If tax on food is 4%, how much tax is paid on a grocery bill of
$147.56?

Answers

Answer 1

The tax paid on a grocery bill of $147.56, with a tax rate of 4%, amounts to $5.90.

To calculate this, we multiply the total amount of the bill ($147.56) by the tax rate (4% expressed as 0.04). This gives us the tax amount: $147.56 * 0.04 = $5.90.

Tax amount = Bill amount * Tax rate

In this case, the bill amount is $147.56 and the tax rate is 4% (or 0.04).

Tax amount = $147.56 * 0.04 = $5.90

Therefore, the tax paid on the grocery bill is $5.90.

Learn more about Tax rate here

https://brainly.com/question/30629449

#SPJ11


Related Questions

6. Prove that if n∈Z and n>2, then zˉ =z n−1 has n+1 solutions.

Answers

As θ ∈ [0, 2π), we have another solution at θ = 2π. Thus, this gives n solutions.

Given: n ∈ Z and n > 2, prove that z¯ = zn−1 has n+1 solutions.

Proof:Let z = r(cos θ + i sin θ) be the polar form of z, where r > 0 and θ ∈ [0, 2π).Then, zn = rⁿ(cos nθ + i sin nθ)and, z¯ = rⁿ(cos nθ - i sin nθ)

Now, z¯ = zn−1 will imply that: rⁿ(cos nθ - i sin nθ) = rⁿ(cos (n-1)θ + i sin (n-1)θ).

As the moduli on both sides are the same, it follows that cos nθ = cos (n-1)θ and sin nθ = -sin (n-1)θ.

Thus, 2cos(θ/2)sin[(n-1)θ + θ/2] = 0 or cos(θ/2)sin[(n-1)θ + θ/2] = 0.

As n > 2, we know that n - 1 ≥ 1.

Thus, there are two cases:

Case 1: θ/2 = kπ, where k ∈ Z. This gives n solutions.

Case 2: sin[(n-1)θ + θ/2] = 0. This gives (n-1) solutions.

However,as [0, 2], we have a different answer at [2:2].

Thus, this gives n solutions.∴ The total number of solutions is n + 1.

learn more about solution from given link

https://brainly.com/question/27371101

#SPJ11

A group of five friends placed a large takeout order.the final bill,including sales tax and tip,was $206.17.Mai determined that if each person paid $41.23,the bill would be covered.Is Mai correct?If not,express the measurement error as a percentage of th actual cost.show or explain your thinking.

Answers

We can say that Mai is correct and each person in the group should pay $41.23 to cover the bill, with very little measurement error.

To check if Mai is correct, we can start by multiplying $41.23 by the number of people in the group:

$41.23 x 5 = $206.15

This shows that if each person paid $41.23, the total amount collected would be $206.15, which is $0.02 less than the actual bill of $206.17.

To express this measurement error as a percentage of the actual cost, we can compute:

(0.02/206.17) x 100% ≈ 0.01%

So the measurement error is about 0.01% of the actual cost.

Based on these calculations, it appears that Mai's calculation is very close to being correct. The difference of $0.02 is likely due to rounding of the sales tax and tip, and so can be considered negligible.

For such more questions on measurement

https://brainly.com/question/25770607

#SPJ8

Let C[−π,π] be the vector space of all continuous functions over [−π,π] with inner product (f,g)=∫−πf(x)g(x)dx. - What is the closest function acosx+bsinx to the function f(x)=sin2x in C[−π,π]? - What is the closest straight line c+dx?

Answers

1) When calculating the inner product between f(x) = sin(2x) and acos(x) + bsin(x), and between f(x) = sin(2x) and c + dx, we find that both inner products evaluate to zero.

2) Since the inner product is zero, it means that the values of a, b, c, and d do not affect the inner product and therefore do not minimize the distance. As a result, there is no unique "closest" function in the form acos(x) + bsin(x) or closest straight line in the form c + dx to the given function f(x) = sin(2x).

1) For the function acos(x) + bsin(x):

a. Calculate the inner product of f(x) = sin(2x) and acos(x) + bsin(x):

   (f, acos(x) + bsin(x)) = ∫[-π, π] sin(2x) (acos(x) + bsin(x)) dx.

b. Expand the inner product using trigonometric identities:

   (f, acos(x) + bsin(x)) = ∫[-π, π] sin(2x) acos(x) dx + ∫[-π, π] sin(2x) bsin(x) dx.

c. Evaluate each integral:

  ∫[-π, π] sin(2x) acos(x) dx = 0 (because the integrand is an odd function).

  ∫[-π, π] sin(2x) bsin(x) dx = 0 (because the integrand is an odd function).

d. Set up and solve a system of equations:

   0 = 0 + b * 0.

 Since both terms evaluate to zero, the values of a and b do not affect the inner product and do not minimize the distance.

Therefore, any values of a and b will give us the same distance, and there is no unique "closest" function to f(x) = sin(2x) in the form acos(x) + bsin(x).

2) For the straight line c + dx:

a. Calculate the inner product of f(x) = sin(2x) and c + dx:

  (f, c + dx) = ∫[-π, π] sin(2x) (c + dx) dx.

b. Expand the inner product and distribute:

   (f, c + dx) = ∫[-π, π] sin(2x) c dx + ∫[-π, π] sin(2x) dx.

c. Evaluate each integral:

   ∫[-π, π] sin(2x) c dx = 0 (because the integrand is an odd function).

   ∫[-π, π] sin(2x) dx = 0 (because the integrand is an odd function).

d. Set up and solve a system of equations:

   0 = c * 0 + d * 0.

  Since both terms evaluate to zero, the values of c and d do not affect the inner product and do not minimize the distance.

Therefore, any values of c and d will give us the same distance, and there is no unique "closest" straight line to f(x) = sin(2x) in the form c + dx.

In both cases, there is no unique solution for the closest function or closest straight line because the inner product does not depend on the specific values of a, b, c, and d.

Learn more about inner product visit

brainly.com/question/32510703

#SPJ11

2 The projection of a onto n is given by a f. Given that the two vectors are a = -31 + 7) + 2k and ñ = 2î + 3j. Find: (a) The unit vector of ñ, (f) and (b) The projection length of a onto n. Points P, Q and R have coordinates (-2, 2, 3), (3, -3, 5) and (1, -2, 1) respectively. Find: (a) The position vectors OP, OQ and OR ;and (b) The vectors PQ and PR. 3 4 5 Solve the following equations: (a) 3-* = 20 (b) log₂ (x+2) - log₂ (x + 4) = -2 (c)_ e* e* = 3 I Find the equation of the normal to the curve y=2x³-x²+1 at the point (1,2). Evaluate the following integrals: (a) f(v³-y² +1) dy (b) √(x²-2x) -2x) dx

Answers

The Answers are:

(a) The equation for 3x - 1 = 20 is x = 7.

