of the coil

(a) Single-turn square coil, The area of the single-turn square coil is;A = L² ⇒ 1.9² = 3.61 m².The maximum torque is;τ = NBIAsin(θ) = (1)(0.32 T)(1.1 A)(3.61 m²)sin(90) = 1.24 Nm.

(b) Two-turn square coil, The length of wire required for the two-turn square coil is 4L = 7.6 m. The side length is, s = 1.9 m. The area of the two-turn square coil is; A = 2s² = 2(1.9 m)² = 7.22 m².The maximum torque is;τ = NBIAsin(θ) = (2)(0.32 T)(1.1 A)(7.22 m²)sin(90) = 4.48 Nm.

Let's learn more about dc motor:

https://brainly.com/question/15721280

#SPJ11

The pressure in the

ocean

14m below the surface can be calculated as follows

The pressure P due to a fluid of density ρ and depth h is given by the equation: P = ρgh where g is the acceleration due to gravity.1. First, convert the given depth of 14 m into the SI unit of length, meters.2.

Then, substitute the given values of the

density

of ocean water, ρ = 1027 kg/m3, depth h = 14 m and acceleration due to gravity g = 9.8 m/s2 in the equation P = ρgh and calculate the pressure.   P = ρgh     = 1027 kg/m3 × 9.8 m/s2 × 14 m     = 142211.2 kg/(ms2) = 142211.2 N/m2     ≈ 142.2 kPaTherefore, the pressure in the ocean 14 m below the surface is approximately 142.2 kPa.

to know more about

ocean  

pls visit-

https://brainly.com/question/11803537

#SPJ11

The electric field is zero at the point with an x-coordinate of 2.00 m, which is between the two charges.We have two charges, -1.50 nC at point X and +6.50 nC at point X = 4.00 m.

We need to find the point between these charges where the electric field is equal to zero.

We are asked to provide the x-coordinate of that point in meters.

The electric field at a point due to a single point charge is given by Coulomb's Law:

E = k * (Q / r²)

where E is the electric field, k is the electrostatic constant (9 × 10^9 N m²/C²), Q is the charge, and r is the distance between the point charge and the point where the electric field is being calculated.

To find the point between the two charges where the electric field is zero, we need to consider the electric fields produced by both charges. The electric field at the midpoint between two charges will be zero if the magnitudes of the electric fields produced by the charges are equal.

Let's assume the point between the charges is at a distance x from the charge at X and a distance (4.00 - x) from the charge at X = 4.00 m.

Using Coulomb's Law, we can equate the electric fields produced by the two charges:

k * (Q / x²) = k * (3Q / (4.00 - x)²)

Simplifying the equation, we can cancel out the common factors:

Q / x² = 3Q / (4.00 - x)²

Cross-multiplying and rearranging the equation:

(4.00 - x)² = 3x²

Expanding and simplifying:

16 - 8x + x² = 3x²

Rearranging the equation:

2x² - 8x + 16 = 0

Solving this quadratic equation, we find two solutions for x. Taking the positive value, we get x = 2.00 m.

Therefore, the electric field is zero at the point with an x-coordinate of 2.00 m, which is between the two charges.

Learn more about electric field here: brainly.com/question/11482745

#SPJ11

(a) The final temperature, when the pressure triples at constant volume, is 110.6 °C.

(b) The final temperature, when both the pressure and volume are doubled, is 219.3 °C.

To solve both parts of the question, we can use the combined gas law, which states that the ratio of pressure to temperature remains constant when volume is constant:

P1/T1 = P2/T2

Where:

P1 and P2 are the initial and final pressures

T1 and T2 are the initial and final temperatures

Given:

P1 = 5.80 atm (initial pressure)

T1 = 27.5 °C (initial temperature)

(a) When the pressure triples (P2 = 3 * P1) at constant volume:

P2 = 3 * 5.80 atm = 17.40 atm

We can rearrange the equation to solve for T2:

T2 = T1 * (P2 / P1)

Substituting the given values, we get:

T2 = 27.5 °C * (17.40 atm / 5.80 atm) = 110.6 °C

Therefore, the final temperature when the pressure triples is 110.6 °C.

(b) When both the pressure and volume are doubled:

P2 = 2 * P1 = 2 * 5.80 atm = 11.60 atm

We can again use the rearranged equation to solve for T2:

T2 = T1 * (P2 / P1)

Substituting the given values, we get:

T2 = 27.5 °C * (11.60 atm / 5.80 atm) = 55.0 °C

Therefore, the final temperature when both the pressure and volume are doubled is 55.0 °C.

