For most people, cost is the #1 concern and they cannot really afford to pay a premium for a heat pump or a premium for heating their homes using electricity instead of gas. What do you think governments or people can do about that to try to limit our emissions without passing the cost to the public?

Rotational inertia, commonly referred to as moments of inertia, is a feature of an object that governs how resistant it is to changes in rotational motion.

Here are the given items in terms of moments of inertia from least to greatest:

Moment of inertia of Thin Rod (End) 1=MR²

Moment of inertia of Thin Rod (Center) 1=MR²

Moment of inertia of Solid Sphere 1=3MR²

Moment of inertia of Hoop 1=MR²

Moment of inertia of Solid Cylinder 1 = MR²

Moment of inertia of Thin Spherical Shell 1=MR²

Note: When the mass and radius are the same, the moment of inertia of a thin spherical shell, a solid cylinder, and a thin rod are all equal to MR², but the moment of inertia of a solid sphere is equal to 3MR².

To know more about Moments of Inertia visit:

https://brainly.com/question/30051108

#SPJ11

The average induced voltage in the loop with an area of 200 cm², positioned perpendicular to a uniform magnetic field when the field is reduced from 10T to 9T in the time interval of 0.02 s is 1 volt.

To calculate the average induced voltage (emf) in a loop is:

     e = -A * (∆B/∆t)

Where:

e is the average induced voltage (emf) in volts (V)

A is the area of the loop in square meters (m²)

∆B is the change in magnetic field strength in teslas (T)

∆t is the change in time in seconds (s)

Let's calculate the average induced voltage using the given values:

A = 200 cm²

  = 0.02 m²

∆B = 9 T - 10 T

     = -1 T

∆t = 0.02 s

e = -0.02 m² * (-1 T / 0.02 s)

  = 1 V

Therefore, the average induced voltage in the loop is 1 volt (V).

Learn more about magnetic fields here:

https://brainly.com/question/7645789

#SPJ11

The density of the cylinder is 1260 kg/m^3. None of the given options (A, B, C, or D) matches the calculated density. It seems there might be an error in the provided options.

To determine the density of the cylinder, we need to use the principle of buoyancy.

The buoyant force acting on the cylinder is equal to the weight of the fluid displaced by the submerged portion of the cylinder. The weight of the fluid displaced is given by the volume of the submerged portion multiplied by the density of the fluid.

From question:

Height of the cylinder = 7 cm

Diameter of the cylinder = 4 cm

Radius of the cylinder = diameter / 2 = 4 cm / 2 = 2 cm = 0.02 m

Height of the submerged portion = 5 cm = 0.05 m

Volume of the submerged portion = π * radius² * height = π * (0.02 m)² * 0.05 m = 0.0000628 m³

Density of glycerin (ρ) = 1260 kg/m³

Weight of the fluid displaced = volume * density = 0.0000628 m³ * 1260 kg/m³ = 0.079008 kg

Since the buoyant force equals the weight of the fluid displaced, the buoyant force acting on the cylinder is 0.079008 kg.

The weight of the cylinder is equal to the weight of the fluid displaced, so the density of the cylinder is equal to the density of glycerin.

Therefore, the density of the cylinder is 1260 kg/m³.

None of the given options (A, B, C, or D) matches the calculated density. It seems there might be an error in the provided options.

To know more about buoyant force visit:

https://brainly.com/question/11884584

#SPJ11

The angle between the two beams inside the glass for blue light is approximately 17.65°, and for red light is approximately 19.10°.

To determine the angle between the two beams inside the glass, we can use Snell's Law, which relates the angles of incidence and refraction to the indices of refraction of the two media:

n₁sinθ₁ = n₂sinθ₂

Where:

n₁ = index of refraction of the initial medium (air)

θ₁ = angle of incidence in the initial medium

n₂ = index of refraction of the final medium (glass)

θ₂ = angle of refraction in the final medium

n₁ = 1 (index of refraction of air)

n₂ (for blue light) = 1.660

n₂ (for red light) = 1.600

θ₁ = 30.0° (angle of incidence)

For blue light (wavelength = 420 nm):

n₁sinθ₁ = n₂sinθ₂

(1)(sin 30.0°) = (1.660)(sin θ₂)

