Answer:
No it will not make to the top of the hill
Explanation:
From the question we are told that
The velocity is [tex]v = 4 \ m/s[/tex]
The height of the hill is [tex]h = 1 \ m[/tex]
Generally from the law of energy conservation we have that
The kinetic energy of the pluck at the level position = The potential energy of the pluck at the maximum height the pluck can get to
So
[tex]\frac{1}{2} * m * v^2 = m * g * h_{max}[/tex]
=> [tex]\frac{1}{2} * v^2 = g * h_{max}[/tex]
=> [tex]h_{max} = \frac{0.5 * v^2}{g}[/tex]
=> [tex]h_{max} = 0.8163 \ m[/tex]
Given that the maximum height which the pluck can get to at this speed given in the question is less than the height of the hill then conclusion will be that the pluck will not make it to the top of the hill
The picture shows a basic diagram of an electric motor. At top left a piece of magnet labeled N and at top right a piece labeled S. Between these a square coil of wire X sits attached to a metal rod, which runs between the 2 pieces of magnet. 2 semicircular pieces Z of metal surround the rod at its opposite end from the pieces of magnet. Wires connect to each semicircular piece at terminals Y to one pole of a battery. Blue arrows superimposed on the end of the coil away from the magnets point toward S and away from N. Which labels best complete the diagram? X: Brush Y: Armature Z: Commutator X: Commutator Y: Brush Z: Armature X: Armature Y: Commutator Z: Brush X: Armature Y: Brush Z: Commutator Mark this and return
Answer:
I know this isn't much help but its not B
Explanation:
Answer:
D
Explanation:
After a collision between two different massed objects; the larger objects accelerate at a faster rate than the smaller object? If false please explain
why
Answer: Things continue doing what they are doing unless a force is applied to it. Objects have a natural tendency to resist change. This is INERTIA. Heavier objects (objects with more mass) are more difficult to move and stop. Heavier objects (greater mass) resist change more than lighter objects, so true
Explanation:
Pushing a bicycle or a Cadillac, or stopping them once moving. The more massive the object (more inertia) the harder it is to start or stop. The Cadillac has more of a tendency to stay stationary (or continue moving), and resist a change in motion than a bicycle.
Do scientific theories have math in them?
Answer:
Yes of course science has maths
(PLEASE HELP ASAP) Which chemical equation models the law of conservation of mass?
Answer:
B.) 3KOH + H3PO4 -> K3PO4 +3H20
Explanation:
:p
Chemical equation models the law of conservation of mass is [tex]3KOH + H_{3} PO_{4}[/tex] → [tex]K_{3} PO_{4} + 3H_{2} O[/tex].
What is Chemical equation?A chemical equation would be a symbol and formula-based symbolic formulation of a chemical reaction.
What is law of conservation of mass?For every system that is closed across all exchanges of matter including energy, the law of conservation of mass, also known as the theory of mass conservation.
The equation [tex]3KOH + H_{3} PO_{4}[/tex] → [tex]K_{3} PO_{4} + 3H_{2} O[/tex]. is balanced hence, it will follow mass of conservation law.
Therefore, the correct answer will be option (B).
To know more about law of conservation of mass and Chemical equation
https://brainly.com/question/13383562
#SPJ3
A solenoid 30 cm long is wound with 250 turns of wire. The cross-sectional area of the coil is 3.5 cm^2. What is the self-inductance of the solenoid?
Answer:
The value is [tex]L = 9.164 *10^{-5} \ H[/tex]
Explanation:
From the question we are told that
The length of the solenoid is [tex]l = 30 \ cm = 0.3 \ m[/tex]
The number of turns is [tex]N = 250 \ turns[/tex]
The cross-sectional area is [tex]A = 3.5 \ cm^2 = 3.5 *10^{-4} \ m^2[/tex]
Generally the self inductance of the solenoid is
[tex]L = \frac{\mu_o * N^2 * A }{ l }[/tex]
Here [tex]\mu_o[/tex] is the permeability of free space with value [tex]\mu_o = 4\pi *10^{-7} \ T \cdot m/A[/tex]
So
[tex]L = \frac{ 4 \pi*0^{-7} * 250^2 * 3.5 *10^{-4} }{ 0.3 }[/tex]
=> [tex]L = 9.164 *10^{-5} \ H[/tex]
Question 18 of 20
Which situation results in the least attraction between two magnets?