To know more about pressure visit:

https://brainly.com/question/28012687

#SPJ11

As per the conservation of momentum, the momentum of the system before the collision is equal to the momentum after the collision.

It can be given as:

m1u1 + m2u2 = (m1 + m2) v

Here,

m1 = 450 g = 0.45 kg (mass of the box)

m2 = 50 g = 0.05 kg (mass of the bullet)

u2 = 50 m/s

v = final velocity of the combined system

After the collision, the bullet gets embedded in the box.

Thus, the final velocity of the combined system (box + bullet) can be given as:

v = (m1u1 + m2u2)/ (m1 + m2)

v = (0.45 × 0 + 0.05 × 50)/ (0.45 + 0.05)

v = 5 m/s

Now, let's calculate the maximum compression of the spring.

Using the law of conservation of energy, the potential energy stored in the spring is equal to the kinetic energy of the system before the collision.

To know more about conservation visit:

https://brainly.com/question/9530080

#SPJ11

The energy released by the deuterium-deuterium reaction is approximately 4.03 MeV.

To calculate the energy released by the deuterium-deuterium reaction, determine the mass difference before and after the reaction and then convert it to energy using Einstein's mass-energy equivalence equation, E = mc².

Given the atomic masses:

²H (deuterium) = 2.014102 u

³H (tritium) = 3.016050 u

¦H (hydrogen) = 1.007825 u

Initial mass = 2 × (²H) = 2 × 2.014102 u

Final mass = ³H + ¦H = 3.016050 u + 1.007825 u

Mass difference = Initial mass - Final mass

Mass difference = (2 ×2.014102 u) - (3.016050 u + 1.007825 u)

Mass difference = 4.028204 u - 4.023875 u

Mass difference = 0.004329 u

Convert this mass difference to energy using Einstein's equation, E = mc²:

E = (0.004329 u) × (931.5 MeV/u)

E ≈ 4.03 MeV

Therefore, the energy released by the deuterium-deuterium reaction is approximately 4.03 MeV.

To know more about Atomic mass, click here:

https://brainly.com/question/30678413

#SPJ4

A certain source of potential difference causes 3.19 joules of work to be done while transferring 2.76 x 1018 electrons through the load. the current is 3.88 amps, we can substitute the values into the formula: Resistance = Voltage / Current

We can use the formula for electrical work done to find the potential difference (voltage) across the load:

Work = Voltage * Charge

Given that the work done is 3.19 joules and the charge transferred is 2.76 x 10^18 electrons, we can rearrange the formula to solve for voltage:

Voltage = Work / Charge

Substituting the given values:

Voltage = 3.19 J / (2.76 x 10^18 electrons)

Since 1 electron carries a charge of 1.6 x 10^-19 coulombs, we can convert the charge from electrons to coulombs:

Charge (in coulombs) = 2.76 x 10^18 electrons * (1.6 x 10^-19 C/electron)

Now we can calculate the voltage:

Voltage = 3.19 J / (2.76 x 10^18 electrons * (1.6 x 10^-19 C/electron))

Next, we can use Ohm's Law to find the resistance:

Resistance = Voltage / Current

Given that the current is 3.88 amps, we can substitute the values into the formula:

Resistance = Voltage / Current

Now, let's calculate the resistance using the obtained values.

To know more about electrons refer here:

https://brainly.com/question/12001116#

#SPJ11

The question covers topics such as equilibrium extraction data plotting, single-stage extraction calculations, and multiple-stage extraction calculations. The information sought includes phase compositions, flow rates, and compositions of extract and raffinate streams in different extraction scenarios.

In this question, various aspects of liquid-liquid extraction are discussed.

a) The equilibrium extraction data for the water-chloroform-acetone system at 298 K and 1 atm are plotted on a right-triangular diagram. This diagram provides a visual representation of the phase compositions and allows for analysis of the extraction behavior.

b) The same data for the system are plotted on an equilateral triangle diagram. This diagram offers an alternative representation of the phase compositions and facilitates the analysis of ternary liquid-liquid equilibrium.

c) In a specific extraction scenario, pure chloroform is used to extract acetone from a feed mixture containing 60 wt% acetone and 40 wt% water. With an equilibrium stage, the flow rates and compositions of the extract and raffinate streams are determined at 298 K and 1 atm.

d) If the feed from part c) is subjected to three extraction stages using pure chloroform at 298 K, with 8 kg/h of solvent in each stage, the flow rates and compositions of the various streams are calculated. This multiple-stage extraction allows for improved separation efficiency.