Solving for θ₂, we find:

sin θ₂ = (sin 30.0°) / 1.660

θ₂ = arcsin[(sin 30.0°) / 1.660]

Using a calculator, we find:

θ₂ ≈ 17.65°

For red light (wavelength = 600 nm):

n₁sinθ₁ = n₂sinθ₂

(1)(sin 30.0°) = (1.600)(sin θ₂)

Solving for θ₂, we find:

sin θ₂ = (sin 30.0°) / 1.600

θ₂ = arcsin[(sin 30.0°) / 1.600]

Using a calculator, we find:

θ₂ ≈ 19.10°

Therefore, the angle between the two beams inside the glass for blue light is approximately 17.65°, and for red light is approximately 19.10°.

Read more about angle

brainly.com/question/13954458

#SPJ11

The charge (Q) in the capacitor can be calculated using the formula Q = C * E, where Q represents the charge, C is the capacitance, and E is the voltage across the capacitor. We get 66 uC as the charge in the capacitor by substituting the values in the given formula.

In this case, the capacitance is given as 3 mF (equivalent to 3 * 10^(-3) F), and the voltage across the capacitor is 22 V. By substituting these values into the formula, we find that the charge in the capacitor is 66 uC.

In an electrical circuit with a capacitor, the charge stored in the capacitor can be determined by multiplying the capacitance (C) by the voltage across the capacitor (E). In this scenario, the given capacitance is 3 mF, which is equivalent to 3 * 10^(-3) F. The voltage across the capacitor is stated as 22 V.

By substituting these values into the formula Q = C * E, we can calculate the charge as Q = (3 * 10^(-3) F) * 22 V, resulting in 0.066 C * V. To express the charge in micro coulombs (uC), we convert the value, resulting in 66 uC as the charge in the capacitor.

Learn more about capacitors:

brainly.com/question/31627158

#SPJ11

The mass of Neptune cannot be directly calculated from measurements of the gravitational influence of Jupiter and Saturn on Neptune's orbit around the Sun. This method, known as gravitational perturbation, is used to determine the mass of celestial objects when their gravitational effects on other objects can be measured accurately.

To calculate the mass of Neptune, astronomers primarily rely on measurements of Neptune's orbital period and its distance from the Sun. These parameters, along with Newton's laws of gravitation and motion, allow for the determination of the mass of Neptune based on its gravitational interaction with the Sun.

Other factors such as the orbital period and distance of Neptune's moon Triton from Neptune, or the masses of Neptune's moons, Triton and Nereid, are not directly used to calculate Neptune's mass.

Understanding Neptune's speed changes during its elliptical orbit around the Sun can provide valuable information about its dynamics, but it does not directly determine its mass.

Therefore, the most accurate method for calculating the mass of Neptune involves analyzing its orbital parameters in relation to the Sun and applying the laws of celestial mechanics.

To know more about gravitational perturbation, please visit

https://brainly.com/question/32925849

#SPJ11

The correct options are 1 and 4. If the amplitude of a sound wave is increased, there is an increase in the loudness of the sound, the energy of the wave.

The loudness of sound is the degree of sound volume.

Amplitude determines the amount of energy produced by sound. Hence, increasing the amplitude of a sound wave increases the loudness of the sound.

The energy of a wave is determined by the amplitude of the wave.

Therefore, when the amplitude of a wave is increased, the energy of the wave is also increased.

Hence, increasing the amplitude of a sound wave increases the energy of the wave.

The third harmonic in an open tube is a wave that is 3/2 or 1.5 wavelengths long.

Hence, the given statement is True.

To know more about amplitude visit:

https://brainly.com/question/9525052

#SPJ11

The current flowing through the loop is 0.075 Amperes or 75 milliamperes. To calculate the current flowing through the loop, we can use Ohm's law, which states:

V = I * R

Where:

V is the voltage (potential difference) across the circuit,

I am the current flowing through the circuit, and

R is the total resistance of the circuit.

In this case, the voltage (V) is given as 1.5 V, and the total resistance (R) is the sum of the resistances of the two bulbs in series, which is 10 ohms + 10 ohms = 20 ohms.