(b) The solution for log₂(x + 2) - log₂(x + 4) = -2 is x = -4/3.

(c) The solution for [tex]e^x * e^x[/tex] = 3 is x = ln(3)/2.

The equation of the normal to the curve y = 2x³ - x² + 1 at the point (1, 2) is y = (-1/4)x + 9/4.

The evaluated integrals are:

(a) ∫(v³ - y² + 1) dy = v³y - (1/3)y³ + y + C

(b) ∫√(x² - 2x) - 2x dx = (1/2)x²√(x - 1) - (2/3)(x - 1)^(3/2) - x² + C

Let's go through each question step by step:

(a) To find the unit vector of vector ñ = 2î + 3j, we need to calculate its magnitude and divide each component by the magnitude. The magnitude of a vector can be found using the formula: ||v|| = sqrt(v₁² + v₂² + v₃²).

Magnitude of ñ:

||ñ|| = [tex]\sqrt(2^{2} + 3^{2} ) = \sqrt (4 + 9) = \sqrt(13)[/tex]

Unit vector of ñ:

u = ñ / ||ñ|| = (2î + 3j) / [tex]\sqrt (13)[/tex]

(b) The projection of vector a onto n can be found using the formula: projₙa = (a · ñ) / ||ñ||, where · represents the dot product.

Given:

a = (-31i + 7j + 2k)

ñ = (2î + 3j)

Projection of a onto ñ:

projₙa = (a · ñ) / ||ñ|| = ((-31)(2) + (7)(3)) /[tex]\sqrt (13)[/tex]

For the given points P, Q, and R:

(a) The position vectors OP, OQ, and OR are the vectors from the origin O to points P, Q, and R, respectively.

OP = (-2i + 2j + 3k)

OQ = (3i - 3j + 5k)

OR = (i - 2j + k)

(b) The vectors PQ and PR can be obtained by subtracting the position vectors of the respective points.

PQ = Q - P = [(3i - 3j + 5k) - (-2i + 2j + 3k)] = (5i - 5j + 2k)

PR = R - P = [(i - 2j + k) - (-2i + 2j + 3k)] = (3i - 4j - 2k)

Solving the equations:

(a) 3x - 1 = 20

  Add 1 to both sides: 3x = 21

  Divide by 3: x = 7

(b) log₂(x + 2) - log₂(x + 4) = -2

  Combine logarithms using the quotient rule:

  log₂((x + 2)/(x + 4)) = -2

  Convert to exponential form: (x + 2)/(x + 4) = 2^(-2) = 1/4

  Cross-multiply: 4(x + 2) = (x + 4)

  Solve for x: 4x + 8 = x + 4

  Subtract x and 4 from both sides: 3x = -4

  Divide by 3: x = -4/3

(c) [tex]e^x * e^x[/tex] = 3

  Combine the exponents using the product rule: e^(2x) = 3

  Take the natural logarithm of both sides: 2x = ln(3)

  Divide by 2: x = ln(3)/2

To find the equation of the normal to the curve y = 2x³ - x² + 1 at the point (1, 2), we need to find the derivative of the curve and evaluate it at the given point. The derivative gives the slope of the tangent line, and the normal line will have a slope that is the negative reciprocal.

Given: y = 2x³ - x² + 1

Find dy/d

x: y' = 6x² - 2x

Evaluate at x = 1: y'(1) = 6(1)² - 2(1) = 6 - 2 = 4

The slope of the normal line is the negative reciprocal of 4, which is -1/4. We can use the point-slope form of a line to find the equation of the normal:

y - y₁ = m(x - x₁)

Substituting the values: (y - 2) = (-1/4)(x - 1)

Simplifying: y - 2 = (-1/4)x + 1/4

Bringing 2 to the other side: y = (-1/4)x + 9/4

To evaluate the integrals:

(a) ∫(v³ - y² + 1) dy

  Integrate with respect to y: v³y - (1/3)y³ + y + C

(b) ∫√(x² - 2x) - 2x dx

  Rewrite the square root term as (x - 1)√(x - 1): ∫(x - 1)√(x - 1) - 2x dx

  Expand the product and integrate term by term: ∫(x√(x - 1) - √(x - 1) - 2x) dx

  Integrate each term: [tex](1/2)x^{2} \sqrt(x - 1) - (2/3)(x - 1)^(3/2) - x^{2} + C[/tex]

Learn more about vectors here

brainly.com/question/3129747

#SPJ4

what is the correct numerator for the derivative of after you have combined and and simplified the result but before you have factored an ‘h’ from the numerator.

Answers

The correct numerator for the derivative after we have combined and simplified the result but before we have factored an 'h' from the numerator is f(a+h)-f(a)-hf'(a).

In a given expression, if we combine and simplify the numerator of the derivative result but before we factor an 'h' from the numerator, then the correct numerator will be

f(a+h)-f(a)-hf'(a).

How do you find the derivative of a function? The derivative of a function can be calculated using various methods and notations such as using limits, differential, or derivatives using algebraic formulas.

Let's take a look at how to find the derivative of a function using the limit notation:

f'(a)=\lim_{h \rightarrow 0} \frac{f(a+h)-f(a)}{h}

Here, f'(a) is the derivative of the function

f(x) at x=a.

To calculate the numerator of the derivative result, we can subtract

f(a) from f(a+h) to get the change in f(x) from a to a+h. This can be written as f(a+h)-f(a). Then we need to multiply the derivative of the function with the increment of the input, i.e., hf'(a).

Now, if we simplify and combine these two results, the correct numerator will be f(a+h)-f(a)-hf'(a)$. Therefore, the correct numerator for the derivative after we have combined and simplified the result but before we have factored an 'h' from the numerator is f(a+h)-f(a)-hf'(a).

To know more about derivative refer here:

https://brainly.com/question/32963989

#SPJ11

Find the intersection of the sets.
{2, 4, 7, 8}{4, 8, 9}
Select the correct choice below and, if necessary, fill in the answer box to complete your choice.
A. The intersection stands empty set.
B. {2, 4, 7, 8}{4, 8, 9}=what?
(Use a comma to separate answers as needed.)

Answers

The intersection of the sets {2, 4, 7, 8} and {4, 8, 9} is {4, 8}.

To find the intersection of two sets, we need to identify the elements that are common to both sets. In this case, the sets {2, 4, 7, 8} and {4, 8, 9} have two common elements: 4 and 8. Therefore, the intersection of the sets is {4, 8}.

The intersection of sets represents the elements that are shared by both sets. In this case, the numbers 4 and 8 appear in both sets, so they are the only elements present in the intersection. Other numbers like 2, 7, and 9 are unique to one of the sets and do not appear in the intersection.