A. The south pole of one magnet is near the south pole of the other
magnet
B. The north pole of one magnet is near the south pole of the other
magnet
C. The north pole of one magnet is far away from the north pole of
the other magnet
D. The north pole of one magnet is far away from the south pole of
the other magnet.
Answer:D
Explanation:
Answer:
Explanation: the answer is D.
Which two statements correctly describe the role of a semiconductor in a
solar cell?
I A. When the semiconductors become charged, current flows from
the negative one to the positive one.
B. The electrons freed from the semiconductors by light exit the cell
and never return.
I C. When photons are absorbed, electrons from the semiconductor
are freed because of the photoelectric effect.
D. When the semiconductors become charged, current flows from
the positive one to the negative one.
Answer:
It's A and C
Options A and C are correct.
A. When the semiconductors become charged, current flows from the negative one to the positive one
C. When photons are absorbed, electrons from the semiconductor are freed because of the photoelectric effect.
What are semiconductors?Semiconductors are materials with conductivity intermediate between conductors and nonconductors or insulators. Semiconductors may be either compound like gallium arsenide.
(A)When the semiconductors become charged, current flows from the negative one to the positive one
Reason: Current flow in a semiconductor is caused by charge carrier migration in both the conduction and valence bands.
Electrons are mobile charges in the conduction band while holes are mobile charges in the valence band. Drift current occurs in the presence of an electric field,
which creates a net motion of positively charged carriers in the same direction as the field and negatively charged carriers in the opposite direction as a result of the force.
(C)When photons are absorbed, electrons from the semiconductor are free because of the photoelectric effect.
Reason: The photoelectric effect is the creation of a current when the light of a specific frequency strikes a surface, which is commonly metallic or semiconducting.
The current is produced when electrons are jolted out of their stable states by the energy transferred from an incoming photon.
The minimum frequency or energy need indicates the varying energy necessary to release an electron from a specific surface, which varies depending on the atomic configuration of the material.
The outermost electrons in metals are not bonded to each atom which is shared by many atoms. This decentralization is what allows metals to conduct electric currents.
Hence options A and C are correct.
To learn more about the semiconductors refer to the link;
https://brainly.com/question/1476674
The specific heat of aluminum is 0.90 J/gC . How much heat is given off when 25 grams of aluminum is cooled from 55 C to 25 C?
Answer:
2. How many joules of heat are needed to raise the temperature of 10.0 g of aluminum from 22°C to 55°C, if the specific heat of aluminum is 0.90 J/gºC? c=0.90J/g. 9 (2 sigs.)
Explanation:
An orange of mass m falls into a wagon. Assume the orange experiences upward acceleration magnitude a when it comes in contact with the wagon. What is the correct expression for the normal force magnitude F, exerted on the orange?
What is the correct expression for the normal force magnitude Fr exerted on the orange?
Consider upward as the positive direction.
Fn = m(a -g)
Fn = m(a +g)
Fn=a +g /m
Fn= m/a+g
Answer:
Explanation:
Fn = m(a + g)
Only four forces act on an object. They all have the same magnitude. Their directions are north, south, northwest, and northeast. In which direction does the object accelerate? (A) north (B) south (C) northwest (D) northeast (E) The object does not accelerate because the four forces cancel.
Answer:
the correct answer is A, North
Explanation:
The forces are vectors so they must be added vectorially.
The magnitude of the forces is the same, but not their direction, which is why they are different.