Using Ohm's law, we can rearrange the equation to solve for the current (I):

I = V / R

Substituting the given values:

I = 1.5 V / 20 ohms

I = 0.075 A

Therefore, the current flowing through the loop is 0.075 Amperes or 75 milliamperes.

Learn more about battery:
https://brainly.com/question/26466203

#SPJ11

Option c) Heat cannot be completely converted back into other forms of energy is the correct answer.

According to the 2nd Law of Thermodynamics, Heat cannot be completely converted back into other forms of energy. This law is also known as the law of entropy and states that every energy transfer or conversion increases the entropy of the universe, meaning that the disorder and randomness of the system will increase over time.

This implies that when heat is transformed into other forms of energy such as mechanical or electrical energy, some of the heat energy is lost in the conversion process and cannot be recovered.

Therefore, option c) Heat cannot be completely converted back into other forms of energy is the correct answer.

To learn more about energy visit;

https://brainly.com/question/1932868

#SPJ11

The magnitude of the constant force that accelerated the car can be calculated using the formula for linear momentum. The calculated force is 5.00 × 10^2 N. The increase in speed of the car can be determined by dividing the change in momentum by the mass of the car. The calculated increase in speed is 4.81 m/s.

The linear momentum (p) of an object is given by the formula p = mv, where m is the mass of the object and v is its velocity.

In this case, the car has a mass of 1350 kg and its linear momentum increased by 6.50 × 10³ kg m/s in a time interval of 13.0 s.

To find the magnitude of the force that accelerated the car, we use the formula F = Δp/Δt, where Δp is the change in momentum and Δt is the change in time.

Substituting the given values, we have F = (6.50 × 10³ kg m/s)/(13.0 s) = 5.00 × 10^2 N.

Therefore, the magnitude of the constant force that accelerated the car is 5.00 × 10^2 N.

To determine the increase in speed of the car, we divide the change in momentum by the mass of the car. The change in speed (Δv) is given by Δv = Δp/m.

Substituting the values, we have Δv = (6.50 × 10³ kg m/s)/(1350 kg) = 4.81 m/s.

Hence, the speed of the car increased by 4.81 m/s.

Learn more about linear momentum here:

https://brainly.com/question/30767107

#SPJ11

A net torque on an object will cause the angular acceleration to change. The correct option is B.

Torque is the rotational equivalent of force. It is a vector quantity that is defined as the product of the force applied to an object and the distance from the point of application of the force to the axis of rotation. The net torque on an object will cause the angular acceleration of the object to change.

The rotational mass of an object is the resistance of the object to changes in its angular velocity. It is a measure of the inertia of the object to rotation. The net torque on an object will not cause the rotational mass of the object to change.

Translational motion is the motion of an object in a straight line. The net torque on an object will not cause translational motion.

The angular velocity of an object is the rate of change of its angular position. The net torque on an object will cause the angular velocity of the object to change.

To learn more about angular acceleration click here

https://brainly.com/question/30237820

#SPJ11

The focal length of the ocular lens is 15 cm. It's worth noting that the focal length of a diverging lens is typically negative, indicating that the lens causes light rays to diverge.

To find the focal length of the ocular lens, we can use the lens formula, which relates the focal length (f), object distance (d_o), and image distance (d_i) of a lens:

1/f = 1/d_o + 1/d_i.

In this case, the objective lens is a converging lens with a focal length (f_o) of 15 cm, and the ocular lens is a diverging lens at a distance of 10 cm from the objective lens.

Let's assume the object distance for the objective lens (d_o) is infinity (since we are looking at a distant object). Therefore, we have:

1/f_o = 1/infinity + 1/d_i.

Since the objective lens forms a real image at the focal point of the ocular lens, the image distance for the objective lens (d_i) is the focal length of the ocular lens (f_oc).

1/15 = 1/infinity + 1/f_oc.

Now, we can solve for the focal length of the ocular lens (f_oc).

1/f_oc = 1/15.

f_oc = 15 cm.

However, in this case, we are only concerned with the magnitude of the focal length, so the negative sign is not relevant.

By calculating the focal length of the ocular lens, we have determined the distance at which the lens needs to be placed from the objective lens to achieve the desired optical properties in the binocular system.