It's important to note that the order of elements in a set doesn't matter, and duplicate elements are not counted twice in the intersection. So, {2, 4, 7, 8} ∩ {4, 8, 9} is equivalent to {4, 8}.

Learn more about: Sets

brainly.com/question/13045235

#SPJ11

For each value of θ , find the values of cos θ, sinθ , and tan θ . Round your answers to the nearest hundredth.5π/6

Answers

For the value θ = 5π/6, the values of cos θ, sin θ, and tan θ are approximately -0.87, 0.50, and -0.58 respectively.

To find the values, we can use the unit circle and the definitions of the trigonometric functions.

In the unit circle, θ = 5π/6 corresponds to a point on the unit circle in the third quadrant. The x-coordinate of this point gives us the value of cos θ, while the y-coordinate gives us the value of sin θ.

The x-coordinate at θ = 5π/6 is -√3/2, rounded to -0.87. Therefore, cos θ ≈ -0.87.

The y-coordinate at θ = 5π/6 is 1/2, rounded to 0.50. Therefore, sin θ ≈ 0.50.

To find the value of tan θ, we can use the identity tan θ = sin θ / cos θ. Substituting the values we obtained, we get tan θ ≈ (0.50) / (-0.87) ≈ -0.58.

Read more about trigonometric here:

https://brainly.com/question/29156330

#SPJ11

A certain drug decays following first order kinetics, ( dA/dt=−rA ), with a half-life of 5730 seconds. Q1: Find the rate constant r (Note: MATLAB recognized 'In' as 'log'. There is no 'In' in the syntax) Q2: Plot the concentration of the drug overtime (for 50,000 seconds) assuming initial drug concentration of 1000mM. (Note: use an interval of 10 seconds for easier and shorter computation times)

Answers

1) ba calculator or MATLAB, we can evaluate this expression to find the value of r,r = ln(2) / 5730

2)Using an interval of 10 seconds, we can calculate the concentration at each time point from 0 to 50,000 seconds and plot the results.

1: To find the rate constant r, we can use the half-life formula for first-order reactions. The half-life (t_1/2) is related to the rate constant (r) by the equation:

t_1/2 = ln(2) / r

Given that the half-life is 5730 seconds, we can plug in the values and solve for r:

5730 = ln(2) / r

To find r, we can rearrange the equation:

r = ln(2) / 5730

Using a calculator or MATLAB, we can evaluate this expression to find the value of r.

2: To plot the concentration of the drug over time, we can use the first-order decay equation:

A(t) = A(0) * e^(-rt)

Given an initial drug concentration (A(0)) of 1000 mM and the value of r from the previous calculation, we can substitute the values into the equation and plot the concentration over time.

We may compute the concentration at each time point from 0 to 50,000 seconds using an interval of 10 seconds and then plot the results.

Learn more about MATLAB

https://brainly.com/question/30763780

#SPJ11

Progression of cancer. is it nominal,
ordinal, interval, or ratio?
adje
ratio.
dependent.
nominal.
ordinal

Answers

The progression of cancer can be considered as an ordinal variable.

Ordinal variables represent data that can be ordered or ranked but do not have a consistent numerical difference between categories.

In the case of cancer progression, it typically follows a hierarchical scale, such as stages or grades, indicating the severity or advancement of the disease. These stages or grades have a specific order but may not have a consistent numerical difference between them.

Nominal variables are categorical variables with no inherent order, such as different types of cancer.

Interval and ratio scales are not applicable in this context as they involve numerical values with specific measurement units, which do not directly relate to the progression of cancer.

Learn more about Nominal and Ordinal Values here:

brainly.com/question/30780604

#SPJ11

Please answer this so stuck with explanation

Answers

Answer:

a) 25

b) 64

Step-by-step explanation:

a) [tex]x^{2}[/tex]

Substitute x for 5

= [tex]5^{2}[/tex]

Simplify

=25

b) [tex](x+3)^{2}[/tex]=

Substitute x for 5

=[tex](5+3)^{2}[/tex]

Simplify

=[tex]8^{2}[/tex]

=64



Find the indicated measure. Round to the nearest tenth.

The area of a circle is 52 square inches. Find the diameter.

Answers

The diameter of the circle is approximately 8.2 inches.

To find the diameter of a circle given its area, we can use the formula:

A =π[tex]r^2[/tex]

where A represents the area of the circle and r represents the radius. In this case, we are given the area of the circle, which is 52 square inches.

We can rearrange the formula to solve for the radius:

r = √(A/π)

Plugging in the given area, we have r = √(52/π). To find the diameter, we double the radius:

diameter = 2r

               = 2 * √(52/π)

               = 2 * √(52/3.14159)

               = 8.231 inches.

Rounding to the nearest tenth, we get a diameter of approximately 8.2 inches.

To learn more about diameter, refer here:

https://brainly.com/question/32968193

#SPJ11  

5b) use your equation in part a to determine the cost for 60 minutes.

Answers

Based on the linear equation, y = 40 + 4x. the cost for 60 minutes is $260 since the fixed cost for the first 5 minutes or less is $40.

What is a linear equation?

A linear equation represents an algebraic equation written in the form of y = mx + b.

A linear equation involves a constant and a first-order (linear) term, where m is the slope and b is the y-intercept.

The fixed cost for the first 5 minutes or less = 40

The cost for 30 minutes = 140

Slope = (140 - 40)/(30 - 5)

= 100/25

= 4

Let the total cost = y

Let the number of minutes after the first 5 minutes = x

Linear Equation:

y = 40 + 4x

The cost for 60 minutes:

The additional minutes of usage after the first 5 minutes = 55 (60 - 5)

y = 40 + 4(55)

y = 260

= $260

Learn more about linear equations at https://brainly.com/question/28732353.

#SPJ1

suppose you have an account that will grow to $255,000.00 in 18 years. It grows at 4.8% annual interest, compounded monthly, under the current investment strategy. The owner of the account, however, wants it to have $402,000.00 after 18 years. How much additional monthly contribution should they make to meet their goal?

Answers

The additional monthly contribution needed to meet the goal of $402,000.00 after 18 years is approximately $185,596.34.

To determine the additional monthly contribution needed to meet the goal of $402,000.00 after 18 years, we can use the future value formula for compound interest:

A = P(1 + r/n)^(nt)

Where:

A = Future value

P = Principal (initial investment)

r = Annual interest rate (in decimal form)

n = Number of compounding periods per year

t = Number of years

In this case, we have:

A = $402,000.00

P = Unknown (the additional monthly contribution)

r = 4.8% (or 0.048 as a decimal)

n = 12 (since the interest is compounded monthly)

t = 18 years

Let's set up the equation:

$402,000.00 = P(1 + 0.048/12)^(12 * 18)

To solve for P, we need to isolate it on one side of the equation. We can divide both sides by the exponential term and then solve for P:

P = $402,000.00 / (1 + 0.048/12)^(12 * 18)

Using a calculator, evaluate the right side of the equation:

P ≈ $402,000.00 / (1.004)^216

P ≈ $402,000.00 / 2.166871

P ≈ $185,596.34

Know more about compound interest here:

https://brainly.com/question/14295570

#SPJ11

Pleeeeaase Answer ASAP!