Analyze the situation presented
We have a force towards the North and another towards the South with the same magnitude, therefore these cancel each other out
We have a force towards the Northeast and another towards the Northwest, these can be decomposed into parts, one towards the North and another on the East-West axis, this last component is canceled, but the component towards the North is added.
In summary we see that the body accelerates towards the North
the correct answer is A
The is the sac-like structure that holds the testes.
Answer:
Scrotum
Explanation:
Answer: Scrotum
Explanation: edge
which of the following is not a risk associated with using legal drugs without medical supervision
Answer:
paying too much on the black market instead of getting a prescription
Explanation:
i just took the quiz
Answer:
Paying too much on the black market instead of getting a prescription
Explanation:
The rest of the options are risks associated with using legal drugs without medical supervision.
1) Determine the magnitude of energy for each of the blanks on the diagram. Give the correct values for 1A, 1B, and 1C.
2)Explain how the energy transformations follow the Law of Conservation of energy throughout the skier's path. Must answer in complete sentences.
3)Explain how the situation shown above would be different if the skier experiences friction while traveling downhill. Include the terms kinetic energy, heat energy, mechanical energy, total energy and friction. Must answer in complete sentences.
Answer:
Explanation: y’all taking the same test as me hahahahah I got the answers but I can’t attach the picture here so hit me up on snap daniela_0789
The total energy at each point in the path of the skier is constant as the
skier travels down the slope.
1) 1A P.E. = 15,000 J, 1B K.E. = 19,000 J, 1C, P.E. = 0 J2) The mechanical energy of the system is constant3) Energy is given off as heat due to friction such that the total energy of the system is not conserved if friction is experiencedReasons:
1) Given that the total mechanical energy, M.E. is constant, we have;
M.E. = Kinetic Energy, K.E. + Potential Energy, P.E. = Constant
M.E. = K.E. + P.E.
At the start, we have;
P.E. = 25,000 J
K.E. = 0 J
Therefore;
M.E. = 25,000 J + 0 J = 25,000 J
At point 1A, we have, K.E = 10,000 J
P.E. = M.E. - K.E.
Therefore;
P.E. = 25,000 - 10,000 = 15,000
The potential energy at point 1A, P.E. = 15,000 J
At point 1B, we have; PE = 6000 J
K.E. = M.E. - P.E.
Therefore;
K.E. = 25,000 J - 6,000 J = 19,000 J
At 1B, K.E. = 19,000 J
At point 1C, we have; K.E. = 25,000 J
Therefore;
P.E. = 25,000 J - 25,000 J = 0 J
At 1C P.E. = 0 J
2) The Law of Conservation of Energy states that the energy in a closed
system is constant.
The energy transformation follows the Law of Conservation of energy
given that the total mechanical energy is constant at all points along the
path.
3) The energy of a system is not conserved when a external force is
applied.
If the skier experiences friction, the force of friction does work to reduce
the speed of the skier, thereby reducing the kinetic energy at a point
downslope, where the potential energy has already been reduced,
resulting in an reduction in the mechanical energy of the system.
Therefore, if the skier experiences friction, the total energy of the system is
not conserved, as energy will be consumed in the work done by friction
which is converted to heat and sound energies.
Learn more about the Law of Conservation of Energy here:
https://brainly.com/question/2950237
SOMEBODY ONCE TOLD ME THE WORLD WAS GONNA ROLL ME
I AIN'T THE SHARPEST TOOL IN THE SHED~
SHE WAS LOOKING KINDA DUM WITH HER FINGER AND HER THUMB
IN THE SHAPE OF AN "L" ON HER FOREHEAD~
WELL THE YEARS START COMING AND THEY DON'T STOP COMING
FED TO THE RULES AND I HIT THE GROUND RUNNING
DIDN'T MAKE SENSE NOT TO LIVE FOR FUN
YOUR BRAIN GETS SMART BUT YOUR HEAD GETS DUM
SO MUCH TO DO, SO MUCH TO SEE--
SO WHATS WRONG WITH TAKING THE BACKSTREETS?