Learn more about focal length here:

brainly.com/question/2194024

#SPJ11

The corrected near point for the person wearing the glasses is approximately 12.12 cm.

To determine the corrected near point, we can use the lens formula:

1/f = 1/v - 1/u

Where f is the focal length of the lens, v is the image distance, and u is the object distance.

In this case, the glasses have a power of 4.25 diopters, which is equivalent to a focal length of f = 1/4.25 meters.

Since the person's near point without glasses is at 25 cm, which is the object distance (u), we can substitute these values into the lens formula to find the corrected near point.

1/(1/4.25) = 1/v - 1/(0.25)

Simplifying the equation:

4.25 = 1/v - 4

Rearranging the equation to solve for v:

1/v = 4.25 + 4

1/v = 8.25

v = 1/8.25

v ≈ 0.1212 meters or 12.12 cm

Therefore, the corrected near point for the person wearing the glasses is approximately 12.12 cm.

learn more about "focal length ":- https://brainly.com/question/28039799

#SPJ11

The question asks for the equivalent spring constant of a bow and the amount of work done by an archer in drawing the bow. The woman draws the string of the bow back 0.392 m with a steadily increasing force from 0 to 215 N.

To determine the equivalent spring constant of the bow (a), we can use Hooke's Law, which states that the force exerted by a spring is directly proportional to its displacement. In this case, the displacement of the bowstring is given as 0.392 m, and the force increases steadily from 0 to 215 N. Therefore, we can calculate the spring constant using the formula: spring constant = force / displacement. Substituting the values, we have: spring constant = 215 N / 0.392 m = 548.47 N/m.

To calculate the work done by the archer on the string (b), we can use the formula: work = force × displacement. The force applied by the archer steadily increases from 0 to 215 N, and the displacement of the bowstring is given as 0.392 m. Substituting the values, we have: work = 215 N × 0.392 m = 84.28 J (joules). Therefore, the archer does 84.28 joules of work on the string in drawing the bow.

Learn more about Equivalent Spring constant:

https://brainly.com/question/30039564

#SPJ11

In calculus, the derivative represents the instantaneous rate of change. In this case, if an object moves 1449 meters downward in 18 seconds, its velocity is approximately 80.5 meters per second downward.

In calculus, a derivative represents the instantaneous rate of change of a quantity with respect to another. In the context of motion, the derivative of displacement is velocity.

To calculate the velocity, we can use the equation:

velocity (v) = change in displacement (Δx) / change in time (Δt)

Given that the object moves 1449 meters downward in 18 seconds, we can substitute these values into the equation:

v = 1449 meters / 18 seconds

Simplifying the equation, we find that the object has an average velocity of approximately 80.5 meters per second in the downward direction.

The complete question should be:

In roughly 30-50 words, including an equation, if needed, explain what a “derivative” is in calculus, and explain what physical quantity is the derivative of displacement if an object moves 1449 meters downward in 18 seconds.

To learn more about  instantaneous rate of change, Visit:

https://brainly.com/question/28684440

#SPJ11

The rate of heat loss from the standing man by convection in an environment at 20.88°C is 381.58 Watts.

Explanation:

To calculate the rate of heat loss by convection, we can use the formula:

Q = h * A * ΔT

Where:

Q is the rate of heat transfer,

h is the convective heat transfer coefficient,

A is the surface area of the object, and

ΔT is the temperature difference between the object and the environment.

Step 1: Calculate the surface area of the man

The surface area of the vertical cylinder can be calculated using the formula for the lateral surface area of a cylinder:

A = [tex]2 * π * r * h + π * r^2[/tex]

Given:

Diameter of the cylinder = 30.59 cm

Radius (r) = Diameter/2 = 15.295 cm = 0.15295 m

Height (h) = 170.47 cm = 1.7047 m

Plugging the values into the formula:

A = [tex]2 * π * 0.15295 m * 1.7047 m + π * (0.15295 m)^2[/tex]

A ≈ 1.0325 m^2

Step 2: Calculate the temperature difference

ΔT = T_object - T_environment

ΔT = 33.3°C - 20.88°C = 12.42°C = 12.42 K (as temperature is in Kelvin)

Step 3: Calculate the rate of heat loss

Q = h * A * ΔT

Q = 14.48 W/m^2°C * 1.0325 m^2 * 12.42 K

Q ≈ 381.58 Watts

Therefore, the rate of heat loss from the man by convection in an environment at 20.88°C is approximately 381.58 Watts.