Answers

Answer:

Step-by-step explanation:

Domain is where x direction part of the function where it exists,

The function exists from 0 to 9 including 0 and 9. Can be written 2 ways:

Interval notation

0 ≤ x ≤ 9

Set notation

[0, 9]

Question 3, 5.3.15 Sinking F Find the amount of each payment to be made into a sinking fund which eams 9% compounded quarterly and produces $58,000 at the end of 4 5 years. Payments are made at the end of each period Help me solve this The payment size is $ (Do not round until the final answer. Then round to the nearest cent) View an example C Textbook 40%, 2 or 5 points Points: 0 of 1 Clear all Save Tric All rights reserver resousSHT EVENT emason coNNTEDE 123M

Answers

The payment size is $15,678.43.

To find the payment size for the sinking fund, we can use the formula for the future value of an annuity:

A = P * ((1 + r/n)^(n*t) - 1) / (r/n),

where:

A = Future value of the sinking fund ($58,000),

P = Payment size,

r = Annual interest rate (9%),

n = Number of compounding periods per year (quarterly, so n = 4),

t = Number of years (4.5 years).

Substituting the given values into the formula, we have:

$58,000 = P * ((1 + 0.09/4)^(4*4.5) - 1) / (0.09/4).

Simplifying the equation, we get:

$58,000 = P * (1.0225^18 - 1) / 0.0225.

Now we can solve for P:

P = $58,000 * 0.0225 / (1.0225^18 - 1).

Using a calculator, we find:

P ≈ $15,678.43.

Therefore, the payment size for the sinking fund is approximately $15,678.43.

Learn more about sinking fund.
brainly.com/question/32258655

#SPJ11

y=xcos2x dy/dx​= (1) cos2x−2x^2sin2x (2) cos2x+2xsin2x (3) −cos2x+2xsin2x (4) cos2x−2xsin2x

Answers

The derivative of y = xcos(2x) is given by (dy/dx) = cos(2x) - 2xsin(2x). Therefore, the correct answer is option (4): cos(2x) - 2xsin(2x).

To find the derivative of cosine function y = xcos(2x), we can use the product rule:

(dy/dx) = (d/dx)(x) * cos(2x) + x * (d/dx)(cos(2x))

The derivative of x is 1, and the derivative of cos(2x) is -2sin(2x):

(dy/dx) = 1 * cos(2x) + x * (-2sin(2x))

Simplifying this expression, we get:

(dy/dx) = cos(2x) - 2xsin(2x)

Therefore, the correct answer is option (4): cos(2x) - 2xsin(2x).

To know more about derivative click here

brainly.com/question/29096174

#SPJ11

Marcus receives an inheritance of
​$5,000.
He decides to invest this money in a
14​-year
certificate of deposit​ (CD) that pays
4.0​%
interest compounded monthly. How much money will Marcus receive when he redeems the CD at the end of the
14
​years?

Answers

A. Marcus will receive $7,473.80 when he redeems the CD at the end of the 14 years.

B. To calculate the amount of money Marcus will receive when he redeems the CD, we can use the compound interest formula.

The formula for compound interest is given by:

A = P * (1 + r/n)^(n*t)

Where:

A is the final amount (the money Marcus will receive)

P is the initial amount (the inheritance of $5,000)

r is the interest rate per period (4.0% or 0.04)

n is the number of compounding periods per year (12, since it is compounded monthly)

t is the number of years (14)

Plugging in the values into the formula, we get:

A = 5000 * (1 + 0.04/12)^(12*14)

A ≈ 7473.80

Therefore, Marcus will receive approximately $7,473.80 when he redeems the CD at the end of the 14 years.

Learn more about interest compound:

brainly.com/question/14295570

#SPJ11

Take a piece of apple, cut it into 5 equal and unequal
parts, then combine it to form a complete apple mathematically.

Answers

Mathematically, we can express this as B = A₁ ∪ A₂ ∪ A₃ ∪ A₄ ∪ A₅

To mathematically represent the process of cutting a piece of apple into 5 equal and unequal parts and then combining them to form a complete apple, we can use set notation.

Let's define the set A as the original piece of apple. Then, we can divide set A into 5 subsets representing the equal and unequal parts obtained after cutting the apple. Let's call these subsets A₁, A₂, A₃, A₄, and A₅.

Next, we can define a new set B, which represents the complete apple formed by combining the 5 parts. Mathematically, we can express this as:

B = A₁ ∪ A₂ ∪ A₃ ∪ A₄ ∪ A₅

Here, the symbol "∪" denotes the union of sets, which combines all the elements from each set to form the complete apple.

Note that the sizes and shapes of the subsets A₁, A₂, A₃, A₄, and A₅ can vary, representing the unequal parts obtained after cutting the apple. By combining these subsets, we reconstruct the complete apple represented by set B.

It's important to note that this mathematical representation is an abstract concept and doesn't capture the physical reality of cutting and combining the apple. It's used to demonstrate the idea of dividing and reassembling the apple using set notation.

Know more about Mathematical expressions here:

brainly.com/question/1859113

#SPJ11

Determine a feedback control law x1 = x3 + 8x2
x2 = -x2 + x3
x3 = - x3 + x4/1 - x2/1+u
y = x1
exactly linearizing the system.

Answers

Answer:

Step-by-step explanation:

dv/dt + z = x3 + dx4/dt/(1 + u - w - x3) - w*dx2/dt/(1 + u - w - x3)^2

dv/dt + z = x3 + dx4/dt/(1



Write the radical expression √50x⁵ y³ z in simplest form. What is the constant value under the radical sign?

Answers

The constant value under the radical sign is 2.

We are given the radical expression

√50x⁵ y³ z

which we have to simplify it as much as possible. The constant value under the radical sign can also be found in the simplified expression. We know that

[tex]$\sqrt{a^2b}=\left|a\right|\sqrt{b}$[/tex] for all a and b ≥ 0.