Overall, the question covers aspects of equilibrium diagrams, single-stage extraction, and multiple-stage extraction in liquid-liquid extraction processes.

Learn more about flow rates

brainly.com/question/19863408

#SPJ11

To calculate the change in temperature of the lead bullet, we need to determine the amount of energy transferred to the bullet and then use the specific heat capacity of lead. Calculating the expression, the change in temperature (ΔT) of the lead bullet is approximately 0.940 K.

We are given the initial velocity of the bullet, v = 66.0 m/s.

One quarter (1/4) of the kinetic energy goes to the wood, while the rest goes to the bullet.

Specific heat capacity of lead, c = 128 J/kg ∙ K.

First, let's find the kinetic energy of the bullet. The kinetic energy (KE) can be calculated using the formula: KE = (1/2) * m * v^2.

Since the mass of the bullet is not provided, we'll assume a mass of 1 kg for simplicity.

KE_bullet = (1/2) * 1 kg * (66.0 m/s)^2.

Next, let's calculate the energy transferred to the bullet: Energy_transferred_to_bullet = (3/4) * KE_bullet.

Now we can calculate the change in temperature of the bullet using the formula: ΔT = Energy_transferred_to_bullet / (m * c).

Since the mass of the bullet is 1 kg, we have: ΔT = Energy_transferred_to_bullet / (1 kg * 128 J/kg ∙ K).

Substituting the values: ΔT = [(3/4) * KE_bullet] / (1 kg * 128 J/kg ∙ K).

Evaluate the expression to find the change in temperature (ΔT) of the lead bullet.

Calculating the expression, the change in temperature (ΔT) of the lead bullet is approximately 0.940 K.

Therefore, the expected change in temperature of the bullet is 0.940 K.

Read more about Thermal energy.

https://brainly.com/question/3022807

#SPJ11

Heat = (812,436,000,000 m³ × 917,000 g/m³) × 2.09 J/g°C × 0°C

This expression gives us the total amount of heat required in joules to melt the iceberg

To calculate the amount of heat required to melt an iceberg, we need to determine the total volume of the iceberg and then multiply it by the specific heat capacity of ice.

The specific heat capacity of ice is approximately 2.09 joules per gram per degree Celsius.

First, let's convert the dimensions of the iceberg into meters:

Length = 126 km = 126,000 meters

Width = 32.3 km = 32,300 meters

Thickness = 198 m

To find the volume of the iceberg, we multiply these three dimensions:

Volume = Length × Width × Thickness

Volume = 126,000 m × 32,300 m × 198 m

Now, let's calculate the volume:

Volume = 812,436,000,000 cubic meters

Since the density of ice is about 917 kilograms per cubic meter, we can determine the mass of the iceberg:

Mass = Volume × Density

Mass = 812,436,000,000 m³ × 917 kg/m³

Next, let's convert the mass into grams:

Mass = 812,436,000,000 m³ × 917,000 g/m³

Now, we can calculate the heat required to melt the iceberg using the specific heat capacity of ice:

Heat = Mass × Specific heat capacity × Temperature change

The temperature change is the difference between the melting point of ice (0°C) and the initial temperature of the iceberg.

Assuming the initial temperature of the iceberg is also 0°C, the temperature change is 0°C.

Heat = Mass × Specific heat capacity × Temperature change

Heat = (812,436,000,000 m³ × 917,000 g/m³) × 2.09 J/g°C × 0°C

Calculating this expression gives us the total amount of heat required in joules to melt the iceberg.

Learn more about joules from this link:

https://brainly.com/question/25603269

#SPJ11

The water is propagating at 48.3° angle from the normal line.

Given data:Width of the swimming pool = 4.6mIndex of refraction of water = 1.33When light rays pass through a medium of higher refractive index to a medium of lower refractive index, then the angle of incidence is greater than the angle of refraction (as light is bent away from the normal). This is the case when light enters water from air.The angle of incidence of the sunlight is given as 21° above the horizon. As the pool is filled to the top, the angle of incidence in water is the same as that in the air.As the angle of incidence is 21°, the angle of incidence in water would also be 21°.Now, using Snell's law:μ1 sinθ1 = μ2 sinθ2μ1 = 1 (refractive index of air)θ1 = 21°μ2 = 1.33 (refractive index of water)θ2 = ?1 x sin21° = 1.33 x sinθ2sinθ2 = (1 x sin21°)/1.33= 0.2794θ2 = sin-1(0.2794)= 16.7°Therefore, the angle between the light ray and the normal line inside the water is 16.7°.