Learn more about rate of heat loss

brainly.com/question/14635288

#SPJ11

(a) The force keeping the satellite moving in a circle is the gravitational force between the satellite and the Earth.

In circular motion, there must be a force acting towards the center of the circle to maintain the motion. In this case, the gravitational force between the satellite and the Earth provides the necessary centripetal force.

The gravitational force can be calculated using Newton's law of universal gravitation:

F = G * (m1 * m2) / r^2

where F is the force, G is the gravitational constant (approximately 6.67 x 10^-11 N m^2/kg^2), m1 and m2 are the masses of the two objects (satellite and Earth, respectively), and r is the distance between their centers.

The mass of the satellite is given as 100 kg, and the mass of the Earth is approximately 5.97 x 10^24 kg. The distance between their centers can be calculated by adding the radius of the Earth (6.37 x 10^6 m) to the altitude of the satellite (200,000 m). Thus, the distance is 6.57 x 10^6 m.

Plugging in the values, we get:

F = (6.67 x 10^-11 N m^2/kg^2) * (100 kg) * (5.97 x 10^24 kg) / (6.57 x 10^6 m)^2

Calculating this yields:

F ≈ 980 N

The gravitational force between the satellite and the Earth is responsible for keeping the satellite moving in a circular orbit.

(b) The centripetal force on the satellite is equal to the gravitational force.

The centripetal force on the satellite is approximately 980 N.

In a circular motion, the centripetal force is the net force acting towards the center of the circle. In this case, the gravitational force provides the necessary centripetal force to keep the satellite in its circular orbit.

The centripetal force acting on the satellite is equal to the gravitational force, which is approximately 980 N.

(c) The speed at which the satellite is moving can be determined using the formula for circular motion.

The speed of an object moving in a circular path can be calculated using the formula:

v = √(G * M / r)

where v is the speed, G is the gravitational constant, M is the mass of the central object (Earth), and r is the distance between the centers of the satellite and the Earth.

Plugging in the values, we have:

v = √((6.67 x 10^-11 N m^2/kg^2) * (5.97 x 10^24 kg) / (6.57 x 10^6 m))

Calculating this yields:

v ≈ 7666 m/s

Conclusion: The satellite is moving at a speed of approximately 7666 m/s.

(d) The total mechanical energy of the satellite can be determined by summing its kinetic energy and gravitational potential energy.

The total mechanical energy of an object is the sum of its kinetic energy (resulting from its motion) and its potential energy (resulting from its position or height in a gravitational field).

The kinetic energy of the satellite can be calculated using the formula:

KE = (1/2) * m * v^2

where KE is the kinetic energy, m is the mass of the satellite, and v is its speed.

Plugging in the values, we have:

KE = (1/2) * (100 kg) * (7666 m/s)^2

Calculating this yields:

KE ≈ 2.95 x 10^9 J

The gravitational potential energy of the satellite can be calculated using the formula:

PE = -G * (m1 * m2) / r

where PE is the gravitational potential energy, G is the gravitational constant, m1 and m2 are the masses of the two objects (satellite and Earth, respectively), and r is the distance between their centers.

Plugging in the values, we have:

PE = -(6.67 x 10^-11 N m^2/kg^2) * (100 kg) * (5.97 x 10^24 kg) / (6.57 x 10^6 m)

Calculating this yields:

PE ≈ -2.92 x 10^9 J

Since the potential energy is negative, the total mechanical energy is the sum of the kinetic and potential energies:

Total mechanical energy = KE + PE ≈ 2.95 x 10^9 J + (-2.92 x 10^9 J)

Calculating this yields:

Total mechanical energy ≈ 2.5 x 10^7 J

The total mechanical energy of the satellite is approximately 2.5 x 10^7 joules.

To  know more about Force , visit;

https://brainly.com/question/12785175

#SPJ11

The shape of the equipotential surfaces outside a negatively charged hollow conducting sphere will be spherical.