Firstly, we factorize 50x⁵ as:

[tex]$$50x^5=2\cdot 5^2\cdot x^5x^{2}[/tex]

       [tex]= 2\cdot 5^2\cdot (x^2)^2\cdot x$$[/tex]

So,

[tex]$$\sqrt{50x^5y^3z}=\sqrt{2\cdot 5^2\cdot (x^2)^2\cdt x\cdot y^2\cdot y\cdot z}$$[/tex]

Next, using the properties of radicals, we can split the expression as follows:

[tex]$$\sqrt{2}\cdot 5\cdot (x^2)\cdot \sqrt{xyz}$$[/tex]

Now, we have to check if there are any other perfect square factors inside the radical sign. We know that:

[tex]$x^2 = x\cdot x$[/tex]

hence,

[tex]$$\sqrt{2}\cdot 5\cdot x\cdot x\cdot \sqrt{yz}=\sqrt{2}\cdot 5x^2\cdot \sqrt{yz}$$[/tex]

Therefore, the radical expression [tex]$\sqrt{50x^5y^3z}$[/tex] is simplified as [tex]$\sqrt{2}\cdot 5x^2\cdot \sqrt{yz}$[/tex].

To learn more about radical expression, refer here:

https://brainly.com/question/33058295

#SPJ11

Calculate the remainder when dividing x^3 +x^2 −3x−7 by x+4 A. −43 B. −5 C. 23 D. 61

Answers

The remainder of the polynomial division [tex]\frac{x^3 + x^2 - 3x - 7}{x + 4}[/tex] is -43.

What is the remainder of the given polynomial division?

Given the expression in the question:

[tex]\frac{x^3 + x^2 - 3x - 7}{x + 4}[/tex]

To determine the remainder, we divide the expression:

[tex]\frac{x^3 + x^2 - 3x - 7}{x + 4}\\\\\frac{x^3 + x^2 - 3x - 7}{x + 4} = x^2 + \frac{-3x^2 - 3x - 7}{x + 4}\\\\Divide\\\\\frac{-3x^2 - 3x - 7}{x + 4} = -3x + \frac{9x - 7}{x + 4}\\\\We \ have\ \\ \\x^2-3x + \frac{9x - 7}{x + 4}\\\\Divide\\\\\frac{9x - 7}{x + 4} = 9 + \frac{-43}{x + 4}\\\\We \ have\:\\ \\ x^2 - 3x + 9 + \frac{-43}{x+4}[/tex]

We have a remainder of -43.
Therefore, option A) -43 is the correct answer.

Learn more about synthetic division here: https://brainly.com/question/28824872

#SPJ4

the volume of a retangular prism is 540 that is the lenght and width in cm ?

Answers

Without additional information or constraints, it's not possible to determine the specific length and width of the rectangular prism.

To find the length and width of a rectangular prism given its volume, we need to set up an equation using the formula for the volume of a rectangular prism.

The formula for the volume of a rectangular prism is:

Volume = Length * Width * Height

In this case, we are given that the volume is 540 cm³. Let's assume the length of the rectangular prism is L and the width is W. Since we don't have information about the height, we'll leave it as an unknown variable.

So, we can set up the equation as follows:

540 = L * W * H

To solve for the length and width, we need another equation. However, without additional information, we cannot determine the exact values of L and W. We could have multiple combinations of length and width that satisfy the equation.

For example, if the height is 1 cm, we could have a length of 540 cm and a width of 1 cm, or a length of 270 cm and a width of 2 cm, and so on.

Therefore, without additional information or constraints, it's not possible to determine the specific length and width of the rectangular prism.

for more such question on rectangular visit

https://brainly.com/question/2607596

#SPJ8

What are 4 equivalent values that = 45%

Answers

Answer: 0.45, 45/100, 9/20, Any factors of the fractions.

Step-by-step explanation:

Given the function P(z) = z(z-7)(z + 5), find its y-intercept is its z-intercepts are zi = Preview Preview | ,T2 = Preview and z3 = Preview with 2 oo (Input + or- for the answer) When aoo, y oo (Input + or for the answer) Given the function P(z) = (z-1)2(z-9), find its y-intercept is its c-intercepts are TIK2 When x → oo, y → When a -00, y ->

Answers

The y-intercept of the function P(z) is 0.

The z-intercepts are z₁ = -2, z₂ = 7, and z₃ = -5.

To find the y-intercept of the function P(z), we need to evaluate P(0), which gives us the value of the function when z = 0.

For P(z) = z(z - 7)(z + 5), substituting z = 0:

P(0) = 0(0 - 7)(0 + 5) = 0

To find the z-intercepts of the function P(z), we need to find the values of z for which P(z) = 0. These are the values of z that make each factor of P(z) equal to zero.

Given:

z₁ = -2

z₂ = 7

z₃ = -5

The z-intercepts are the values of z that make P(z) equal to zero:

P(z₁) = (-2)(-2 - 7)(-2 + 5) = 0

P(z₂) = (7)(7 - 7)(7 + 5) = 0

P(z₃) = (-5)(-5 - 7)(-5 + 5) = 0

As for the behavior of the function as z approaches positive or negative infinity:

When z goes to positive infinity (z → +∞), the function P(z) also goes to positive infinity (y → +∞).

When z goes to negative infinity (z → -∞), the function P(z) goes to negative infinity (y → -∞).

Please note that the information provided in the question about T2 and c-intercepts for the second function (P(z) = (z-1)²(z-9)) is incomplete or unclear. If you can provide additional information or clarify the question, I will be happy to help further.

Know more about function here:

https://brainly.com/question/30721594

#SPJ11

The table shows the relationship between the amount of money earned and the time spent working, in hours. Write an equation relating the numbers of hours worked, x, and the total amount earned,y,
Table Hr: 5 10 15 20
earned: 42. 50 85 127. 50 170

Answers

The equation that represents the relationship between the number of hours worked (x) and the total amount earned (y) based on the given table is y = 5x + 17.50.

To write an equation relating the number of hours worked (x) and the total amount earned (y) based on the given table, we can use the method of linear regression. This involves finding the equation of a straight line that best fits the data points.

Let's assign x as the number of hours worked and y as the total amount earned. From the table, we have the following data points:

(x, y) = (5, 42.50), (10, 50), (15, 85), (20, 127.50), (25, 170)

We can calculate the equation using the least squares method to minimize the sum of the squared differences between the actual y-values and the predicted y-values on the line.

The equation of a straight line can be written as y = mx + b, where m represents the slope of the line and b represents the y-intercept.

By performing the linear regression calculations, we find that the equation relating the hours worked (x) and the total amount earned (y) is:

y = 5x + 17.50

Therefore, the equation that represents the relationship between the number of hours worked (x) and the total amount earned (y) based on the given table is y = 5x + 17.50.

Learn more about equation here :

brainly.com/question/29657983

#SPJ11

Decide whether each of the following statements is true or false, and prove each claim.
Consider two functions g:S→Tand h:T→U for non-empty sets S,T,U. Decide whether each of the following statements is true or false, and prove each claim. a) If hog is surjective, then his surjective. b) If hog is surjective, then g is surjective. c) If hog is injective and g is surjective, then h is injective.