Thus, the angle between the water propagating ray and the normal line would be:Angle of incidence in water + Angle between the ray and the normal line= 21° + 16.7°= 37.7°Now, the angle of refraction (from the normal line) can be calculated using the Snell's law again:μ1 sinθ1 = μ2 sinθ2μ1 = 1 (refractive index of air)θ1 = 21°μ2 = 1.33 (refractive index of water)θ2 = 37.7° (calculated in the previous step)1 x sin21° = 1.33 x sin37.7°sin37.7° = (1 x sin21°)/1.33= 0.5528θ2 = sin-1(0.5528)= 33.4°Thus, the angle between the water propagating ray and the normal line would be:90° - angle of refraction= 90° - 33.4°= 56.6°Therefore, the angle (from the normal line) at which the water is propagating after it enters the water is 48.3° (which is the sum of the two angles: 16.7° and 37.7°).

To know more about propagating visit:

https://brainly.com/question/31426793

#SPJ11

Explanation:

D. A Step Down Transformer is used to decrease the voltage.

A transformer is a device that is used to transfer electrical energy from one circuit to another by electromagnetic induction. A step-down transformer is a type of transformer that is designed to reduce the voltage from the input to the output.

In a step-down transformer, the number of turns in the secondary coil is less than the number of turns in the primary coil. As a result, the voltage in the secondary coil is lower than the voltage in the primary coil.

Step-down transformers are commonly used in power distribution systems to reduce the high voltage in power lines to a lower, safer voltage level for use in homes and businesses. They are also used in electronic devices to convert high voltage AC power to low voltage AC power, which is then rectified to DC power.

The magnitude of the lift force (L) is 21,500 N. The magnitude of the air resistance, R, that opposes the forward motion of the helicopter is 19,900 N.

The formula used to calculate the magnitude of the lift force is given by L = W × tan(θ),

Where:θ = 21.0°,

W = 53,800 N,

We substitute the values in the formula:

L = 53,800 × tan(21.0°)≈ 21,500 N.

Therefore, the magnitude of the lift force (L) is 21,500 N.

Since the helicopter is moving horizontally to the right at a constant velocity, the magnitude of the air resistance (R) is equal to the magnitude of the horizontal component of the lift force. The horizontal component of the lift force is given by:Horizontal component = L × cos(θ).

We substitute the values in the formula:Horizontal component = 21,500 × cos(21.0°)≈ 19,900 N.Therefore, the magnitude of the air resistance, R, that opposes the forward motion of the helicopter is 19,900 N

The magnitude of the lift force (L) is 21,500 N. The magnitude of the air resistance, R, that opposes the forward motion of the helicopter is 19,900 N. This means that the forward motion of the helicopter is opposed by the air resistance acting on it in the opposite direction. The lift force generated by the rotating blades of the helicopter is used to keep the helicopter in the air. The angle between the lift force and the vertical axis is 21.0°. The weight of the helicopter is W = 53,800 N. The helicopter is moving at a constant velocity in the horizontal direction.

The lift force and air resistance are the only two forces acting on the helicopter, and these forces help to keep the helicopter in the air while it is moving horizontally.

To know more about resistance visit:

brainly.com/question/33728800

#SPJ11

The electric field at that point is 2.22 × 10^5 N/C in the upward direction. The force experienced by a charge q is 3.61 × 10^-6 N in the downward direction.

(a) Electric field at that point = 2.22 × 10^5 N/C(b) Force experienced by charge q = -3.61 × 10^-6 N. The electric field E experienced by a charge q in a particular point in an electric field is given by:E = F/qWhere,F = Force experienced by the charge qandq = charge of the particle(a) Electric field at that pointE = F/q = (4.7 × 10^-6)/(2.1 × 10^-8)= 2.22 × 10^5 N/CTherefore, the electric field at that point is 2.22 × 10^5 N/C in the upward direction.

(b) Force experienced by a charge qF = Eq = (2.22 × 10^5) × (-1.3 × 10^-8)= -3.61 × 10^-6 N. Therefore, the force experienced by a charge q is 3.61 × 10^-6 N in the downward direction.

Learn more on charge here:

brainly.com/question/32449686

#SPJ11

The magnitude of the force at the point (1, 2) is 13.

To find the magnitude of the force at a point (1, 2), we need to calculate the negative gradient of the potential energy function. The force vector is given by:

F = -∇U

Where ∇U is the gradient of U.