When considering a negatively charged hollow conducting sphere, the excess negative charge will distribute itself uniformly on the outer surface of the sphere. Due to this uniform charge distribution, the electric field inside the hollow region of the sphere is zero.

For points outside the sphere, the electric field lines will originate from the negative charge on the surface of the sphere and will extend radially outward. Since the electric field lines are perpendicular to the equipotential surfaces, the equipotential surfaces will be perpendicular to the electric field lines.

In a spherically symmetric system, the equipotential surfaces are concentric spheres centered at the origin. Therefore, the equipotential surfaces outside the negatively charged hollow conducting sphere will be spherical in shape.

Read more about equipotential surfaces here: https://brainly.com/question/28444466

#SPJ11

The approximate mass of the floating object is approximately 37.99 grams.

To solve this problem, we can use the concept of potential energy. When the diamagnetic object floats above the levitator, the gravitational potential energy is balanced by the increase in magnetic potential energy.

The gravitational potential energy is by the formula:

[tex]PE_gravity = m * g * h[/tex]

where m is the mass of the object, g is the acceleration due to gravity, and h is the height from the reference point (levitator) to the object.

The magnetic potential energy is by the formula:

[tex]PE_magnetic = -μ • B[/tex]

where μ is the magnetic dipole moment and B is the magnetic field.

In equilibrium, the gravitational potential energy is equal to the magnetic potential energy:

[tex]m * g * h = -μ • B[/tex]

We can rearrange the equation to solve for the mass of the object:

[tex]m = (-μ • B) / (g • h)[/tex]

Magnetic dipole moment [tex](μ) = 3.2 μA⋅m² = 3.2 x 10^(-6) A⋅m²[/tex]

Magnetic field above the object (B1) = 18 T

Magnetic field below the object (B2) = 33 T

Height (h) =[tex]2.0 mm = 2.0 x 10^(-3) m[/tex]

Acceleration due to gravity (g) = 9.81 m/s²

Using the values provided, we can calculate the mass of the floating object:

[tex]m = [(-3.2 x 10^(-6) A⋅m²) • (18 T)] / [(9.81 m/s²) • (2.0 x 10^(-3) m)][/tex]

m = -0.03799 kg

To convert the mass to grams, we multiply by 1000:

[tex]m = -0.03799 kg * 1000 = -37.99 g[/tex]

Since mass cannot be negative, we take the absolute value:

m ≈ 37.99 g

Therefore, the approximate mass of the floating object is approximately 37.99 grams.

Learn more about gravitational potential energy from the given link

https://brainly.com/question/15896499

#SPJ11

A car accelerates uniformly from rest at a rate of 2 m/s² for a distance of 100 meters. How long does it take for the car to reach this distance?

Using the kinematic equation s = ut + (1/2)at², where s is the distance, u is the initial velocity (0 m/s since the car starts from rest), a is the acceleration (2 m/s²), and t is the time, we can solve for t.

Given that the car starts from rest (u = 0 m/s) and accelerates uniformly at a rate of 2 m/s², we can use the kinematic equation s = ut + (1/2)at² to solve for the time taken (t) to cover a distance of 100 meters (s = 100 m).

Substituting the given values into the equation, we have 100 = 0 + (1/2)(2)t². Simplifying the equation, we get 100 = t². Taking the square root of both sides, we find t = ±10.

Since time cannot be negative in this context, the car takes 10 seconds to reach a distance of 100 meters when accelerating uniformly at a rate of 2 m/s².

To learn more about uniform acceleration

brainly.com/question/28641931

#SPJ11

The wavelength of the light source is approximately 3.99e-5 cm.

To convert the wavelength of 399.44 nm to centimeters, we need to divide the value by 10,000 since there are 10,000 nanometers in one centimeter.

399.44 nm / 10,000 = 0.039944 cm

Rounded to four decimal places, the wavelength is approximately 0.0399 cm.

Therefore, the correct answer is option D: 0.0399.

Wavelength is a measure of the distance between two consecutive points on a wave. It represents the spatial extent of one complete cycle of the wave. In the case of light, it is often measured in nanometers (nm) or picometers (pm), but it can be converted to other units for convenience.