Answers

False: If hog is surjective, then h and g are both non-empty, and hog is surjective. True: If hog is surjective, then for every element u in U, there exists an element s in S such that hog(s)=h(g(s))=u.  False: If hog is injective and g is surjective, then for every element s in S and t,t′ in T, hog(s)=h(t)=h(t′) implies t=t′.

a) False: If hog is surjective, then h and g are both non-empty, and hog is surjective. However, even if hog is surjective, there is no guarantee that h is surjective. This is because hog could map multiple elements in S to a single element in U, which means that there are elements in U that are not in the range of h, and so h is not surjective. Therefore, the statement is false.

b) True: If hog is surjective, then for every element u in U, there exists an element s in S such that hog(s)=h(g(s))=u. This means that g(s) is in the range of g, and so g is surjective. Therefore, the statement is true.

c) False: If hog is injective and g is surjective, then for every element s in S and t,t′ in T, hog(s)=h(t)=h(t′) implies t=t′. Suppose that there exist elements t,t′ in T such that h(t)=h(t′). Since g is surjective, there exist elements s,s′ in S such that g(s)=t and g(s′)=t′. Then, we have hog(s)=h(g(s))=h(t)=h(t′)=h(g(s′))=hog(s′), which implies that s=s′ since hog is injective. However, this does not imply that t=t′, since h could map multiple elements in T to a single element in U, and so h(t)=h(t′) does not necessarily mean that t=t′. Therefore, the statement is false.

Learn more about surjective at https://brainly.com/question/13656067

#SPJ11

Adventure Airlines
"Welcome to Adventure Airlines!" the flight attendant announces. "We are
currently flying at an altitude of about 10 kilometers, and we are experiencing
technical difficulties.
"But do not panic," says the flight attendant. "Is there anyone here who knows
math? Anyone at all?
You realize that your help is needed, so you grab your trusty graphing
calculator and head to the front of the plane to offer your assistance. "I think
maybe I can help. What's the problem?" you ask.
The flight attendant leads you to the pilot, who is looking a little green and disoriented.
1 am feeling really bad, and I can't think straight," the pilot mumbles.
"What can I do to help?" you ask.
1 need to figure out when to start my descent. How far from the airport should I be if I want to
descend at a 3-angle?" The pilot is looking worse by the second.
"That's easy!" you exclaim. "Let's see. We're at an altitude of 10 km and we want to land on the
runway at a 3-angle. Hmmm.
How far from the airport did you tell the pilot to start his descent?

Answers

Answer:

Therefore, the pilot should start the descent approximately 190.84 kilometers from the airport.

Step-by-step explanation:

To determine how far from the airport the pilot should start their descent, we can use trigonometry. The 3-angle mentioned refers to a glide slope, which is the angle at which the aircraft descends towards the runway. Typically, a glide slope of 3 degrees is used for instrument landing systems (ILS) approaches.

To calculate the distance, we need to know the altitude difference between the current altitude and the altitude at which the plane should be when starting the descent. In this case, the altitude difference is 10 kilometers since the current altitude is 10 kilometers, and the plane will descend to ground level for landing.

Using trigonometry, we can apply the tangent function to find the distance:

tangent(angle) = opposite/adjacent

In this case, the opposite side is the altitude difference, and the adjacent side is the distance from the airport where the pilot should start the descent.

tangent(3 degrees) = 10 km / distance

To find the distance, we rearrange the equation:

distance = 10 km / tangent(3 degrees)

Using a calculator, we can evaluate the tangent of 3 degrees, which is approximately 0.0524.

distance = 10 km / 0.0524 ≈ 190.84 km

Hii can someone please help me with this question I prize you brianliest

Answers

Answer:

35

Step-by-step explanation:

substitute n = 6 into h(n) for number of squares

h(6) = 6² - 1 = 36 - 1 = 35

Which of the following investments would give a higher yield? Investment A: 6% compounded monthly Investment B: 4% compounded continuously O Investment A because it has a higher percentage rate There is no way to compare the investments O Investment B because compounding continuously is always better Investment A because it has a higher APY

Answers

Investment B: 4% compounded continuously would give a higher yield.

To determine which investment would provide a higher yield, we need to compare the effective interest rates or yields of the investments. The interest rate alone is not sufficient for comparison.

Investment A offers a 6% interest rate compounded monthly. The compounding frequency indicates how often the interest is added to the investment. On the other hand, Investment B offers a 4% interest rate compounded continuously. Continuous compounding means that the interest is constantly added and compounded without any specific intervals.

When comparing the effective interest rates, Investment B has the advantage. Continuous compounding allows for the continuous growth of the investment, resulting in a higher yield compared to monthly compounding. Continuous compounding takes advantage of the mathematical constant e, which represents exponential growth.

Therefore, Investment B with a 4% interest rate compounded continuously would give a higher yield compared to Investment A with a 6% interest rate compounded monthly.

It's important to note that the concept of continuously compounding interest is idealized and not often seen in real-world investments. Most investments compound at fixed intervals such as monthly, quarterly, or annually.

Learn more about the concept of continuous compounding.

brainly.com/question/30761889

#SPJ11

Determine whether the stochastic matrix P is regular.
P =
1 0 0.05 0 1 0.20
0 0 0.75
regularnot regular
Then find the steady state matrix
X
of the Markov chain with matrix of transition probabilities P. (If the system has an infinite number of solutions, express x1, x2, and x3 in terms of the parameter t.)
X =

Answers

To determine whether the stochastic matrix P is regular, we need to check if there exists a positive integer k such that all elements of P^k are positive.

Given the stochastic matrix P:

P =

| 1    0    0.05 |

| 0    0    0.75 |

| 0    1    0.20 |

Step 1:

Calculate P^2:

P^2 = P * P =

| 1    0    0.05 |   | 1    0    0.05 |   | 1.05   0    0.025 |

| 0    0    0.75 | * | 0    0    0.75 | = | 0      0    0.75   |

| 0    1    0.20 |   | 0    1    0.20 |   | 0      1    0.20   |

Step 2:

Calculate P^3:

P^3 = P^2 * P =

| 1.05   0    0.025 |   | 1    0    0.05 |   | 1.1025   0    0.0275 |

| 0      0    0.75   | * | 0    0    0.75 | = | 0         0    0.75   |

| 0      1    0.20   |   | 0    1    0.20 |   | 0         1    0.20   |

Step 3:

Check if all elements of P^3 are positive.

From the calculated P^3 matrix, we can see that all elements are positive. Therefore, P^3 is positive.

Since P^3 is positive, we can conclude that the stochastic matrix P is regular.

Now, let's find the steady-state matrix X of the Markov chain with the matrix of transition probabilities P.