YOU'LL NEVER KNOW IF YOU DON'T GO
YOU'LL NEVER SHINE IF YOU DON'T GLOW.
Answer:
shrek
Explanation:
allstar
A car is stopped for a traffic signal. When the light turns green, the car accelerates, increasing its speed from 0 to 5.40 m/s in 0.792 s. What are:______
a. the magnitudes of the linear impulse
b. the average total force experienced by a 70.0-kg passenger in the car during the time the car accelerates?
Answer:
a) 378Ns
b) 477.27N
Explanation:
Impulse is the defined as the product of the applied force and time taken. This is expressed according to the formula
I = Ft = m(v-u)
m is the mass = 70kg
v is the final velocity = 5.4m/s
u is the initial velocity = 0m/s
Get the impulse
I = m(v-u)
I = 70(5.4-0)
I = 70(5.4)
I = 378Ns
b) Average total force is expressed as
F = ma (Newton's second law)
F = m(v-u)/t
F = 378/0.792
F = 477.27N
Hence the average total force experienced by a 70.0-kg passenger in the car during the time the car accelerates is 477.27N
Three wheels each of radius 1 have their centers at respective verticies of an equilateral triangle of side length 4. A belt is wrapped continuously around the wheels. Find the length of the belt.
Answer:
L = 6 * ( π + 1 )
Explanation:
The side of the equilateral triangle is 4, and each one of the circles is of radius 1. Then
Triangle vertex A B and C
Trajectory of the belt, beginning in vertex A
1.-First circle A one turn
L₁ = 2*π*1 = 2*π
2.-Length between the circle A and B
L₂ = 2
3.- To wrap this circle we need to wrap the circle and to run the belt through the radius twice. The firs over the side AB and the second over the side BC, therefore
L₃ = 2*π*1 + 2*(1)
L₃ = 2*π + 2
4.-Length between two nearest points of circles B and C is 2 and length of the circle in C is 2*π*1. Then
L₄ = 2 + 2*π
Total length of the belt is:
L = L₁ + L₂ + L₃ + L₄
L = 2*π + 2 + (2*π + 2 ) + ( 2 + 2*π )
L = 6*π + 6
L = 6 * ( π + 1 )
In a perfectly inelastic one-dimensional collision between two objects, what initial condition alone is necessary so that all of the original kinetic energy of the system is gone after the collision
Answer:
The objects must have moments with the same magnitude but opposite directions.
Explanation:
The condition alone that is necessary in order to make the final kinetic energy of the system to be zero after the collision is that the objects must have moments that are the same in magnitude but have opposite directions.
How could girls improve their communication skills
Answer:
////??????????????/
Explanation:
Answer:
As you go talk to her or even before you go talk to her. If that's the case however, start talking to everyone you meet both boys and girls. See, improving your communication with women is easy. Just get a few books on social skills and then go over to talk to all the ladies you see without any hidden agenda.
Explanation:
I really hope this helps your question ^_^
in how many days the life cycle of honeybee complete
baseball player hits a line drive estimated to have traveled 145 meters the ball leaves the bat with a horizontal velocity of 40.0 m/s . how much time was the ball in the air
Answer:
3.63 s
Explanation:
Since distance d = vt where v = velocity and t = time taken to cover the distance.
Now, the baseball traveled a distance of d = 145 m with a horizontal velocity of 40.0 m/s.