Since there are 10,000 nanometers in one centimeter, dividing the wavelength in nanometers by 10,000 gives the equivalent value in centimeters. In this case, the original wavelength of 399.44 nm is divided by 10,000 to obtain 0.039944 cm. Rounding it to four decimal places, we get 0.0399 cm.

This conversion is important in various scientific and engineering applications. It allows for easier comparison and understanding of wavelength values, especially when working with different unit systems. In this case, expressing the wavelength in centimeters provides a more relatable and comprehensible scale for measurement.

Therefore, the correct answer is option D: 0.0399, which represents the wavelength of the particular light source in centimeters.

To learn more about wavelength, click here: https://brainly.com/question/32900586

#SPJ11

The electric-field between the plates of the capacitor is approximately 2831.46 V/m.

The electric field between the plates of a capacitor can be determined by using the formula: Electric field (E) = Voltage difference (V) / Plate separation distance (d)

In this case, we are given the following values:

Charge (Q) = 14.35 microC = 14.35 * 10^-6 C

Voltage difference (V) = 37.25 V

Plate separation distance (d) = 13.16 mm = 13.16 * 10^-3 m

We can calculate the electric field as follows:

E = V / d

E = 37.25 V / (13.16 * 10^-3 m)

E = 2831.46 V/m

Therefore, the electric-field between the plates of the capacitor is approximately 2831.46 V/m.

To learn more about electric-field , click here : https://brainly.com/question/15800304

#SPJ11

Answer:  the density of the liquid is approximately 2499.2 kg/m³

Explanation:

To find the density of the liquid, we can use Archimedes' principle, which states that the buoyant force experienced by an object submerged in a fluid is equal to the weight of the fluid displaced by the object.

The weight of the body in air is given as 98 N, and the weight of the body submerged in the liquid is given as 66.64 N. The difference in weight between the two states represents the weight of the liquid displaced by the body.

Weight of the liquid displaced = Weight in air - Weight submerged = 98 N - 66.64 N = 31.36 N

Now, we can use the formula for density:

Density = (Weight of the liquid displaced) / (Volume of the liquid displaced)

Since the weight of the liquid displaced is 31.36 N and the density of the body is given as 2500 kg/m³, we can rearrange the formula to solve for the volume of the liquid displaced:

Volume of the liquid displaced = (Weight of the liquid displaced) / (Density of the body)

Volume of the liquid displaced = 31.36 N / 2500 kg/m³ = 0.012544 m³

Now, we can find the density of the liquid:

Density of the liquid = (Weight of the liquid displaced) / (Volume of the liquid displaced)

Density of the liquid = 31.36 N / 0.012544 m³ ≈ 2499.2 kg/m³

The slope of the position versus time graph H is velocity. A position-time graph is a graph that shows an object's position as a function of time. Velocity is the slope of the position versus time graph. The slope of a position-time graph at a particular moment is the instantaneous velocity of the object at that moment.

Free-fall refers to the path of an object in the (x,y) plane, whereas a projectile is an object moving under the influence of gravity. The trajectory is the path of an object with no horizontal velocity or acceleration, moving only in the vertical direction under the influence of acceleration due to gravity. Range refers to the horizontal distance traveled by a projectile, and the slope of the position versus time graph H is velocity.

Motion of an object with no horizontal velocity or acceleration, moving only in the vertical direction under the influence of the acceleration due to gravity is trajectory. When an object is thrown or launched, it follows a path through the air that is called its trajectory. In the absence of air resistance, this path is a parabola.

Range is the horizontal distance traveled by a projectile. The greater the initial velocity of a projectile and the higher its angle, the greater its range. When an object is launched from a height above the ground, the range is the horizontal distance traveled by the object until it hits the ground.

To know more about Velocity visit:

https://brainly.com/question/30559316

#SPJ11

The frequency of the beam of infrared light is 183076174.3 Hz.

The energy of a single photon of this light is 1.2145 × 10^-18 J

w = 1639 nm

To find frequency in units of Hz, we use the formula:

v = c/λ

where

c is the speed of light and

λ is the wavelength.

Substituting the values, we get:

v = 3× 10^8 m/s / (1639 × 10^-9 m)v = 183076174.3 Hz

Therefore, the frequency of the beam of infrared light is 183076174.3 Hz.