To calculate the gradient, we need to find the partial derivatives of U with respect to each coordinate (x and y):

∂U/∂x = dU/dx = 21[tex]x^{6}[/tex] - 8

∂U/∂y = dU/dy = 0

Now we can evaluate the force at the point (1, 2):

F = [-∂U/∂x, -∂U/∂y]

= [-(21[tex](1)^{6}[/tex] - 8), 0]

= [-13, 0]

Therefore, the magnitude of the force at the point (1, 2) is 13.

To know more about force here

https://brainly.com/question/22260425

#SPJ4

In simpler terms, when dividing two terms with the same base, you subtract the exponents. In this case, [tex]x¹⁰[/tex] divided by x⁻⁵ gives us [tex]x¹⁵[/tex], which is the same as the right side of the equation. Therefore, the equation is verified.

To verify the equation[tex]x¹⁰ / x⁻⁵ = x¹⁵,[/tex] let's simplify both sides of the equation.

On the left side of the equation,[tex]x¹⁰ / x⁻⁵[/tex]can be rewritten using the quotient rule of exponents. The rule states that when dividing two terms with the same base, you subtract the exponents. So,[tex]x¹⁰ / x⁻⁵[/tex] becomes [tex]x¹⁰ + ⁵[/tex], which simplifies to [tex]x¹⁵.[/tex]

On the right side of the equation, we have [tex]x¹⁵[/tex].

So, the equation becomes[tex]x¹⁵ = x¹⁵.[/tex]

Since both sides of the equation are equal, we can conclude that the equation[tex]x¹⁰ / x⁻⁵ = x¹⁵[/tex]is true.

In simpler terms, when dividing two terms with the same base, you subtract the exponents. In this case,[tex]x¹⁰[/tex]divided by [tex]x⁻⁵[/tex] gives us[tex]x¹⁵[/tex], which is the same as the right side of the equation. Therefore, the equation is verified.

To know more about verified visit:

https://brainly.com/question/12694638

#SPJ11

In this particular scenario, the distance between the lenses is found to be 2.2cm.

To determine the separation between two identical converging lenses to form an image with the same size and orientation as the original object, it is necessary to use the lens equation and thin lens formula.

Given that the coin is located 19.0cm to the left of the first converging lens with a focal length of 15.0cm, we can use the lens equation to find the position of the image formed by the first lens:

1/19 + 1/i = 1/15

where i is the distance between the first lens and the image.

We know that the second lens will form an image that is the same size and orientation as the original object. Therefore, the distance between the second lens and the final image will also be i.

Using the thin lens equation for the second lens, we can relate the distance between the second lens and the final image (i) with the distance between the two lenses (d):

1/f = 1/i - 1/d

where f is the focal length of the lenses.

Substituting the value of i from the first equation into the second equation and solving for d and

Plugging in the values f = 15cm and i = 20.8cm, we can find that the separation between the two lenses is 2.2cm.

Therefore, the final setup would have the first lens placed 19.0cm to the left of the original object, the second lens placed 2.2cm to the right of the first lens, and the final image located 20.8cm to the right of the second lens.

To learn more about converging lens click brainly.com/question/15123066

#SPJ11

The frequency of the third harmonic of an organ pipe open at both ends with a length of 0.80 m and a velocity of sound in air of 340 m/s is 850 Hz. The correct option is C.

For an organ pipe open at both ends, the frequency of the harmonics can be determined using the formula:

fₙ = (nv) / (2L)

where fₙ is the frequency of the nth harmonic, n is the harmonic number, v is the velocity of sound, and L is the length of the pipe.

In this case, we want to find the frequency of the third harmonic, so n = 3. The length of the pipe is given as 0.80 m, and the velocity of sound in air is 340 m/s.

Substituting these values into the formula, we have:

f₃ = (3 * 340 m/s) / (2 * 0.80 m)

Calculating this expression gives us:

f₃ = 850 Hz

Therefore, the frequency of the third harmonic of the organ pipe is 850 Hz. Option C is correct one.

To know more about harmonics refer here:

https://brainly.com/question/28217835#

#SPJ11

Complete Question:

Moving to another question will save this response. uestion 13 An organ pipe open at both ends has a length of 0.80 m. If the velocity of sound in air is 340 mv's what is the frequency of the third harmonic of this pipe O 425 Hz O 638 Hz O 850 Hz 213 Hz

Electrical charges and magnetic poles have many similarities, one of them is opposite electrical charges attract.