So, making t subject of the formula,
t = d/v
Substituting the values of d and v we have
t = 145 m/40.0 m/s
= 3.625 s
≅ 3.63 s
So the time the ball was in the air is 3.63 s
Problem 4: For a conservative force,esvoedca2beee49af123450c68a7237065a45ad885a4229cb932c3697d0b27c6328eaeovse 0N86-C1-52-40-A837-22820 If you push a wooden crate across rough ground with a force F over a distance d, what is the potential energy stored in the system due to this force
Answer:
PE = Fd
Explanation:
Potential energy is the energy possessed by a body by virtue of its position. It is expressed mathematically as:
PE = mgd
m is the mass
g is the acceleration due to gravity
d is the distance
Since Force F is expressed as the product of mass and acceleration due to gravity then, F = mg
Substitute into the formula above:
Recall that: PE = mgd
Since F = mg
PE = Fd
Hence the required expression is PE = Fd
A tennis ball (m=0.060 kg) is moving horizontally at 20 m/s toward a tennis player who hits it straight back at 26 m/s. What is the change in momentum (in kg m/s) delivered to the tennis ball? 20 m/s 26 m/s
A. 0.36
B. 12.2
C. 1.84
D. 2.76
Answer:
0.36 kg-m/s
Explanation:
Given that,
Mass of a ball, m = 0.06 kg
Initial velocity of the ball, u = 20 m/s
Final velocity of the ball, v = 26 m/s
We need to find the change in momentum of the tennis ball. It is equal to the final momentum minus initial momentum
[tex]\Delta p=m(v-u)\\\\=0.06\times (26-20)\\\\=0.36\ kg-m/s[/tex]
So, the change in momentum of the ball is 0.36 kg-m/s.
1. Add 17.35 g, 25.6 g and 8.498 g. chaper 1 physical quantity 11class .physic
51.448 g is the required answer!
An object is moving with constant speed in a
circular path. The object's centripetal
acceleration remains constant in
(1) magnitude, only
(2) direction, only
(3) both magnitude and direction
(4) neither magnitude nor direction
Answer:
both magnitude and direction
Explanation:
When an object moves in a circular path, its motion is called uniform circular motion. In this motion, the force acting on it is centripetal force and it is moving under centripetal acceleration. This type of force acts towards the centre of the circle.
In this type of motion, the speed remains constant while the velocity keeps on changing. The object's centripetal acceleration remains constant in magnitude as well as direction.
Hence, the correct option is (3).
If an object is moving with constant speed in the circular path the object's centripetal acceleration remains constant in both magnitude and direction
The formula for calculating the centripetal acceleration of an object is expressed as:
[tex]a =\frac{v^2}{r}[/tex]
v is the speed of the objectr is the radius of the circular pathIf the speed of the object is constant, the acceleration is of the body is also constant.Hence if an object is moving with constant speed in the circular path the object's centripetal acceleration remains constant in both magnitude and direction
Learn more on centripetal acceleration here: https://brainly.com/question/79801
A bicyclist travels $4.5\text{ km}$ west, then travels $6.7\text{ km}$ at an angle $27.0^\circ$ South of West.
What is the magnitude of the bicyclist's total displacement?
Answer:
10.88 km
Explanation:
We shall represent displacement in terms of i , j unit vectors in the direction of east and north .
4.5 km due west
D₁ = - 4.5 i
6.7 km at an angle of 27° south of west
D₂ = - 6.7 cos27 i - 6.7 sin27j
= - 6.7 x .89 i - 6.7 x .45 j
= - 5.96i - 3 j
Total displacement
= D₁ + D₂
= - 4.5 i - 5.96i - 3 j
= -10.46 i - 3j
Magnitude = √ ( 10.46² + 3²)
= √ ( 109.41 + 9)
= √ 118.41
= 10.88 km .
When gasoline is burned, it gives off 46,000 J/gram of heat energy. If an automobile uses 13.0 kg of gasoline per hour with an efficiency of 21%, what is the average horsepower output of the engine
Answer:
The correct output will be "46.76 h.p.".