Now, to find the energy of a single photon of this light, we use the formula:

E = hv

where h is Planck's constant and

v is the frequency.

Substituting the values, we get:

E = 6.626 × 10^-34 J s × 183076174.3 HzE = 1.2145 × 10^-18 J

Therefore, the energy of a single photon of this light is 1.2145 × 10^-18 J.

Learn more about frequency:

https://brainly.com/question/254161

#SPJ11

The separation between the +16μC point charge and +70μC point charge, where the electrostatic force is equal in magnitude to 4.6N, is 0.0887m.

To find the separation between the point charges, we can use Coulomb's law. The formula for Coulomb's law is given as F = k (q1q2) / r² where, F is the electrostatic force, k is Coulomb's constant, q1 and q2 are the magnitudes of the charges, r is the distance between the two charges.

We are given that the electrostatic force between the +16μC point charge and +70μC point charge is equal to 4.6N. Therefore, we can write the equation as:

4.6 = k (16 × 10⁻⁶) (70 × 10⁻⁶) / r²

Simplifying the above equation, we get:

r = 0.0887 m.

Hence, the separation between the +16μC point charge and +70μC point charge, where the electrostatic force is equal in magnitude to 4.6N, is 0.0887m.

Learn more about Coulomb's law here:

https://brainly.com/question/506926

#SPJ11

a) To attenuate reflection from the pond surface, the polarizer should be oriented perpendicular to the surface of the pond.

b) The incident angle on the pond surface at which the reflected light vanishes is the Brewster's angle, which can be calculated using the formula θ_B = arctan(n), where n is the refractive index of water (1.33).

To attenuate reflections from the pond surface, the polarizer should be oriented perpendicular to the surface of the pond. This is because the polarizer filters out light waves that are oscillating in a specific direction, and when the polarizer is perpendicular to the surface, it effectively blocks the horizontally polarized light waves that are responsible for the strong reflections.

The angle at which the reflected light vanishes is known as the Brewster's angle. It can be calculated using the formula: θ_B = arctan(n), where n is the refractive index of water (1.33).

The Brewster's angle is the incident angle at which the reflected light is polarized in a direction parallel to the surface, resulting in minimal reflection. At this angle, the reflected light appears greatly attenuated or even vanishes.

To learn more about reflection click here:

brainly.com/question/29788343

#SPJ11

Terrence's displacement vector is 4.0 km east and 2.0 km north.

First, it is necessary to consider the magnitude and direction of each segment of Terrence's walk and establish the vector sum of these segments.

Terrence walked 2.0 km north and then 4.0 km east. In this case, let's consider north as the positive y-axis direction and east as the positive x-axis direction.

Therefore, we can conclude that:

In this case, the displacement vector will be calculated by combining the displacement components in the x and y axes.

Therefore, Terrence's displacement vector is 4.0 km east and 2.0 km north.

Learn more about vectors:

https://brainly.com/question/29740341

#SPJ4

The situation described is impossible because the resistance values in a circuit cannot be changed by combining resistors in series. When resistors are connected in series, their resistances add up.

In this case, if the technician wants to achieve a resistance of 7/3 R by combining three additional resistors with resistance R, the total resistance would be 4R (R + R + R + R). It is not possible to obtain a resistance of 7/3 R by combining resistors in series, as the sum of the resistance values will always be a multiple of R. Therefore, the technician cannot achieve the desired resistance by combining the resistors in series.

The situation described is impossible because the resistance values in a circuit cannot be changed by simply combining resistors in series. When resistors are connected in series, their resistances add up. In this case, the technician realizes that a better design for the circuit would include a resistance of 7/3 R instead of R. To achieve this, the technician has three additional resistors, each with resistance R.

To know more about values visit :

https://brainly.com/question/30145972

#SPJ11

There is a lower limit to what can actually be seen with visible light visible light waves are smaller than the smallest objects in existence (option b).

The lower limit of visible light is due to the wavelength of the light. This is the primary explanation. There are some things that are too small to be seen using visible light since the wavelength of the light is smaller than the objects' size.  The best option among the given alternatives that explains why there is a lower limit to what can actually be seen with visible light is b) Visible light waves are smaller than the smallest objects in existence.

To know more about visible:

https://brainly.com/question/15093941

#SPJ11