The similarities between electrical charges and magnetic poles:

1. Attraction and Repulsion: Both electrical charges and magnetic poles exhibit attraction and repulsion. Like charges repel each other, and opposite charges attract each other. Similarly, like magnetic poles repel each other, and opposite magnetic poles attract each other. This behavior is governed by the fundamental forces of electromagnetism.

2. Field Lines: Both electrical charges and magnetic poles generate fields around them. Electric charges create electric fields, while magnetic poles create magnetic fields. These fields can be visualized using field lines. The field lines originate from positive charges or north magnetic poles and terminate on negative charges or south magnetic poles. The direction of the field lines indicates the direction of the force experienced by another charge or pole placed in the field.

3. Induction: Both electrical charges and magnetic poles can induce opposite charges or poles in nearby objects. For example, an electrically charged object can induce an opposite charge on a neutral object through the process of electrical induction. Similarly, a magnetic pole can induce an opposite magnetic pole in a nearby ferromagnetic material, leading to magnetization.

4. Conservation: In both cases, the total amount of charge or magnetic pole remains conserved in isolated systems. Charges are conserved in electrical systems, meaning that the total charge before and after any process remains constant. Similarly, magnetic poles are conserved in magnetic systems.

5. Force and Energy: Both electrical charges and magnetic poles can exert forces on each other. The force between charges is given by Coulomb's Law, while the force between magnetic poles is described by the Lorentz force equation. Additionally, both charges and poles can store potential energy in their respective fields.

It is important to note that while there are similarities between electrical charges and magnetic poles, there are also significant differences between the two. Electrical charges involve the interaction of positive and negative charges, while magnetic poles involve the interaction of north and south poles. The fundamental laws and principles governing electrical and magnetic phenomena are distinct.

Hence, Electrical charges and magnetic poles have many similarities, one of them is opposite electrical charges attract.

To know more about Electrical charges here

https://brainly.com/question/28457915

#SPJ4

Electrical charges and magnetic poles have many similarities, one of them is that opposite magnetic poles attract.

When it comes to magnets, the north pole and south pole are similar to positive and negative electrical charges. In both cases, opposite poles or charges are attracted to one another, while like poles or charges repel each other.There is no way that a magnetic pole can create magnetic poles in other materials.

A magnetic pole is a point on the magnet where the magnetic field lines converge. A magnetic field is created when there is a flow of current. The magnetic field is produced by the flow of current in a wire or other conductor. If a magnet is brought near a conductor, the magnet can induce a current in the conductor and create a magnetic field. But the magnet itself cannot create magnetic poles in other materials. Similarly, a magnetic pole cannot be created by a magnetic field or an electrical charge. A magnetic pole is a fundamental property of a magnet and cannot be created or destroyed.

Therefore, the statement that "one magnetic pole cannot create magnetic poles in other materials" is correct.

Learn more about magnets

https://brainly.com/question/21974887

#SPJ11

a. The proposed reaction is possible: p + p → p + p + n + n.  The minimum kinetic energy required for the colliding protons is equal to 2 times the rest mass energy of a neutron (2mn c^2).

In this reaction, the charge, angular momentum, and baryon number are conserved. The total charge on both sides of the reaction remains the same (2 protons on each side), the total angular momentum is conserved, and the total baryon number is conserved (2 protons on each side and 2 neutrons on the product side).

To calculate the minimum kinetic energy required for this reaction, we need to consider the energy-mass equivalence given by Einstein's equation E = mc^2, where E is the energy, m is the mass, and c is the speed of light.

The difference in mass between the initial state (2 protons) and the final state (2 protons and 2 neutrons) will give us the mass that needs to be converted. Using the mass of a proton (mp) and the mass of a neutron (mn), we can calculate:

Δm = (2mp + 2mn) - (2mp) = 2mn

To convert this mass difference into energy, we multiply it by the square of the speed of light (c^2):

ΔE = Δm c^2 = 2mn c^2

Therefore, the minimum kinetic energy required for the colliding protons is equal to 2 times the rest mass energy of a neutron (2mn c^2). The specific numerical value depends on the rest mass of the neutron and the speed of light.

To learn more about kinetic energy click here

https://brainly.com/question/999862

#SPJ11

100 alpha particles were released from rest near the surface of an Fm nucleus, the kinetic energy of the alpha particle when it is far away is 400 MeV.