Step 1:

Set up the equation X = XP.

Let X = [x1, x2, x3] be the steady-state matrix.

We have the equation:

X = XP

Step 2:

Solve for X.

From the equation X = XP, we can write the system of equations:

x1 = x1

x2 = 0.05x1 + 0.75x3

x3 = 0.05x1 + 0.2x3

Step 3:

Solve the system of equations.

To solve the system of equations, we can substitute the expressions for x2 and x3 into the third equation:

x3 = 0.05x1 + 0.2(0.05x1 + 0.2x3)

Simplifying:

x3 = 0.05x1 + 0.01x1 + 0.04x3

0.95x3 = 0.06x1

x3 = (0.06/0.95)x1

x3 = (0.06316)x1

Substituting the expression for x3 into the second equation:

x2 = 0.05x1 + 0.75(0.06316)x1

x2 = 0.05x1 + 0.04737x1

x2 = (0.09737)x1

Now, we have the expressions for x2 and x3 in terms of x1:

x2 = (0.09737)x1

x3 = (0.

06316)x1

Step 4:

Normalize the steady-state matrix.

To find the value of x1, x2, and x3, we need to normalize the steady-state matrix by setting the sum of the probabilities equal to 1.

x1 + x2 + x3 = 1

Substituting the expressions for x2 and x3:

x1 + (0.09737)x1 + (0.06316)x1 = 1

(1.16053)x1 = 1

x1 ≈ 0.8611

Substituting x1 back into the expressions for x2 and x3:

x2 ≈ (0.09737)(0.8611) ≈ 0.0837

x3 ≈ (0.06316)(0.8611) ≈ 0.0543

Therefore, the steady-state matrix X is approximately:

X ≈ [0.8611, 0.0837, 0.0543]

Learn more about Stochastic Matrix from the given link

https://brainly.com/question/31923171

#SPJ11

To determine whether the stochastic matrix P is regular, we need to check if there exists a positive integer k such that all elements of P^k are positive.

Given the stochastic matrix P:

P =

| 1    0    0.05 |

| 0    0    0.75 |

| 0    1    0.20 |

Step 1:

Calculate P^2:

P^2 = P * P =

| 1    0    0.05 |   | 1    0    0.05 |   | 1.05   0    0.025 |

| 0    0    0.75 | * | 0    0    0.75 | = | 0      0    0.75   |

| 0    1    0.20 |   | 0    1    0.20 |   | 0      1    0.20   |

Step 2:

Calculate P^3:

P^3 = P^2 * P =

| 1.05   0    0.025 |   | 1    0    0.05 |   | 1.1025   0    0.0275 |

| 0      0    0.75   | * | 0    0    0.75 | = | 0         0    0.75   |

| 0      1    0.20   |   | 0    1    0.20 |   | 0         1    0.20   |

Step 3:

Check if all elements of P^3 are positive.

From the calculated P^3 matrix, we can see that all elements are positive. Therefore, P^3 is positive.

Since P^3 is positive, we can conclude that the stochastic matrix P is regular.

Now, let's find the steady-state matrix X of the Markov chain with the matrix of transition probabilities P.

Step 1:

Set up the equation X = XP.

Let X = [x1, x2, x3] be the steady-state matrix.

We have the equation:

X = XP

Step 2:

Solve for X.

From the equation X = XP, we can write the system of equations:

x1 = x1

x2 = 0.05x1 + 0.75x3

x3 = 0.05x1 + 0.2x3

Step 3:

Solve the system of equations.

To solve the system of equations, we can substitute the expressions for x2 and x3 into the third equation:

x3 = 0.05x1 + 0.2(0.05x1 + 0.2x3)

Simplifying:

x3 = 0.05x1 + 0.01x1 + 0.04x3

0.95x3 = 0.06x1

x3 = (0.06/0.95)x1

x3 = (0.06316)x1

Substituting the expression for x3 into the second equation:

x2 = 0.05x1 + 0.75(0.06316)x1

x2 = 0.05x1 + 0.04737x1

x2 = (0.09737)x1

Now, we have the expressions for x2 and x3 in terms of x1:

x2 = (0.09737)x1

x3 = (0.

06316)x1

Step 4:

Normalize the steady-state matrix.

To find the value of x1, x2, and x3, we need to normalize the steady-state matrix by setting the sum of the probabilities equal to 1.

x1 + x2 + x3 = 1

Substituting the expressions for x2 and x3:

x1 + (0.09737)x1 + (0.06316)x1 = 1

(1.16053)x1 = 1

x1 ≈ 0.8611

Substituting x1 back into the expressions for x2 and x3:

x2 ≈ (0.09737)(0.8611) ≈ 0.0837

x3 ≈ (0.06316)(0.8611) ≈ 0.0543

Therefore, the steady-state matrix X is approximately:

X ≈ [0.8611, 0.0837, 0.0543]