Explanation:
The given values are:
Gasoline's energy content,
= 46000 J/g
= 4.6 x10⁷ J/kg
Fuel usage,
= 13 kg/h
= [tex]\frac{13}{3600} \ kg/s[/tex]
Fuel efficiency,
= 21%
= 0.21
Now,
The average output will be:
= [tex](Energy \ content \ of \ gasoline)\times (fuel \ usage)\times (fuel \ efficiency)[/tex]
On substituting the values, we get
= [tex]4.6\times 10^7\times (\frac{13}{3600} )\times 0.21\times (\frac{1}{746}) h.p.[/tex]
= [tex]46.76 \ h.p.[/tex]
Answer:
the average horsepower output of the engine is 46.76 hp
Explanation:
The computation of the average horsepower output of the engine is shown below
The output of the engine is
= (Energy content of gasoline) × (usage of the fuel ) × (Fuel efficiency)
As we know that
1 hp = 746 W
where,
Energy content of gasoline = 46000 J / g = 4.6 × 107 J/kg
Usage of the fuel = 13 kg / h = 13 ÷ 3600 kg/s
Fuel efficiency = 21% = 0.21
Therefore, the output of the engine is
= 4.6 × 107 × (13 ÷ 3600) × 0.21 × (1 ÷ 746) h.p.
= 46.76 h.p.
hence, the average horsepower output of the engine is 46.76 hp
If the interest of sum of money is 6 yrs in 3/8 of the principal . what is the rate of interest?
Answer:
=6.25%
Explanation:
Simple interest can be calculated using the below formula
I=prt/100
=Interest
P=Principal
R=Rate
T=Time
T=6 yrs
R=3/8
Making R subject of the formula
R=(I ×100)/PT
Substitute the values
=(3/2 P×100)/P×6
The "P" in the numerator cancelled out the "P" in denominator then we have
=(3/2×100)/6
=6.25%
Hence the rate is 6.25%
An investigation has been completed similar to the one on latent heat of fusion, where steam is bubbled through a container of water. Steam condenses and the lost energy heats the water and container. Use the following data to answer the question below:
Mass of the aluminum container 50 g
Mass of the container and water 250 g
Mass of the water 200 g
Initial temperature of the container and water 20°C
Temperature of the steam 100°C
Final temperature of the container, water, and condensed steam 50°C
Mass of the container, water, and condensed steam 261 g
Mass of the steam 11 g Specific heat of aluminum 0.22 cal/g°C
Given the data above, determine the total heat energy gained by the container and water.
Answer:
[tex]Q_a=330 cal[/tex]
[tex]Q_w=6000cal[/tex]
Explanation:
From the question we are told that
Mass of the aluminum container 50 g
Mass of the container and water 250 g
Mass of the water 200 g
Initial temperature of the container and water 20°C
Temperature of the steam 100°C
Final temperature of the container, water, and condensed steam 50°C
Mass of the container, water, and condensed steam 261 g
Mass of the steam 11 g Specific heat of aluminum 0.22 cal/g°C
a) Heat energy on container
Generally the formula for mathematically solving heat gain
[tex]Q_c=M_c *C_c*( \triangle T)[/tex]
Therefore imputing variables we have
[tex]Q_a=50g *0.22*50-20[/tex]
[tex]Q_a=330 cal[/tex]
b) Heat energy on water
Generally the formula for mathematically solving heat gain
[tex]Q_w=M_w *C_w*( \triangle T)[/tex]
Therefore imputing variables we have
[tex]Q_w=200 *1* 50-204[/tex]
[tex]Q_w=6000cal[/tex]
What is the main organ of the circulatory system?
veins
arteries
heart
capillaries
It is the heart
if not im sorry
A 6 kg bowling ball is on top of a building. It has 2,352 J of potential energy. What is the height of
the building?
Hello!
[tex]\large\boxed{ h = 40m}[/tex]
Use the formula below to solve:
[tex]\text{ Potential energy} = mgh[/tex]
Where:
m = mass of object (kg)
g = acceleration due to gravity (9.8 m/s²)
h = height of the building (m)
We are given the potential energy, mass, and gravity, so plug in those values into the equation to solve for the height:
[tex]2352 = 6 * 9.8 * h\\\\2352 = 58.8h\\\\2352/58.8 = 58.8h / 58.8\\\\h = 40 m[/tex]