The initial potential energy (Ei) of an alpha particle is equal to the potential energy at a distance of 10-15 m (1 fermi or Fm) from the center of an Fm nucleus, which is given by Ei = 100 × 4.0 MeV = 400 MeV. The final kinetic energy of the alpha particle (Ef), when it is far away, is equal to the total energy E = Ei = Ef. Thus, the kinetic energy of the alpha particle when it is far away is 400 MeV.

Potential energy (Ei) of an alpha particle = 100 x 4.0 MeV = 400 MeV

The final kinetic energy of the alpha particle (Ef), when it is far away, is equal to the total energy

E = Ei = Ef.Ef = Ei

Ef = 400 MeV

You can learn more about kinetic energy at: brainly.com/question/999862

#SPJ11

Resistance (R) = 12.87 Ω

Inductance (L) = 35 mH (or 0.000035 H)

a. Phasor diagram of the circuit is given below:b. The two circuit elements are connected are inductance (L) and resistance (R).

In a purely inductive circuit, voltage and current are out of phase with each other by 90°. In a purely resistive circuit, voltage and current are in phase with each other. Hence, by comparing the phase difference between voltage and current, we can determine that the circuit contains inductance (L) and resistance (R).

c. We know that;

Maximum voltage (V) = 175 VMaximum current (I) = 13.6

APhase angle (θ) = 37°

We can find out the Impedance (Z) of the circuit by using the below relation;

Impedance (Z) = V / IZ = 175 / 13.6Z = 12.868 Ω

Now, we can find out the values of resistance (R) and inductance (L) using the below relations;

Z = R + XL

Here, XL = 2πfL

Where f = 90 Hz

Therefore,

XL = 2π × 90 × LXL = 565.49 LΩ

Z = R + XL12.868 Ω = R + 565.49 LΩ

Maximum current (I) = 13.6 A,

so we can calculate the maximum value of R and L using the below relations;

V = IZ175 = 13.6 × R

Max R = 175 / 13.6

Max R = 12.87 Ω

We can calculate L by substituting the value of R

Max L = (12.868 − 12.87) / 565.49

Max L = 0.000035 H = 35 mH

Therefore, the two circuit elements are;

Resistance (R) = 12.87 Ω

Inductance (L) = 35 mH (or 0.000035 H)

learn more about Resistance on:

https://brainly.com/question/28135236

#SPJ11

To determine the acceleration vector just after the rock is launched, we need to separate the acceleration into its x-component and y-component.

Here, acceleration due to gravity is approximately 9.8 m/s² downward, we can determine the x- and y-components of the acceleration vector as follows:

x-component: The horizontal acceleration remains constant and equal to 0 m/s² since there is no acceleration in the horizontal direction (assuming no air resistance).

y-component: The vertical acceleration is influenced by gravity, which acts downward. The y-component of the acceleration is given by:

ay = -9.8 m/s²

Therefore, the acceleration vector just after the rock is launched is:

(0 m/s², -9.8 m/s²)

https://brainly.com/question/30899320

#SPJ11

The repulsion force between the two Arkon nuclei when the distance between them is 1x10⁻³μm is approximately 7.4x10⁻¹⁴N. The correct option is d. 7.4x10⁻¹⁴N.

The formula for repulsion force between two Arkon nuclei when the distance between them is given by Coulomb's law. Coulomb's law states that the force between two point charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them. Mathematically, the law can be expressed as F=kq1q2/r²,

Where F is the force, q1 and q2 are the charges, r is the distance between the charges, and k is the Coulomb's constant.The electric charge of one electron is 1.6x10⁻¹⁹C.

Therefore, the charge of the Arkon nucleus with 18 protons = 18(1.6x10⁻¹⁹) C = 2.88x10⁻₈⁸ CThe force between the two Arkon nuclei can be calculated using the formula above.

F=kq1q2/r²

Substituting the values we have;F = (9x10⁹)(2.88x10⁻¹⁸ C)2/(1x10⁻³ m)2F ≈ 7.4x10⁻¹⁴ N. Therefore, the repulsion force between the two Arkon nuclei when the distance between them is 1x10-3μm is approximately 7.4x10⁻¹⁴N. The correct option is d. 7.4x10⁻¹⁴N.

Learn more about repulsion force:

https://brainly.com/question/28439369

#SPJ11

The linear momentum acquired by the proton is 2.75 x 10^(-21) kg·m/s. The radius of the circle along which the proton moves is 3.92 x 10^(-2) meters.