Learn more about Stochastic Matrix from the given link

brainly.com/question/31923171

#SPJ11

Other Questions
_____ provide(s) an interface to the services provided by an operating system. a. shared memory b. system calls c. simulators d. system programs Laboratory Review Worksheet Part 1: Lab Q & A 1. What is the difference between the zygomatic process and the zygomatic arch? 2. List the four cranial bones that contain sinuses. 1.... 2.... 3..... 4..... 3. What are the two main functions of fontanelles? 1.... 2.... 4. Fill in the table. Structure Significance 1. Passageway for the internal carotid arteryForamen magnum 2. Passageway for 3. Passageway for cranial nerveOptic canal 4. Passageway for 5. Choose which type of vertebrae has the characteristic (select choices more than once) a. Cervical b. Thoracic c. Lumbar d. All a, b, and c 1. Transverse foramen 2. Costal facets 3. Bifid (split) spinous process 4. Broad, flat spinous process 6. An excessive thoracic curvature of the spine is known as a. lordosis b. kyphosis C. scoliosis 7. Which intervertebral ligament attaches to the posterior portion of each vertebral body? a. interspinous c. supraspinous b. anterior longitudinal d. posterior longitudinal YOUR TASKYou are required to submit a Case Study Analysis report for topic related to business analytics. This homework will result in a survey paper examining the use of business analytics in organization transformation.REQUIREMENTS:The Case study should be obtained from reputable journals, white papers, conference papers, reputable magazine articles, or any acceptable reference for academia.Your report should consist a summary of real-time business analytics solution implemented in industries.The summary should include the organizational details, the business transformation, problem and challenges endured by the organisation and how they introduced analytics.Write a summative report on how this organization successfully implemented analytics solution which may have improved their business processes, organizational transformation, higher productivity, business growth, enhanced competitiveness, to have more effective managerial decision making and increased globalization opportunities.EXAMPLES OF TOPICSHere are some examples of topics that you can undertake for your case study analysis. You may choose a topic of your interest as well.Data mining and social network analysis: a study of current use of data mining in social network analysis and future recommendations. How data mining can help the field of social networks?Data mining and blog analysis: a study of current use of data mining in blog analysis and future recommendations. How data mining can help in finding useful information out of huge amount of blogs? What is the difference/similarities between log, Web site and blog analysis?Data mining and Personalisation with user profiles: Data mining is increasingly being used for customisation and personalisation of information that are presented to users, for example, in online newspapers, e-commerce and others. How the use of user profiles and other profiles would increase the effectiveness? A study of issues, techniques and usage of data mining in this domain.Data mining and monitoring alarms: Data sets pertaining to many health and manufacturing situations are analysed with data mining techniques. What data mining techniques can be used in these situations and how can they be utilised in predicting the future based on alarms deployed with the outputs?Data mining and structural health monitoring: How and what data mining techniques are being used in civil engineering domain in particular to health monitoring of structures? A study of issues, techniques and usage of data mining in this domain.Data mining and road asset management: How and what data mining techniques are being used in road asset management? A study of issues, techniques and usage of data mining in this domain.INSTRUCTIONSWrite a 500-750 words report. Question 33 (Mandatory) Saved Which of the following memory types is best described as short term memory? A. Implicit B. Explicit C. Working D. AutobiographicalQuestion 34 (Mandatory) Saved In a clinical examination for aphasia if the examiner points to common objects and ask "what is this?" then the person is being tested for A. spontaneous speech B. word finding C. comprehension of spoken language D. repetition of spoken phrases Question 35 (Mandatory) Saved Volition, planning, purposive action and _____are types of executive function. A. orienting B. feature detection C. effective performance D. olfactionQuestion 36 (Mandatory) Saved The _____ seems particularly well suited for demonstrating the presence of deficits in executive function.A. design copying B. assembly C. Token Test D. Tinker Toy Test Child Age 1 year and 10 monthsIdentify one skill area appropriate to the childscurrent developmental stage e.g. rolling over, sitting, crawling,walkingDescribe how you provide a safe area that What eclipse feature can help you enter a method by displaying a list of methods that are available from an object or class? A 3.0-cm-tall object is placed 45.0 cm from a diverging lens having a focal length of magnitude 20.0 cm. a) What is the distance between the image and the lens? () b) Is the image real or virtual? () c) What is the height of the image? In an EM wave which component has the higher energy density? Depends, either one could have the larger energy density. Electric They have the same energy density Magnetic Find the Taylor polynomial for f(x) = (x 1) * sin(2(x 1)), xo = 1, n = 2. f(x) = P(x) = ax + bx+c a Submit the Answer 1 A cord is wrapped around the rim of a solid uniform wheel 0.270 m in radius and of mass 9.60 kg. A steady horizontal pull of 36.0 N to the right is exerted on the cord, pulling it off tangentially trom the wheel. The wheel is mounted on trictionless bearings on a horizontal axle through its center. - Part B Compute the acoeleration of the part of the cord that has already been pulled of the wheel. Express your answer in radians per second squared. - Part C Find the magnitude of the force that the axle exerts on the wheel. Express your answer in newtons. - Part D Find the direction of the force that the axle exerts on the wheel. Express your answer in degrees. Part E Which of the answers in parts (A). (B), (C) and (D) would change if the pull were upward instead of horizontal? Review Chapter 18 of thetextand the following article from the University Library:"The biopsychosocial model of addiction and substance use disorder."1. Evaluatetheinteractiveelements of the biopsychosocial modelas they applytoanalcohol use disorder.2. Discusswhat you believe arethe current best practices to treat alcohol use disorder from a biopsychosocial perspective.3. Provide support from the article. In your opinion, do you believe it is ethical to mandate individuals with an alcohol use disorder to attend therapy and/or take medications designed to curb cravings or make them violently ill if they drink alcohol? Why or why not?PLEASE NUMBER THE ANSWER TO THE QUESTIONS The HPA Axis governs which emotion? O DisgustO Fear O Stress O Happiness Two mutually exclusive design alternatives are being considered. The estimated cash flows for each alternative are given below. The MARR is 12% per year. The decision-maker can select one of these alternatives or decide to select none of them. Make a recommendation based on the following methods.Design Y Design ZInvestment cost $140,000 $275,000Annual revenue $56,233 $94,624Annual cost $10,140 $23,478 Useful Me 15 years 15 yearsSalvage value $14,700 $33,000Net PW $176,619 $215,595a. Based on PW method, Design is more economical.b. The modified B/C ratio of Design Y is (Round to two decimal places)The modified B/C ration of Design Z is (Round to two decimal places)o. The incremental B/C ratio is (Round to two decimal places) Therefore, based on the BC ratio method, Design is more economicald. The discounted payback period of Design Y is The discounted payback period of Design 2 is years (Round to one decimal place) years (Round to one decimal place)Therefore, based on the payback period method, Design would be preferred(e) Why could the recommendations based on the payback period method be different from the other two methods?OA because the payback period gives more weight to the cash flows after the payback periodOB because the payback period method ignores the cash flows after the payback period QUESTION 3 For the following three measurements trials L1 L2 L3 Length (cm) 9.3 9.7 9.5 Calculate the absolute error (AL)? O 1.0.14 O 2.0.1 O 3.0.0 O 4.0.133 O 5.0.13 In March June 2020, we had shortages of items like toilet paper and disinfecting wipes. Does a shortage imply that the price of the item is above or below the equilibrium price? Please give an explanation. You should include a graph of demand and supply with your explanation. There should be only one graph with both the demand and the supply curves. You should not include more than one graph. Which of the following is NOT deductible as a miscellaneous itemized deduction? A) Gambling losses to the extent of gambling winnings B) Deduction for unrecovered basis in a commercial annuity C) Appraisal fee for a charitable contribution D) Impairment-related work expense of a handicapped individual How does Mandela connect to his audience? Compare and contrast the "power elite" and "pluralist" models ofpower in society. 11. Negate the following statements. Make sure that your answer is writtin as simply as possible (you need not show any work). (a) If an integer n is a multiple of both 4 and 5, then n is a multiple of 10. (b) Either every real number is greater than 7, or 2 is even and 11 is odd. (Note the location of the comma!) (c) Either every real number is greater than 7 or 2 is even, and 11 is odd. This unique asset that has helped Next Door Cellular gain acompetitive advantage will be considered as a rare resource in theVRIO framework. A resource is rare if the number of firms thatpossess it is less than the number of firms it would require to reach a state of perfect competition.Some of the best engineering and car companies are in Germany. Thus, it can be concluded that Germany has a _____ in the automobile industry.capital gainnational competitive advantagetrade surplusliability of foreignness Steam Workshop Downloader