To calculate the linear momentum acquired by the proton, we can use the formula P = mv, where m is the mass of the proton and v is its final velocity. The potential difference provides the energy to accelerate the proton, and using the equation eV = (1/2)mv^2, we can solve for v to find the final velocity. Plugging in the given values and solving for v, we get v = 9.19 x 10^6 m/s. Substituting this value into the linear momentum equation, we find P = 2.75 x 10^(-21) kg·m/s.

For the motion of the proton in the magnetic field, we can use the equation F = QvB, where F is the magnetic force, Q is the charge of the proton, v is its velocity, and B is the magnetic field strength. Since the magnetic force is always perpendicular to the velocity, it causes the proton to move in a circular path. The magnitude of the magnetic force is equal to the centripetal force, given by F = mv^2/R, where R is the radius of the circular path. Equating the two force equations and solving for R, we find R = mv / (Q B). Plugging in the given values, we get R = 3.92 x 10^(-2) meters.

To learn more about linear momentum click here:

brainly.com/question/30767107?

#SPJ11

In a diode, the reverse current is of the order of microamperes (μA).

A diode is a two-terminal device with a p-n junction that enables current to flow in only one direction. When the diode is forward biased, current flows through it, and when it is reverse biased, it blocks the flow of current. A diode conducts current in only one direction due to the p-n junction, which enables the flow of current in one direction and blocks it in the opposite direction.

When a positive voltage is applied to the anode and a negative voltage to the cathode, the diode conducts current easily. However, if the voltage polarity is reversed, the diode is in reverse bias, and the current flow is blocked or minimized. This condition is called reverse current. As a result, the diode only conducts in one direction.

To know more about microamperes:

https://brainly.com/question/13199730

#SPJ11

The age of the old wooden bowl is about 2181.8 years.

The age of the old wooden bowl can be determined by using the following equation:

[tex]\[N=N_{0}\left(\frac{1}{2}\right)^{t/T}\][/tex]

where N is the amount of carbon-14 present in the old wooden bowl, N₀ is the amount of carbon-14 in fresh wood, t is the age of the old wooden bowl and T is the half-life of carbon-14.

We know that the half-life of carbon-14 is 5730 years. The old wooden bowl has one-third of the amount of carbon-14 present in fresh wood.

This means that the amount of carbon-14 in the old wooden bowl is given by

[tex]\[N=\frac{1}{3}N_{0}\][/tex]

[tex]\[\frac{1}{3}N_{0}=N_{0}\left(\frac{1}{2}\right)^{t/T}\] \[\log_{2}\left(\frac{1}{3}\right)=\frac{t}{T}\log_{2}\left(\frac{1}{2}\right)\] \[t=\frac{T}{\log_{2}(3)-\log_{2}(2)}\log_{2}\left(\frac{1}{3}\right)\]\[t=\frac{5730}{\log_{2}(3)-1}\log_{2}\left(\frac{1}{3}\right)\][/tex]

The half-life of the carbon-14 atom is 5730 years. An old wooden bowl unearthed in an archaeological dig is found to have one-third of the amount of carbon-14 present in a similar sample of fresh wood. The age of the old wooden bowl can be determined by using the following equation:

[tex]\[N=N_{0}\left(\frac{1}{2}\right)^{t/T}\][/tex]

where N is the amount of carbon-14 present in the old wooden bowl, N₀ is the amount of carbon-14 in fresh wood, t is the age of the old wooden bowl and T is the half-life of carbon-14. We know that the half-life of carbon-14 is 5730 years. The old wooden bowl has one-third of the amount of carbon-14 present in fresh wood. This means that the amount of carbon-14 in the old wooden bowl is given by

[tex]\[N=\frac{1}{3}N_{0}\][/tex]

Substituting the values in the equation, we get:

[tex]\[\frac{1}{3}N_{0}=N_{0}\left(\frac{1}{2}\right)^{t/T}\][/tex]

Taking logarithm to base 2 on both sides, we get:

[tex]\[\log_{2}\left(\frac{1}{3}\right)=\frac{t}{T}\log_{2}\left(\frac{1}{2}\right)\][/tex]

Simplifying the expression, we get:

[tex]\[t=\frac{T}{\log_{2}(3)-\log_{2}(2)}\log_{2}\left(\frac{1}{3}\right)\][/tex]

Substituting the values, we get:

[tex]\[t=\frac{5730}{\log_{2}(3)-1}\log_{2}\left(\frac{1}{3}\right)\][/tex]

Therefore, the age of the old wooden bowl is about 2181.8 years.

To know more about archaeological dig visit

brainly.com/question/30790622

#SPJ11